此页面是自动翻译的,不保证翻译的准确性。请参阅 英文版 对于源文本。

Comparison of Proximal Contacts and Contours in Class II Composite Restoration With Pre-cured Composite Inserts Versus Contact Making Instrument Technique. A Randomized Control Clinical Trial.

2022年5月18日 更新者:Foundation University Islamabad

The objective of this randomized control cinical trial will be to compare the effectiveness of precured composite inserts in obtaining tight and adequate conatacts in class 2 restorations when compared with the contact making instrument technique among patients treated at the operative depatment of Foundation Umiversity College of Dentistry.

This is a single centre based randomized control clinical trial in which intervention arm 1 will get there class 2 restoration done with precured composite inserts and interention arm 2 will recieve treatment with contact making instrument technique. The control arm will recieve restoration using the conventional composite layering technique.

研究概览

详细说明

Study design : randomized control clinical trial with three intervention arms

Study setting : operative department , foundation university college of dentistry Islamabad Pakistan.

Sample size : the sample size was calculated using the NCSS PASS software. A total od 180 patients will be tested in the study divided in three groups of 60 patients each. Consent will be taken from pateints on a standardized form approved by the ethics review committe in the operatory where the initial assessment will be done.

Procedure:

  1. number of operaters will be restricted two, with similar level of experience in order to minimize operater variation
  2. the investigator and co investigator will calibrate each other on the sequence of the procedure and assessment to enhance standardization of procedure
  3. local anaesthesia will be given to patients using lidocaine 2% solution available for dental use in 1.8 ml carpule
  4. rubber dam will used for isolation and moisture control in the working field.
  5. the tooth to be restored will be seperated from the adjacent tooth using wooden wedges.this will allow seperation of teeth.
  6. cavity preparation will be done using a high speed handpiece(W&H) with a round bur(prima) (no1/6 or 1/4). After initial penetration through enamel the carious lesion will be excavated using a a carbide bur in a slow speed handpiece.

    after caries removal any unsupported enamel at the gingival floor will be removed using a gingival margin trimmer.

    the cavity shape will be finalized using a pear shaped bur(243).

  7. the width of the final cavity will be measured using a perio probe from the buccal or labial cavo surface margin. Only cavities with less than 1/2 the width of the distance or less from the buccal or lingual cusp tip will be included in the study.
  8. sectional metal matrix (unimatrix by TDV Brazil,1/4" by 0.0015,1/4" by.002,height and thickness of matrix) will be applied after removing the previously placed wooden wedges. The wedges will be reintroduced after sectional matrix application.
  9. the cavity will be etched using 37% phosphoric acid etchant(30 seconds enamel and 15 seconds dentine) followed by rinsing for 30 seconds with the triple syringe. the cavity will be gently air dried while keep a dried cotton pellet in the cavity to absorb excess moisure for 30 to 45 seconds.Prime and Bond NT (Dentsply) adhesive will be applied to the cavity followed by curing for 20 seconds with an led based curing light (O-light,DTE wavelength of 400nm visible blue light). The cavities in all intervention arms will be restored with neo spectre NT composite(dentsply). (the detail of each intervention arm is given under their respective headings)
  10. after the cavities are filled the matrix band and the wedges will be removed.the cavity will be finished using diamond burs and composite finishing spirals(azdent). occlusal adjustment will be done where needed using articulating paper.
  11. the final restoration will be polished using diamond polishing paste(ultradent) and goat hair brushes (ultradent)

Assessment

  1. assessment will be done by passing waxed dental floss between the filling and adjacent tooth by a single independent assessor blinded to the treatment allocation.
  2. outcome will be assessed using the contact tightness and contour component of the modified USPHS rating scale
  3. data collection will be done at the end of the treatment using a printed porforma for recording the study variables.

Data analysis

  1. will be done using spss 26
  2. for continouse variables like age and cavity wifth and depth , mean and standard deviations will be computed.

    comparison of these variable will be done by one way anova test

  3. for categorical variables like gender, type of tooth,location of cavity,contact tightness and contour(outcome variables) frequencies in percentages will be reported. these variables will be compared using kruskal-wallis test at 0.05 level of significance

研究类型

介入性

注册 (预期的)

180

阶段

  • 不适用

联系人和位置

本节提供了进行研究的人员的详细联系信息,以及有关进行该研究的地点的信息。

学习联系方式

研究联系人备份

参与标准

研究人员寻找符合特定描述的人,称为资格标准。这些标准的一些例子是一个人的一般健康状况或先前的治疗。

资格标准

适合学习的年龄

12年 至 55年 (孩子、成人)

接受健康志愿者

不

有资格学习的性别

全部

描述

Inclusion criteria

  1. patient requiring treatment for class 2 cavity
  2. patient age 12 to 55 years
  3. Maxillary and Mandibular first and second premolar
  4. Maxillary and Mandibular first and second molar
  5. Maximum occlusal cavo surface width of 2/3rd of intercuspal width
  6. Cavity depth upto 3/4th of occlusocervical length measured from diagnostic radiograph
  7. Teeth with adjacent fully erupted teeth adjacent to a cavity side Exclusion criteria

1)Mentally and physically handicapped patient 2)Pregnant females 3)Patients with naturally spaced teeth 4)Patients with moderate or advanced periodontitis 5)Endodontically treated teeth 6)Teeth with excessive occlusal wear and erosion of teeth 7)Tooth adjacent to cavity side is missing 8)Teeth with orhtodontic bands and brackets 9)Tooth adjacent to cavity side is restored

学习计划

本节提供研究计划的详细信息,包括研究的设计方式和研究的衡量标准。

研究是如何设计的?

设计细节

  • 主要用途:治疗
  • 分配:随机化
  • 介入模型:并行分配
  • 屏蔽:双倍的

武器和干预

参与者组/臂
干预/治疗
实验性的:Precure composite insert technique
After curing of bonding agent a 2mm increment of composite will be placed on the gingival floor of the cavity and cured. a measured volume of composite(3mm height and 2mm width) will be cured outside the oral cavity on a flat plastic instrument for 40 seconds. a second increment of composite will be placed on the cavity and the precured composite will be pressed in the uncured increment and pressed outward against the matrix band and light cured for 20 seconds the rest of the cavity will be filled using the oblique layering technique.
After curing of bonding agent a 2mm increment of composite will be placed on the gingival floor of the cavity and cured. a measured volume of composite(3mm height and 2mm width) will be cured outside the oral cavity on a flat plastic instrument for 40 seconds. a second increment of composite will be placed on the cavity and the precured composite will be pressed in the uncured increment and pressed outward against the matrix band and light cured for 20 seconds the rest of the cavity will be filled using the oblique layering technique.
实验性的:Contact Making Instrument

a 1-2mm increment of the composite will be placed in the gingival floor of the proxial box.

a contact forming instrument will be placed in this uncured increment and an outward force will be applied using the instrument from the inside of the matrix band. The composite will then be cured for 20 seconds to achieve a tight contact.

a 1-2mm increment of the composite will be placed in the gingival floor of the proxial box.

a contact forming instrument will be placed in this uncured increment and an outward force will be applied using the instrument from the inside of the matrix band. The composite will then be cured for 20 seconds to achieve a tight contact.

有源比较器:Incremental composite layering technique
Increments will be placed in 1-2mm increments in oblique layering manner by a flat plastic instrument and condenser .Each increment will be cured for 20 seconds till the cavity is slightly overfilled.
Increments will be placed in 1-2mm increments in oblique layering manner by a flat plastic instrument and condenser .Each increment will be cured for 20 seconds till the cavity is slightly overfilled.

研究衡量的是什么?

主要结果指标

结果测量
措施说明
大体时间
Contact tightness and Contour of Class 2 composite restoration
大体时间:1 day
The contact tightness and contour of the filling will be assessed using the modified united states public health service system rating scale which has is used in studies on dental materials.
1 day

合作者和调查者

在这里您可以找到参与这项研究的人员和组织。

研究记录日期

这些日期跟踪向 ClinicalTrials.gov 提交研究记录和摘要结果的进度。研究记录和报告的结果由国家医学图书馆 (NLM) 审查,以确保它们在发布到公共网站之前符合特定的质量控制标准。

研究主要日期

学习开始 (预期的)

2022年12月1日

初级完成 (预期的)

2023年3月30日

研究完成 (预期的)

2024年3月31日

研究注册日期

首次提交

2022年5月18日

首先提交符合 QC 标准的

2022年5月18日

首次发布 (实际的)

2022年5月23日

研究记录更新

最后更新发布 (实际的)

2022年5月23日

上次提交的符合 QC 标准的更新

2022年5月18日

最后验证

2022年5月1日

更多信息

与本研究相关的术语

其他相关的 MeSH 术语

其他研究编号

  • FUI/CTR/2022/7

药物和器械信息、研究文件

研究美国 FDA 监管的药品

不

研究美国 FDA 监管的设备产品

不

此信息直接从 clinicaltrials.gov 网站检索,没有任何更改。如果您有任何更改、删除或更新研究详细信息的请求,请联系 register@clinicaltrials.gov. clinicaltrials.gov 上实施更改,我们的网站上也会自动更新.

订阅