此页面是自动翻译的,不保证翻译的准确性。请参阅 英文版 对于源文本。

Electrical Impedance Tomography-Guided Identification of the Optimal Lateral Position in Postoperative ARDS

2026年7月30日 更新者:Ruijin Hospital

Effect of Left Lateral, Right Lateral, and Supine Positioning on Ventilation-Perfusion Matching Assessed by Electrical Impedance Tomography in Adult Postoperative Abdominal Surgery Patients With ARDS: A Prospective Randomized Crossover Physiological Study

This prospective, randomized crossover physiological study evaluates the effects of lateral positioning (left lateral position and right lateral position) versus the supine position on ventilation-perfusion (V/Q) matching in adult postoperative abdominal surgery participants with acute respiratory distress syndrome (ARDS). Bedside electrical impedance tomography (EIT) will be used to quantify regional ventilation and perfusion (perfusion derived from an intravenous tracer bolus administered during a brief breath-hold) and to calculate global "normal V/Q" (normal V/Q, %). Oxygenation, respiratory mechanics (when applicable), and hemodynamics will be recorded concurrently. Feasibility and safety of the positioning protocol will also be assessed.

研究概览

详细说明

Postoperative abdominal surgery patients commonly develop atelectasis, diaphragmatic dysfunction, and heterogeneous ventilation. When complicated by ARDS, ventilation-perfusion mismatch may worsen oxygenation and ventilatory efficiency. Prone positioning may be limited in this population because of abdominal incisions, drains, and intra-abdominal pressure concerns. Lateral positioning is frequently used in critical care and may improve V/Q coupling by changing gravitational gradients, chest wall mechanics, and pulmonary blood flow distribution; however, quantitative bedside evidence comparing left and right lateral positions is limited.

EIT is a radiation-free bedside functional imaging technique that can continuously monitor regional ventilation. In combination with a brief breath-hold and an intravenous tracer bolus, EIT can derive perfusion-related signals, enabling bedside quantification of V/Q matching.

In this randomized crossover study, each participant undergoes three body positions-supine position, left lateral position, and right lateral position-in a randomized order. The sequence (including whether left lateral or right lateral is performed first) is determined by random-number-based randomization. Each position stage lasts 60 minutes. After entering each position, participants are stabilized for 45 minutes before EIT measurements. EIT ventilation recording is obtained after stabilization, followed by an EIT perfusion assessment performed during a breath-hold of at least 8 seconds (actual breath-hold time recorded). During the breath-hold, a rapid intravenous tracer bolus is administered: 10 mL of 10% sodium chloride solution or 10 mL of 5% sodium bicarbonate solution, injected over 2-3 seconds via a central or peripheral venous line. Between position stages, participants return to the supine position for a 45-minute washout period. The primary endpoint is the difference in global normal V/Q (%) among the three positions. Secondary endpoints include other EIT-derived V/Q indices, oxygenation indices, respiratory mechanics, hemodynamic changes, and feasibility/safety outcomes. The primary statistical analysis required a minimum of 22 evaluable participants. Recruitment was planned to achieve at least this number to account for potential dropout. Recruitment would be terminated once sufficient evaluable subjects were obtained.

研究类型

介入性

注册 (估计的)

22

阶段

  • 不适用

联系人和位置

本节提供了进行研究的人员的详细联系信息,以及有关进行该研究的地点的信息。

学习联系方式

学习地点

      • Shanghai、中国
        • 招聘中
        • Ruijin Hospital, Shanghai Jiao Tong University School of Medicine, Department of Critical Care Medicine
        • 接触:

参与标准

研究人员寻找符合特定描述的人,称为资格标准。这些标准的一些例子是一个人的一般健康状况或先前的治疗。

资格标准

适合学习的年龄

  • 成人
  • 年长者

接受健康志愿者

不

描述

Inclusion Criteria:

  • Age ≥18 years
  • Postoperative abdominal surgery patients admitted to the ICU with ARDS (Berlin definition)
  • Considered able to tolerate protocolized position changes by the treating team
  • EIT belt placement and protocol procedures feasible
  • Informed consent obtained from the patient or legally authorized representative

Exclusion Criteria:

  • Contraindication to lateral positioning (e.g., unstable spine, uncontrolled bleeding, open abdomen, high-risk surgical wound condition)
  • Severe hemodynamic instability or other conditions making participation unsafe
  • High risk of airway/vascular line/drain dislodgement not manageable
  • Pregnancy
  • Refusal of informed consent
  • Any other condition deemed inappropriate by investigators

学习计划

本节提供研究计划的详细信息,包括研究的设计方式和研究的衡量标准。

研究是如何设计的?

设计细节

  • 主要用途:治疗
  • 分配:随机化
  • 介入模型:交叉作业
  • 屏蔽:无(打开标签)

武器和干预

参与者组/臂
干预/治疗
实验性的:Arm 1: Supine Position
Supine position with protocolized stabilization and EIT ventilation/perfusion measurements.

Using a randomized crossover design, all subjects undergo three body position stages in random order. Each position (supine, left lateral, right lateral) is maintained for 60 minutes. Vital signs are stabilized per protocol, followed by EIT assessment of ventilation-perfusion matching.

  1. Position stage duration: 60 minutes.
  2. Stabilization period before measurement: 45 minutes after position change.
  3. Washout: 45-minute supine washout period between position stages.
  4. EIT ventilation measurement: after stabilization in each position.
  5. EIT perfusion measurement: during breath-hold ≥8 seconds (actual breath-hold time recorded.
  6. Tracer bolus: 10 mL of 10% sodium chloride solution OR 10 mL of 5% sodium bicarbonate solution, injected over 2-3 seconds via central or peripheral venous line.
实验性的:Arm 2: Left Lateral Position
Left lateral position with protocolized stabilization and EIT ventilation/perfusion measurements.

Using a randomized crossover design, all subjects undergo three body position stages in random order. Each position (supine, left lateral, right lateral) is maintained for 60 minutes. Vital signs are stabilized per protocol, followed by EIT assessment of ventilation-perfusion matching.

  1. Position stage duration: 60 minutes.
  2. Stabilization period before measurement: 45 minutes after position change.
  3. Washout: 45-minute supine washout period between position stages.
  4. EIT ventilation measurement: after stabilization in each position.
  5. EIT perfusion measurement: during breath-hold ≥8 seconds (actual breath-hold time recorded.
  6. Tracer bolus: 10 mL of 10% sodium chloride solution OR 10 mL of 5% sodium bicarbonate solution, injected over 2-3 seconds via central or peripheral venous line.
实验性的:Right Lateral Position
Right lateral position with protocolized stabilization and EIT ventilation/perfusion measurements.

Using a randomized crossover design, all subjects undergo three body position stages in random order. Each position (supine, left lateral, right lateral) is maintained for 60 minutes. Vital signs are stabilized per protocol, followed by EIT assessment of ventilation-perfusion matching.

  1. Position stage duration: 60 minutes.
  2. Stabilization period before measurement: 45 minutes after position change.
  3. Washout: 45-minute supine washout period between position stages.
  4. EIT ventilation measurement: after stabilization in each position.
  5. EIT perfusion measurement: during breath-hold ≥8 seconds (actual breath-hold time recorded.
  6. Tracer bolus: 10 mL of 10% sodium chloride solution OR 10 mL of 5% sodium bicarbonate solution, injected over 2-3 seconds via central or peripheral venous line.

研究衡量的是什么?

主要结果指标

结果测量
措施说明
大体时间
Global normal V/Q (%) derived from electrical impedance tomography (EIT)
大体时间:Post-stabilization in each body position (supine, left lateral, right lateral); assessments performed once per 60-minute positional stage, with comparative data reported for each position time point.
The percentage of lung pixels categorized as "normal ventilation-perfusion (V/Q)" according to pre-defined ventilation and perfusion signals acquired via EIT.
Post-stabilization in each body position (supine, left lateral, right lateral); assessments performed once per 60-minute positional stage, with comparative data reported for each position time point.

次要结果测量

结果测量
措施说明
大体时间
EIT-derived V/Q mismatch components (shunt-like lung pixel percentage, dead-space-like lung pixel percentage).
大体时间:Single assessment time point after respiratory and hemodynamic stabilization within each 60-minute positional stage (left lateral, right lateral); all V/Q mismatch data will be reported separately per positional time point for inter-position comparison.

Quantitative ventilation-perfusion mismatch metrics calculated from electrical impedance tomography (EIT) ventilation and perfusion signals, unit: %.

Shunt-like %: Proportion of lung pixels with high perfusion but negligible ventilation Dead-space-like %: Proportion of lung pixels with robust ventilation but minimal perfusion These two indicators quantify the severity of pulmonary gas exchange disturbance under different body positions.

Single assessment time point after respiratory and hemodynamic stabilization within each 60-minute positional stage (left lateral, right lateral); all V/Q mismatch data will be reported separately per positional time point for inter-position comparison.
EIT-derived regional ventilation distribution indices
大体时间:Single assessment time point after hemodynamic and respiratory stabilization within each 60-minute positional stage (left lateral, right lateral); comparative data of all indices will be reported separately for each positional assessment time point.
A composite set of regional ventilation distribution parameters calculated from EIT signals, including center of ventilation (CoVX, CoVY), dorsal ventilation ratio (DVR), global inhomogeneity index (GI), ventral/dorsal impedance ratio, and ventilation fraction of four predefined ventrodorsal lung regions (ventral, mid-ventral, mid-dorsal, dorsal, expressed as %), used to evaluate regional ventilation uniformity and spatial distribution.
Single assessment time point after hemodynamic and respiratory stabilization within each 60-minute positional stage (left lateral, right lateral); comparative data of all indices will be reported separately for each positional assessment time point.
EIT-derived regional perfusion distribution indices
大体时间:Single perfusion assessment time point after respiratory and hemodynamic stabilization within each 60-minute positional stage (left lateral, right lateral); all perfusion index data will be reported separately for each positional assessment time point.
Quantitative perfusion parameters calculated from electrical impedance tomography (EIT) perfusion signals, including perfusion center coordinates (CoPX, CoPY), dorsal perfusion ratio (DPR), global perfusion inhomogeneity index, regional perfusion delay, and perfusion percentage of four predefined ventrodorsal lung regions (ventral, mid-ventral, mid-dorsal, dorsal, unit: %). These indices quantitatively characterize spatial perfusion redistribution, perfusion homogeneity, and temporal perfusion lag in supine, left lateral and right lateral positions.
Single perfusion assessment time point after respiratory and hemodynamic stabilization within each 60-minute positional stage (left lateral, right lateral); all perfusion index data will be reported separately for each positional assessment time point.
Oxygenation index (PaO₂/FiO₂ ratio if arterial blood gas sampling is feasible; SpO₂/FiO₂ ratio as an alternative surrogate index).
大体时间:Single assessment time point after respiratory and hemodynamic stabilization within each 60-minute positional stage (supine, left lateral, right lateral); oxygenation index values will be reported separately for each positional assessment time point.
Oxygenation index is calculated to reflect systemic oxygenation status. PaO₂/FiO₂ ratio (unit: mmHg) will be prioritized when arterial blood gas data are available; if arterial blood gas cannot be obtained, SpO₂/FiO₂ ratio will be adopted as the substitute parameter.
Single assessment time point after respiratory and hemodynamic stabilization within each 60-minute positional stage (supine, left lateral, right lateral); oxygenation index values will be reported separately for each positional assessment time point.
Ventilator-related pressure parameters (plateau pressure, driving pressure).
大体时间:Single assessment time point after respiratory and hemodynamic stabilization within each 60-minute positional stage (supine, left lateral, right lateral); all pressure values will be reported separately for each positional assessment time point.

Static respiratory pressure indicators automatically recorded by mechanical ventilator, only collected from participants receiving invasive mechanical ventilation.

  • Plateau pressure: Static airway plateau pressure, unit: cmH₂O
  • Driving pressure: Calculated as plateau pressure minus PEEP, unit: cmH₂O These two pressure metrics reflect alveolar mechanical load under controlled ventilation.
Single assessment time point after respiratory and hemodynamic stabilization within each 60-minute positional stage (supine, left lateral, right lateral); all pressure values will be reported separately for each positional assessment time point.
Respiratory system compliance (ventilator-derived parameter).
大体时间:Single assessment time point after respiratory and hemodynamic stabilization within each 60-minute positional stage (supine, left lateral, right lateral; all compliance values will be reported separately for each positional assessment time point.
A comprehensive respiratory mechanics index calculated as tidal volume divided by driving pressure, unit: mL/cmH₂O. Measurement is limited to invasively ventilated participants to evaluate the overall distensibility of lungs and chest wall.
Single assessment time point after respiratory and hemodynamic stabilization within each 60-minute positional stage (supine, left lateral, right lateral; all compliance values will be reported separately for each positional assessment time point.
Circulatory monitoring parameters (heart rate, mean arterial pressure, vasopressor use if available).
大体时间:Two predefined assessment time points within each 60-minute positional stage (supine, left lateral, right lateral): 1) after full respiratory and hemodynamic stabilization; 2) around breath-hold and contrast bolus injection for perfusion acquisition.

Continuous hemodynamic readings collected via bedside invasive monitor for circulatory assessment.

  • Heart rate: unit: beats per minute (bpm)
  • Mean arterial pressure (MAP): unit: mmHg These two parameters reflect systemic circulatory stability during positional adjustment and EIT perfusion measurement.
  • Binary categorical indicator for vasopressor administration status and continuous dosage recording of vasopressors; administration status (yes/no) and dosage (μg/kg/min) to evaluate circulatory support intensity.
Two predefined assessment time points within each 60-minute positional stage (supine, left lateral, right lateral): 1) after full respiratory and hemodynamic stabilization; 2) around breath-hold and contrast bolus injection for perfusion acquisition.
Proportion of participants completing all randomized 60-minute positional stages and inter-position washout periods.
大体时间:Through study positional phase completion (from initiation of the first positional stage to the end of the final washout period following the last positional assessment); completion status data will be summarized across all participants.
Binary participant-level endpoint (unit: proportion [%]) calculated as the number of participants who fully finished all three predefined body position stages and corresponding washout intervals divided by total enrolled participants. Used to assess overall study procedural feasibility.
Through study positional phase completion (from initiation of the first positional stage to the end of the final washout period following the last positional assessment); completion status data will be summarized across all participants.
Number of participants with successful acquisition of analyzable EIT imaging datasets.
大体时间:Through study positional phase completion (from initiation of the first positional stage to the end of the final washout period following the last positional assessment); successful EIT acquisition counts will be aggregated for all enrolled subjects.
Count-based feasibility metric (unit: number of participants). Defined as participants with complete, artifact-free EIT ventilation and perfusion images eligible for post-hoc quantitative regional lung function analysis.
Through study positional phase completion (from initiation of the first positional stage to the end of the final washout period following the last positional assessment); successful EIT acquisition counts will be aggregated for all enrolled subjects.
Proportion of participants capable of maintaining breath-hold for at least 8 seconds during EIT perfusion imaging.
大体时间:Through positional phase completion (from first positional stage start to final post-position washout end); breath-hold compliance proportions summarized across all perfusion assessment time points.
Proportional feasibility endpoint (unit: proportion [%]). Calculated as participants who sustained ≥8-second breath-hold during contrast bolus perfusion scans divided by all participants undergoing EIT perfusion measurement.
Through positional phase completion (from first positional stage start to final post-position washout end); breath-hold compliance proportions summarized across all perfusion assessment time points.
Number of participants with any procedure-related adverse event (desaturation, hypotension, arrhythmia, accidental tube/line/drain displacement).
大体时间:Through positional phase completion (from first positional stage start to final post-position washout end); all adverse events captured and tallied during positional testing.
Safety count endpoint (unit: number of participants). Captures all acute adverse events directly associated with positional changes and EIT image acquisition during the study protocol.
Through positional phase completion (from first positional stage start to final post-position washout end); all adverse events captured and tallied during positional testing.
Number of participants with early study termination secondary to positional intolerance.
大体时间:Through positional phase completion (from first positional stage start to final post-position washout end); all early termination events documented and counted for pooled safety analysis.
Tolerability safety metric (unit: number of participants). Records participants withdrawn prematurely from positional testing due to respiratory, hemodynamic or clinical intolerance to supine, left lateral or right lateral positioning.
Through positional phase completion (from first positional stage start to final post-position washout end); all early termination events documented and counted for pooled safety analysis.

合作者和调查者

在这里您可以找到参与这项研究的人员和组织。

研究记录日期

这些日期跟踪向 ClinicalTrials.gov 提交研究记录和摘要结果的进度。研究记录和报告的结果由国家医学图书馆 (NLM) 审查,以确保它们在发布到公共网站之前符合特定的质量控制标准。

研究主要日期

学习开始 (实际的)

2026年6月28日

初级完成 (估计的)

2026年10月31日

研究完成 (估计的)

2026年10月31日

研究注册日期

首次提交

2026年6月8日

首先提交符合 QC 标准的

2026年6月22日

首次发布 (实际的)

2026年6月25日

研究记录更新

最后更新发布 (实际的)

2026年8月3日

上次提交的符合 QC 标准的更新

2026年7月30日

最后验证

2026年6月1日

更多信息

与本研究相关的术语

计划个人参与者数据 (IPD)

计划共享个人参与者数据 (IPD)?

是的

药物和器械信息、研究文件

研究美国 FDA 监管的药品

不

研究美国 FDA 监管的设备产品

不

此信息直接从 clinicaltrials.gov 网站检索,没有任何更改。如果您有任何更改、删除或更新研究详细信息的请求,请联系 register@clinicaltrials.gov. clinicaltrials.gov 上实施更改,我们的网站上也会自动更新.

订阅