Smart Scaffolds, Stronger Smiles Smarter Healing: AI-Boosted Multiphasic Scaffold Design for PDL Regeneration
AI- Powered Multiphasic 3D Printed Scaffold for Periodontal Defect Regeneration
The periodontal ligament is vital for tooth support, and its loss, frequently resulting from periodontitis, trauma, or endodontic lesions, presents a significant clinical challenge; global cases of severe periodontitis increased by 91.54% from 1990 to 2021. Conventional monophasic scaffolds offer a uniform environment, limiting their efficacy in regenerating complex, multi-tissue structures like the periodontium. This study introduces an AI-enhanced, 3D multi-phasic scaffold to precisely restore the periodontal apparatus and overcome the limitations of non-uniform tissue growth seen in some multiphasic designs. The methodology involved sequential steps: high-resolution CBCT and intraoral scans to capture defect geometry; precise defect mapping to define the Target Regeneration Volume; and AI Mesh mixer implementation to generate three distinct, seamlessly graded lattice zones. This AI-driven design ensures Optimal Biomechanics (Precision) by perfectly matching the scaffold's stiffness to native tissue, thereby eliminating stress-shielding.
調査の概要
状態
詳細な説明
Background: The global prevalence of severe periodontitis increased by 91.54% between 1990 and 2021, driven primarily by population growth and population ageing, and now affects more than one billion people worldwide . Left untreated, periodontitis progressively destroys the attachment apparatus and is a leading cause of tooth loss. Conventional regenerative therapies rely largely on monophasic scaffolds, which impose a single, uniform biological and structural environment and therefore struggle to reproduce the layered, multi-tissue architecture of the periodontium. Study Problem: The periodontium is a composite of three histologically and mechanically distinct tissues - alveolar bone, the periodontal ligament (PDL), and cementum - each of which requires a different stiffness, porosity, and biochemical microenvironment for optimal regeneration. Monophasic scaffolds cannot satisfy this requirement simultaneously, which frequently results in fibrous encapsulation, incomplete integration, or stress-shielding. Objectives: This thesis examines the design, fabrication rationale, and clinical evaluation of an Artificial-Intelligence (AI)-boosted three-dimensional (3D) multiphasic scaffold intended to achieve simultaneous, tailored regeneration of alveolar bone, PDL, and cementum through a graded lattice architecture matched to native tissue stiffness. Methodology: The target regeneration volume was defined using high-resolution Cone-Beam Computed Tomography (CBCT) and intraoral optical scanning, processed through AI-assisted defect-segmentation software. A tri-zonal multiphasic scaffold - an outer bone-directed zone, a middle PDL-directed zone, and an inner cementum-directed zone - was generated and produced by 3D 2 Smart Scaffolds, Stronger Smiles bioprinting using biocompatible polymer and bio-ceramic bio-inks, then surgically placed in patients with severe infrabony defects. Clinical and radiographic outcomes were assessed at 2, 6, and 12 months post-operatively.
研究の種類
入学 (推定)
段階
- フェーズ 1
連絡先と場所
研究場所
-
-
-
Giza、エジプト
- Giza
-
-
参加基準
適格基準
就学可能な年齢
- 子
- 大人
- 高齢者
健康ボランティアの受け入れ
受講資格のある性別
説明
Inclusion Criteria:
- Normal Lab investigation
Exclusion Criteria:
- Bone diseases , Bleeding disorders
研究計画
研究はどのように設計されていますか?
デザインの詳細
- 主な目的:処理
- 割り当て:なし
- 介入モデル:単一グループの割り当て
- マスキング:なし(オープンラベル)
武器と介入
参加者グループ / アーム |
介入・治療 |
|---|---|
|
実験的:1 patient
|
Patients underwent minimally invasive surgical intervention. Following preoperative diagnosis of severe infrabony defects exhibiting mobility and loss of periodontal support, a minimally invasive flap was elevated, and the defect was thoroughly debrided and prepared. The custom-printed multiphasic scaffold was seated into the defect with precision to ensure stability, and complete primary flap closure was achieved [ |
この研究は何を測定していますか?
主要な結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
Probing Depth
時間枠:12 months
|
the measured distance from the edge of the gum (gingival margin) to the bottom of the gum pocket or sulcus. |
12 months
|
|
Bone quality , PDL formation
時間枠:2,6,12 month
|
refers to the density and architectural composition of the jawbone, which determines its strength and ability to stabilize a dental implant |
2,6,12 month
|
協力者と研究者
出版物と役立つリンク
一般刊行物
- Lee CH, Hajibandeh J, Suzuki T, Fan A, Shang P, Mao JJ. Three-dimensional printed multiphase scaffolds for regeneration of periodontium complex. Tissue Eng Part A. 2014 Apr;20(7-8):1342-51. doi: 10.1089/ten.TEA.2013.0386. Epub 2014 Feb 6.
- Sowmya S, Mony U, Jayachandran P, Reshma S, Kumar RA, Arzate H, Nair SV, Jayakumar R. Tri-Layered Nanocomposite Hydrogel Scaffold for the Concurrent Regeneration of Cementum, Periodontal Ligament, and Alveolar Bone. Adv Healthc Mater. 2017 Apr;6(7). doi: 10.1002/adhm.201601251. Epub 2017 Jan 27.
研究記録日
主要日程の研究
研究開始 (実際)
一次修了 (実際)
研究の完了 (推定)
試験登録日
最初に提出
QC基準を満たした最初の提出物
最初の投稿 (実際)
学習記録の更新
投稿された最後の更新 (実際)
QC基準を満たした最後の更新が送信されました
最終確認日
詳しくは
本研究に関する用語
その他の研究ID番号
- FWA00025573
個々の参加者データ (IPD) の計画
個々の参加者データ (IPD) を共有する予定はありますか?
IPD プランの説明
Not decided yet
医薬品およびデバイス情報、研究文書
米国FDA規制医薬品の研究
米国FDA規制機器製品の研究
米国で製造され、米国から輸出された製品。
この情報は、Web サイト clinicaltrials.gov から変更なしで直接取得したものです。研究の詳細を変更、削除、または更新するリクエストがある場合は、register@clinicaltrials.gov。 までご連絡ください。 clinicaltrials.gov に変更が加えられるとすぐに、ウェブサイトでも自動的に更新されます。