- ICH GCP
- US Clinical Trials Registry
- Klinisk utprøving NCT07845006
Smart Scaffolds, Stronger Smiles Smarter Healing: AI-Boosted Multiphasic Scaffold Design for PDL Regeneration
AI- Powered Multiphasic 3D Printed Scaffold for Periodontal Defect Regeneration
The periodontal ligament is vital for tooth support, and its loss, frequently resulting from periodontitis, trauma, or endodontic lesions, presents a significant clinical challenge; global cases of severe periodontitis increased by 91.54% from 1990 to 2021. Conventional monophasic scaffolds offer a uniform environment, limiting their efficacy in regenerating complex, multi-tissue structures like the periodontium. This study introduces an AI-enhanced, 3D multi-phasic scaffold to precisely restore the periodontal apparatus and overcome the limitations of non-uniform tissue growth seen in some multiphasic designs. The methodology involved sequential steps: high-resolution CBCT and intraoral scans to capture defect geometry; precise defect mapping to define the Target Regeneration Volume; and AI Mesh mixer implementation to generate three distinct, seamlessly graded lattice zones. This AI-driven design ensures Optimal Biomechanics (Precision) by perfectly matching the scaffold's stiffness to native tissue, thereby eliminating stress-shielding.
Studieoversikt
Status
Intervensjon / Behandling
Detaljert beskrivelse
Background: The global prevalence of severe periodontitis increased by 91.54% between 1990 and 2021, driven primarily by population growth and population ageing, and now affects more than one billion people worldwide . Left untreated, periodontitis progressively destroys the attachment apparatus and is a leading cause of tooth loss. Conventional regenerative therapies rely largely on monophasic scaffolds, which impose a single, uniform biological and structural environment and therefore struggle to reproduce the layered, multi-tissue architecture of the periodontium. Study Problem: The periodontium is a composite of three histologically and mechanically distinct tissues - alveolar bone, the periodontal ligament (PDL), and cementum - each of which requires a different stiffness, porosity, and biochemical microenvironment for optimal regeneration. Monophasic scaffolds cannot satisfy this requirement simultaneously, which frequently results in fibrous encapsulation, incomplete integration, or stress-shielding. Objectives: This thesis examines the design, fabrication rationale, and clinical evaluation of an Artificial-Intelligence (AI)-boosted three-dimensional (3D) multiphasic scaffold intended to achieve simultaneous, tailored regeneration of alveolar bone, PDL, and cementum through a graded lattice architecture matched to native tissue stiffness. Methodology: The target regeneration volume was defined using high-resolution Cone-Beam Computed Tomography (CBCT) and intraoral optical scanning, processed through AI-assisted defect-segmentation software. A tri-zonal multiphasic scaffold - an outer bone-directed zone, a middle PDL-directed zone, and an inner cementum-directed zone - was generated and produced by 3D 2 Smart Scaffolds, Stronger Smiles bioprinting using biocompatible polymer and bio-ceramic bio-inks, then surgically placed in patients with severe infrabony defects. Clinical and radiographic outcomes were assessed at 2, 6, and 12 months post-operatively.
Studietype
Registrering (Antatt)
Fase
- Fase 1
Kontakter og plasseringer
Studiesteder
-
-
-
Giza, Egypt
- Giza
-
-
Deltakelseskriterier
Kvalifikasjonskriterier
Alder som er kvalifisert for studier
- Barn
- Voksen
- Eldre voksen
Tar imot friske frivillige
Kjønn som er kvalifisert for studier
Beskrivelse
Inclusion Criteria:
- Normal Lab investigation
Exclusion Criteria:
- Bone diseases , Bleeding disorders
Studieplan
Hvordan er studiet utformet?
Designdetaljer
- Primært formål: Behandling
- Tildeling: N/A
- Intervensjonsmodell: Enkeltgruppeoppdrag
- Masking: Ingen (Open Label)
Våpen og intervensjoner
Deltakergruppe / Arm |
Intervensjon / Behandling |
|---|---|
|
Eksperimentell: 1 patient
|
Patients underwent minimally invasive surgical intervention. Following preoperative diagnosis of severe infrabony defects exhibiting mobility and loss of periodontal support, a minimally invasive flap was elevated, and the defect was thoroughly debrided and prepared. The custom-printed multiphasic scaffold was seated into the defect with precision to ensure stability, and complete primary flap closure was achieved [ |
Hva måler studien?
Primære resultatmål
Resultatmål |
Tiltaksbeskrivelse |
Tidsramme |
|---|---|---|
|
Probing Depth
Tidsramme: 12 months
|
the measured distance from the edge of the gum (gingival margin) to the bottom of the gum pocket or sulcus. |
12 months
|
|
Bone quality , PDL formation
Tidsramme: 2,6,12 month
|
refers to the density and architectural composition of the jawbone, which determines its strength and ability to stabilize a dental implant |
2,6,12 month
|
Samarbeidspartnere og etterforskere
Publikasjoner og nyttige lenker
Generelle publikasjoner
- Lee CH, Hajibandeh J, Suzuki T, Fan A, Shang P, Mao JJ. Three-dimensional printed multiphase scaffolds for regeneration of periodontium complex. Tissue Eng Part A. 2014 Apr;20(7-8):1342-51. doi: 10.1089/ten.TEA.2013.0386. Epub 2014 Feb 6.
- Sowmya S, Mony U, Jayachandran P, Reshma S, Kumar RA, Arzate H, Nair SV, Jayakumar R. Tri-Layered Nanocomposite Hydrogel Scaffold for the Concurrent Regeneration of Cementum, Periodontal Ligament, and Alveolar Bone. Adv Healthc Mater. 2017 Apr;6(7). doi: 10.1002/adhm.201601251. Epub 2017 Jan 27.
Studierekorddatoer
Studer hoveddatoer
Studiestart (Faktiske)
Primær fullføring (Faktiske)
Studiet fullført (Antatt)
Datoer for studieregistrering
Først innsendt
Først innsendt som oppfylte QC-kriteriene
Først lagt ut (Faktiske)
Oppdateringer av studieposter
Sist oppdatering lagt ut (Faktiske)
Siste oppdatering sendt inn som oppfylte QC-kriteriene
Sist bekreftet
Mer informasjon
Begreper knyttet til denne studien
Andre studie-ID-numre
- FWA00025573
Plan for individuelle deltakerdata (IPD)
Planlegger du å dele individuelle deltakerdata (IPD)?
IPD-planbeskrivelse
Not decided yet
Legemiddel- og utstyrsinformasjon, studiedokumenter
Studerer et amerikansk FDA-regulert medikamentprodukt
Studerer et amerikansk FDA-regulert enhetsprodukt
produkt produsert i og eksportert fra USA
Denne informasjonen ble hentet direkte fra nettstedet clinicaltrials.gov uten noen endringer. Hvis du har noen forespørsler om å endre, fjerne eller oppdatere studiedetaljene dine, vennligst kontakt register@clinicaltrials.gov. Så snart en endring er implementert på clinicaltrials.gov, vil denne også bli oppdatert automatisk på nettstedet vårt. .