이 페이지는 자동 번역되었으며 번역의 정확성을 보장하지 않습니다. 참조하십시오 영문판 원본 텍스트의 경우.

Clinical Outcomes of 3D Printed and Milled Complete Dentures

2026년 9월 15일 업데이트: Dentsply Sirona Implants and Consumables

An Open, Single-center, Prospective, Randomized, Two-armed, Interventional, Post-market Clinical Investigation of 3D Printed Complete Dentures and Milled Complete Dentures During a 5-year Follow-up Period

This is a two-armed, single-center clinical study evaluating performance, efficacy and safety of three dimensional (3D) printed complete dentures and milled complete dentures during a 5-year follow-up period. The primary objective of this clinical investigation is to evaluate survival rate, i.e. subjects with survived dentures in both upper and lower jaw, of 3D printed complete dentures and milled complete dentures after 1 year (in each of the groups separately).

연구 개요

상태

모병

정황

개입 / 치료

연구 유형

중재적

등록 (추정된)

68

단계

  • 해당 없음

연락처 및 위치

이 섹션에서는 연구를 수행하는 사람들의 연락처 정보와 이 연구가 수행되는 장소에 대한 정보를 제공합니다.

연구 연락처

연구 연락처 백업

연구 장소

  • 미국
    • North Carolina
      • Chapel Hill, North Carolina, 미국, 27599
        • 모병
        • Adams School of Dentistry
        • 연락하다:

참여기준

연구원은 적격성 기준이라는 특정 설명에 맞는 사람을 찾습니다. 이러한 기준의 몇 가지 예는 개인의 일반적인 건강 상태 또는 이전 치료입니다.

자격 기준

공부할 수 있는 나이

  • 성인
  • 고령자

건강한 자원 봉사자를 받아들입니다

아니

설명

Inclusion Criteria:

  • Adult aged 18 years or above at time of informed consent.
  • Subject willing to participate in the clinical investigation and able to understand the content of the clinical investigation.
  • Subject willing to comply with investigational related procedures and to return for follow-up visits for a period of 5 years.
  • Subject has signed and dated the informed consent form.
  • Subjects in need of complete dentures in maxilla and mandible.
  • Prosthodontic Diagnostic Index (PDI) Completely edentulous classification (Class 1-3).
  • History of edentulism of at least 1 year.

Exclusion Criteria:

  • Known allergy or hypersensitivity to any of the components.
  • Subjects with significant systemic health issues or chronic conditions (American Society of Anesthesiologists (ASA) class 3-6 ).
  • Known pregnancy at time of enrolment.
  • Subjects unlikely to comply with investigational procedures, or unlikely to come back for follow-up visits, as judged by the Investigator.
  • Previous enrolment in the present clinical investigation.
  • Involvement in the planning and conduct of the clinical investigation (applies to both Dentsply Sirona personnel and the clinical investigation site).

  • PDI Completely edentulous classification (Class 4)

    • Presence of severely atrophied ridge.
    • Presence of severe ridge undercuts.
    • Clinically severe Xerostomia.
    • Absence of hard or soft tissue pathology that precludes denture therapy.
    • Maxillofacial defects.
  • Uncontrolled pathological process in the oral cavity, as judged by the Investigator.
  • Participation in another clinical investigation that may interfere with the present clinical investigation.

공부 계획

이 섹션에서는 연구 설계 방법과 연구가 측정하는 내용을 포함하여 연구 계획에 대한 세부 정보를 제공합니다.

연구는 어떻게 설계됩니까?

디자인 세부사항

  • 주 목적: 지지 요법
  • 할당: 무작위
  • 중재 모델: 병렬 할당
  • 마스킹: 없음(오픈 라벨)

무기와 개입

참가자 그룹 / 팔
개입 / 치료
실험적: 3D printed dentures
3D printed denture bases and 3D printed denture teeth.
장치: Lucitone Digital Print

Consisting of the following parts:

  • Lucitone Digital Print 3D Denture Base.
  • Lucitone Digital Interpenetrating Polymer Network (IPN) 3D Premium Tooth.
  • Lucitone Digital Print Denture System Accessories
실험적: Milled dentures
Milled denture bases and denture teeth.
장치: Lucitone Digital Fit

Consisting of the following parts:

  • Lucitone Digital Fit Denture Discs.
  • Dentsply Sirona Multilayer Polymethyl Methacrylate (PMMA) Discs.

연구는 무엇을 측정합니까?

주요 결과 측정

결과 측정
측정값 설명
기간
Denture survival rate
기간: One year after baseline (baseline = final denture insertion performed within 6-months from day 1)
Restorations still in function after 1 year.
One year after baseline (baseline = final denture insertion performed within 6-months from day 1)

2차 결과 측정

결과 측정
측정값 설명
기간
Denture survival rate
기간: 3 and 6 months, and 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Restorations still in function after 3 and 6 months, and 2, 3, 4 and 5 years.
3 and 6 months, and 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Denture success
기간: 3 and 6 months, and 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)

A denture will be considered successful if all the following criteria are fulfilled:

Absence of major technical complications.

Absence of major biological complications.

Functional occlusion and mastication, assessed by clinical examination and OHIP-EDENT.

  • Assessed by OHIP-EDENT - Q1 from OHIP: "Have you had difficulty chewing any foods because of problems with your teeth, mouth or dentures?", where score 0-2 would be considered successful (0=never, 1=hardly ever, 2 = occasionally).

Absence of patient reported discomfort, assessed by OHIP-EDENT.

  • Assessed by all questions in Physical pain section of OHIP-EDENT - Q4 "Have you had painful aching in your mouth?", Q5 "Have you found it uncomfortable to eat any foods because of problems with your teeth, mouth or dentures?", Q6 "Have you had sore spots in your mouth?, Q7 "Have you had uncomfortable dentures?", where score 0-1 would be considered successful (0=never and 1=hardly ever).
3 and 6 months, and 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Denture adaptation accuracy
기간: At baseline (baseline = final denture insertion performed within 6-months from day 1)
Evaluation of accuracy of 3D printing and milling technology will be made using Geomagic Software at time of final denture insertion. The denture intaglio at insertion will be compared with the final impression as reference scan.
At baseline (baseline = final denture insertion performed within 6-months from day 1)
Denture retention force
기간: 3 and 6 months, and 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Retention force of the dentures will be evaluated by applying a dynamometer gauge at the following locations: Post dam, Tuberosities and retromolar pads.
3 and 6 months, and 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Technical Complications
기간: At baseline, 3 and 6 months, and 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)

Complications will be recorded and assessed as either:

  • Major complications (requiring laboratory intervention to correct - fracture, lab reline, etc.).
  • Minor complications (requiring chairside adjustment - sore spots, occlusal discrepancies, etc.).
At baseline, 3 and 6 months, and 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Biological Complications
기간: At baseline, 3 and 6 months, and 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Occurrence of biological complications. Biological complications will be evaluated by recording major and minor biological complications. The evaluation of biological complications will be derived from the adverse event (AE)/adverse device effect (ADE) sections of the Case Report Form.
At baseline, 3 and 6 months, and 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
OHIP-EDENT Questionnaire.
기간: 3 and 6 months, and 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Quality of Life through Oral Health Impact Profile for Edentulous Patients (OHIP-EDENT) Questionnaire completed by participating subjects. OHIP-EDENT contains 19 questions, divided into six domains: Functional limitations, Physical pain, Psychological discomfort, Physical disability, Psychological disability and Handicap. Response categories for all questions: 4 = very often; 3 = fairly often; 2 = occasionally; 1 = hardly ever; 0=never, i.e. lower scores corresponds with higher quality of life.
3 and 6 months, and 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Denture quality assessed via volumetric loss
기간: At baseline and 3 and 6 months, 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Serial comparison of follow-up denture scans using TRIOS Compare with post insertion adjusted denture scan as reference. Volumetric loss measured in mm3.
At baseline and 3 and 6 months, 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Denture quality assessed via maximum vertical loss.
기간: At baseline and 3 and 6 months, 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Serial comparison of follow-up denture scans using TRIOS Compare with post insertion adjusted denture scan as reference. Maximum vertical loss measured in μm.
At baseline and 3 and 6 months, 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Denture quality assessed by discolouration (delta E) at a central incisor (#8).
기간: At baseline and 3 and 6 months, 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Discolouration (intrinsic or interfacial) measured with spectrophotometer. The colour at a central incisor (#8) and the denture just above #8 will be measured.
At baseline and 3 and 6 months, 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Denture quality assessed by occlusion (bite position).
기간: At baseline and 3 and 6 months, 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Number of occlusal contacts using articulating paper will be documented.
At baseline and 3 and 6 months, 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)
Denture aesthetics - Appropriateness of tooth shape.
기간: At baseline (baseline = final denture insertion performed within 6-months from day 1)

Appropriateness of tooth shape assessed by the following Yes/No question:

Appropriate Tooth Shape to match facial aesthetics?
At baseline (baseline = final denture insertion performed within 6-months from day 1)
Denture aesthetics - Appropriateness of tooth size.
기간: At baseline (baseline = final denture insertion performed within 6-months from day 1)

Appropriateness of tooth size assessed by the following Yes/No question:

Appropriate Tooth Size to match facial aesthetics?
At baseline (baseline = final denture insertion performed within 6-months from day 1)
Denture aesthetics - Appropriateness of tooth arrangement
기간: At baseline (baseline = final denture insertion performed within 6-months from day 1)

Appropriateness of tooth arrangements assessed by the following Yes/No questions:

  • Overall tooth position, angulation and alignment that appears natural and pleasing?
  • Posterior tooth alignment to maintain adequate buccal corridors?
  • Dental midline aligned in relation to facial midline?
  • Appropriate orientation of occlusal plane in relation to patient's smile line and facial reference lines?
  • Sufficient horizontal overlap?
At baseline (baseline = final denture insertion performed within 6-months from day 1)
Denture aesthetics - Appropriateness of tooth colour / colour match
기간: At baseline (baseline = final denture insertion performed within 6-months from day 1)

Appropriateness of tooth colour /colour match assessed by the following Yes/No questions:

  • Appropriate Tooth Shade to suit the naturalness of the patient's skin tone?
  • Appropriate Gingival Shade, translucency and colour characterisation to suit the naturalness of the patient's original gingiva?
At baseline (baseline = final denture insertion performed within 6-months from day 1)
Denture aesthetics - Appropriateness of Denture base
기간: At baseline (baseline = final denture insertion performed within 6-months from day 1)

Appropriateness of denture base assessed by the following Yes/No questions:

  • Appropriate tooth to gingival display?
  • Appropriate physical characterisation (contours) of denture base that appears natural and pleasing?
At baseline (baseline = final denture insertion performed within 6-months from day 1)
Denture aesthetics - Lip support
기간: At baseline (baseline = final denture insertion performed within 6-months from day 1)

Lip support assessed by the following Yes/No questions:

  • Anterior tooth alignment to provide adequate lip support when viewed from the facial profile?
  • Appropriate arch form to allow for natural facial expressions and phonetics?
  • Thickness of denture flange for adequate lip support and facial expressions?
At baseline (baseline = final denture insertion performed within 6-months from day 1)
Occurrence of Adverse Events, Adverse Device Effects, and Device Deficiencies during the clinical investigation.
기간: From Day 0 up to completion of the 5-year follow-up visit, on average 5 years and 3 months.
Adverse Events, Adverse Device Effects, and Device Deficiencies spontaneously reported, and collection at each clinical investigation visit.
From Day 0 up to completion of the 5-year follow-up visit, on average 5 years and 3 months.
Patient Satisfaction
기간: 3 and 6 months, and 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)

Patient satisfaction including aesthetics as evaluated by patient questionnaire including the following questions:

  1. Are you overall satisfied with your dentures?
  2. Are your satisfied with the comfort of your dentures?
  3. Are you satisfied with the aesthetics of your dentures?
  4. Are you satisfied with your ability to speak when wearing your dentures?
  5. Are you satisfied with the fit of your dentures?

Patient satisfaction with dentures will be evaluated using a likert scale, ranging from 0 to 10 for each of above questions. The likert scale representing a spectrum of feelings between extremes with 0= Very unsatisfied and 10= Very satisfied. Patients will rate their assessment by marking a number corresponding to their feelings at the time. A low score represents a high degree of dissatisfaction, and a high score a high degree of satisfaction
3 and 6 months, and 1, 2, 3, 4 and 5 years after baseline (baseline = final denture insertion performed within 6-months from day 1)

공동 작업자 및 조사자

여기에서 이 연구와 관련된 사람과 조직을 찾을 수 있습니다.

스폰서

Dentsply Sirona Implants and Consumables

연구 기록 날짜

이 날짜는 ClinicalTrials.gov에 대한 연구 기록 및 요약 결과 제출의 진행 상황을 추적합니다. 연구 기록 및 보고된 결과는 공개 웹사이트에 게시되기 전에 특정 품질 관리 기준을 충족하는지 확인하기 위해 국립 의학 도서관(NLM)에서 검토합니다.

연구 주요 날짜

연구 시작 (실제)

2026년 9월 11일

기본 완료 (추정된)

2028년 10월 30일

연구 완료 (추정된)

2032년 10월 30일

연구 등록 날짜

최초 제출

2026년 3월 30일

QC 기준을 충족하는 최초 제출

2026년 5월 7일

처음 게시됨 (실제)

2026년 5월 14일

연구 기록 업데이트

마지막 업데이트 게시됨 (실제)

2026년 9월 17일

QC 기준을 충족하는 마지막 업데이트 제출

2026년 9월 15일

마지막으로 확인됨

2026년 9월 1일

추가 정보

이 연구와 관련된 용어

추가 관련 MeSH 약관

기타 연구 ID 번호

  • C-LA-24-020

개별 참가자 데이터(IPD) 계획

개별 참가자 데이터(IPD)를 공유할 계획입니까?

아니요

약물 및 장치 정보, 연구 문서

미국 FDA 규제 의약품 연구

아니

미국 FDA 규제 기기 제품 연구

예

미국에서 제조되어 미국에서 수출되는 제품

아니

이 정보는 변경 없이 clinicaltrials.gov 웹사이트에서 직접 가져온 것입니다. 귀하의 연구 세부 정보를 변경, 제거 또는 업데이트하도록 요청하는 경우 register@clinicaltrials.gov. 문의하십시오. 변경 사항이 clinicaltrials.gov에 구현되는 즉시 저희 웹사이트에도 자동으로 업데이트됩니다. .

구독하다