A Bite Force Study Comparing Two New Test Adhesives With Currently Marketed Denture Adhesive
2018年4月25日 更新者:GlaxoSmithKline
A Proof of Principle Bite Force Study Using Two New Test Adhesives and a Currently Marketed Denture Adhesive.
The objective of this 4-treatment, 4-period, randomized, crossover, proof of principle bite force study will be to compare bite force measurements over a 12 hour period across two (test) cream denture adhesives, with a currently marketed cream denture adhesive (positive control), and a negative/no treatment control.
調査の概要
状態
完了
条件
詳細な説明
This will be a 4-treatment, 4-period, randomized, crossover, proof of principle bite force study which will compare bite force measurements over a 12 hour period across two cream denture adhesives with a currently marketed cream denture adhesive (positive control), and a negative/no treatment control.
A short questionnaire regarding the flavor and texture characteristics of each denture adhesive after a single use will also be administered to give an indication of participant satisfaction of these attributes.
研究の種類
介入
入学 (実際)
25
段階
- 適用できない
連絡先と場所
このセクションには、調査を実施する担当者の連絡先の詳細と、この調査が実施されている場所に関する情報が記載されています。
研究場所
-
-
New Jersey
-
Bloomfield、New Jersey、アメリカ、07003
- GSK Investigational Site
-
-
参加基準
研究者は、適格基準と呼ばれる特定の説明に適合する人を探します。これらの基準のいくつかの例は、人の一般的な健康状態または以前の治療です。
適格基準
就学可能な年齢
18年~85年 (大人、高齢者)
健康ボランティアの受け入れ
はい
受講資格のある性別
全て
説明
Inclusion Criteria:
- Demonstrates understanding of the study procedures, restrictions and willingness to participate as evidenced by voluntary written informed consent and has received a signed and dated copy of the informed consent form.
- Aged between 18 to 85 years.
- Good general and mental health with, in the opinion of the investigator or medically qualified designee: No clinically significant and relevant abnormalities in medical history or upon oral examination and absence of any condition that could affect the participant's safety or wellbeing or their ability to understand and follow study procedures and requirements.
- Completely edentulous maxillary arch restored with a conventional full acrylic based upper complete denture. Dentate, partial or full edentulous mandibular arch. Partial or full edentulous arch may be restored with a stable complete, partial or implant supported denture. Maxillary dentures must be considered to be moderately well-fitting at the screening visit (Kapur Index, Olshan Modification: retention score >=2, stability score >=2). Maxillary dentures and mandibular dentures, if present, must be considered to be well-made based on design and construction criteria specified in the protocol. The qualifying maxillary incisal bite force readings (without adhesive) must be less than or equal to 9 pounds (lb) at the Screening Visit and subsequent visit pre-treatment baseline bites. At least 2 of the 4 qualifying bite readings at the Screening Visit must be reproducible (+/- 2lb). At subsequent visits the bite force readings must be within +/-2lb for 1 of the 3 practice bites and the pre-treatment baseline bite.
- Understands and is willing, able and likely to comply with all study procedures and restrictions.
Exclusion Criteria:
- A woman who is known to be pregnant or who is intending to become pregnant (self reported) over the duration of the study.
- A woman who is breast-feeding.
- Implanted with a cardiac pacemaker.
- Daily doses of medication that might interfere with the ability to perform the study according to protocol (as determined by the Investigator).
- Taking or have taken a bisphosphonate drug for treatment of osteoporosis.
- A serious chronic disease requiring hospitalization.
- Any condition not previously mentioned that in the Investigator's opinion may impair the study evaluation.
- Known or suspected intolerance or hypersensitivity to the study materials (or closely related compounds) or any of their stated ingredients.
- Any clinically significant or relevant oral abnormality (e.g. temporomandibular joint [TMJ] problems) that, in the opinion of the investigator, could affect the participant's participation in the study.
- Any participant clinically identified as having an incisal bite relation which could affect the bite force measurements.
- Severe dry mouth that may affect denture retention in the opinion of the Investigator.
- OST examination findings such as stomatitis, open sores, lesions, redness or swelling that, in the opinion of the investigator, could affect the participant's participation in the study.
- Participation in another clinical study (including cosmetic studies) or receipt of an investigational drug within 30 days of the screening visit.
- Previous participation in this study.
- Recent history (within the last year) of alcohol or other substance abuse.
- A participant who is unwilling to refrain from smoking, including e-cigarettes and the use of chewing tobacco or other tobacco products for the duration of screening and each treatment day (12-14 hours).
- An employee of the sponsor or the study site or members of their immediate family.
研究計画
このセクションでは、研究がどのように設計され、研究が何を測定しているかなど、研究計画の詳細を提供します。
研究はどのように設計されていますか?
デザインの詳細
- 主な目的:支持療法
- 割り当て:ランダム化
- 介入モデル:クロスオーバー割り当て
- マスキング:独身
武器と介入
参加者グループ / アーム |
介入・治療 |
|---|---|
|
実験的:Test Product 1
Applied topically to upper denture, to clean dry denture fit surface in a pattern consistent with application instructions.
|
Test adhesive 1 with a thin nozzle
|
|
実験的:Test Product 2
Applied topically to upper denture, to clean dry denture fit surface in a pattern consistent with application instructions.
|
Test adhesive 2 with a thin nozzle
|
|
アクティブコンパレータ:Reference Product
Applied topically to upper denture, to clean dry denture fit surface in a pattern consistent with application instructions.
|
Adhesive Cream
|
|
他の:Negative Control
|
No adhesive
|
この研究は何を測定していますか?
主要な結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
Area Over Baseline Over 12 Hours (AOB0-12) for Test Adhesive 1 Versus (vs.) No Adhesive
時間枠:up to 12 hours
|
Area over baseline over 12 hours (AOB0-12) was assessed to measure the incisal bite force.
AOB0-12 was calculated as area under the curve over 12 hours [AUC0-12])/12 hours minus baseline bite force (pounds [lbs]).
AUC0-12 was calculated using the trapezoidal method.
This transformation returned the measurement to the same scale as the original observations.
Higher values of AOB0-12 demonstrate a stronger bite force overtime than lower values.
|
up to 12 hours
|
|
Area Over Baseline Over 12 Hours (AOB0-12) for Test Adhesive 2 vs. No Adhesive
時間枠:up to 12 hours
|
Area over baseline over 12 hours (AOB0-12) was assessed to measure the incisal bite force.
AOB0-12 was calculated as area under the curve over 12 hours [AUC0-12])/12 hours minus baseline bite force (lbs).
AUC0-12 was calculated using the trapezoidal method.
This transformation returned the measurement to the same scale as the original observations.
Higher values of AOB0-12 demonstrate a stronger bite force overtime than lower values.
|
up to 12 hours
|
二次結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
Area Over Baseline Over 12 Hours (AOB0-12) for Test Adhesive 1 vs. Positive Control Adhesive
時間枠:up to 12 hours
|
Area over baseline over 12 hours (AOB0-12) was assessed to measure the incisal bite force.
AOB0-12 was calculated as area under the curve over 12 hours [AUC0-12])/12 hours minus baseline bite force (lbs).
AUC0-12 was calculated using the trapezoidal method.
This transformation returned the measurement to the same scale as the original observations.
Higher values of AOB0-12 demonstrate a stronger bite force overtime than lower values.
|
up to 12 hours
|
|
Area Over Baseline Over 12 Hours (AOB0-12) for Test Adhesive 2 vs. Positive Control Adhesive
時間枠:up to 12 hours
|
Area over baseline over 12 hours (AOB0-12) was assessed to measure the incisal bite force.
AOB0-12 was calculated as area under the curve over 12 hours [AUC0-12])/12 hours minus baseline bite force (lbs).
AUC0-12 was calculated using the trapezoidal method.
This transformation returned the measurement to the same scale as the original observations.
Higher values of AOB0-12 demonstrate a stronger bite force overtime than lower values.
|
up to 12 hours
|
|
Area Over Baseline Over 12 Hours (AOB0-12) for Test Adhesive 1 vs. Test Adhesive 2
時間枠:up to 12 hours
|
Area over baseline over 12 hours (AOB0-12) was assessed to measure the incisal bite force.
AOB0-12 was calculated as area under the curve over 12 hours [AUC0-12])/12 hours minus baseline bite force (lbs).
AUC0-12 was calculated using the trapezoidal method.
This transformation returned the measurement to the same scale as the original observations.
Higher values of AOB0-12 demonstrate a stronger bite force overtime than lower values.
|
up to 12 hours
|
協力者と研究者
ここでは、この調査に関係する人々や組織を見つけることができます。
スポンサー
出版物と役立つリンク
研究に関する情報を入力する責任者は、自発的にこれらの出版物を提供します。これらは、研究に関連するあらゆるものに関するものである可能性があります。
研究記録日
これらの日付は、ClinicalTrials.gov への研究記録と要約結果の提出の進捗状況を追跡します。研究記録と報告された結果は、国立医学図書館 (NLM) によって審査され、公開 Web サイトに掲載される前に、特定の品質管理基準を満たしていることが確認されます。
主要日程の研究
研究開始 (実際)
2017年3月7日
一次修了 (実際)
2017年4月5日
研究の完了 (実際)
2017年4月5日
試験登録日
最初に提出
2016年10月17日
QC基準を満たした最初の提出物
2016年10月17日
最初の投稿 (見積もり)
2016年10月19日
学習記録の更新
投稿された最後の更新 (実際)
2018年5月23日
QC基準を満たした最後の更新が送信されました
2018年4月25日
最終確認日
2018年2月1日
詳しくは
本研究に関する用語
その他の研究ID番号
- 206233
医薬品およびデバイス情報、研究文書
米国FDA規制医薬品の研究
いいえ
米国FDA規制機器製品の研究
はい
米国で製造され、米国から輸出された製品。
いいえ
この情報は、Web サイト clinicaltrials.gov から変更なしで直接取得したものです。研究の詳細を変更、削除、または更新するリクエストがある場合は、register@clinicaltrials.gov。 までご連絡ください。 clinicaltrials.gov に変更が加えられるとすぐに、ウェブサイトでも自動的に更新されます。