이 페이지는 자동 번역되었으며 번역의 정확성을 보장하지 않습니다. 참조하십시오 영문판 원본 텍스트의 경우.

A Bite Force Study Comparing Two New Test Adhesives With Currently Marketed Denture Adhesive

2018년 4월 25일 업데이트: GlaxoSmithKline

A Proof of Principle Bite Force Study Using Two New Test Adhesives and a Currently Marketed Denture Adhesive.

The objective of this 4-treatment, 4-period, randomized, crossover, proof of principle bite force study will be to compare bite force measurements over a 12 hour period across two (test) cream denture adhesives, with a currently marketed cream denture adhesive (positive control), and a negative/no treatment control.

연구 개요

상세 설명

This will be a 4-treatment, 4-period, randomized, crossover, proof of principle bite force study which will compare bite force measurements over a 12 hour period across two cream denture adhesives with a currently marketed cream denture adhesive (positive control), and a negative/no treatment control. A short questionnaire regarding the flavor and texture characteristics of each denture adhesive after a single use will also be administered to give an indication of participant satisfaction of these attributes.

연구 유형

중재적

등록 (실제)

25

단계

  • 해당 없음

연락처 및 위치

이 섹션에서는 연구를 수행하는 사람들의 연락처 정보와 이 연구가 수행되는 장소에 대한 정보를 제공합니다.

연구 장소

    • New Jersey
      • Bloomfield, New Jersey, 미국, 07003
        • GSK Investigational Site

참여기준

연구원은 적격성 기준이라는 특정 설명에 맞는 사람을 찾습니다. 이러한 기준의 몇 가지 예는 개인의 일반적인 건강 상태 또는 이전 치료입니다.

자격 기준

공부할 수 있는 나이

18년 (성인, 고령자)

건강한 자원 봉사자를 받아들입니다

연구 대상 성별

모두

설명

Inclusion Criteria:

  • Demonstrates understanding of the study procedures, restrictions and willingness to participate as evidenced by voluntary written informed consent and has received a signed and dated copy of the informed consent form.
  • Aged between 18 to 85 years.
  • Good general and mental health with, in the opinion of the investigator or medically qualified designee: No clinically significant and relevant abnormalities in medical history or upon oral examination and absence of any condition that could affect the participant's safety or wellbeing or their ability to understand and follow study procedures and requirements.
  • Completely edentulous maxillary arch restored with a conventional full acrylic based upper complete denture. Dentate, partial or full edentulous mandibular arch. Partial or full edentulous arch may be restored with a stable complete, partial or implant supported denture. Maxillary dentures must be considered to be moderately well-fitting at the screening visit (Kapur Index, Olshan Modification: retention score >=2, stability score >=2). Maxillary dentures and mandibular dentures, if present, must be considered to be well-made based on design and construction criteria specified in the protocol. The qualifying maxillary incisal bite force readings (without adhesive) must be less than or equal to 9 pounds (lb) at the Screening Visit and subsequent visit pre-treatment baseline bites. At least 2 of the 4 qualifying bite readings at the Screening Visit must be reproducible (+/- 2lb). At subsequent visits the bite force readings must be within +/-2lb for 1 of the 3 practice bites and the pre-treatment baseline bite.
  • Understands and is willing, able and likely to comply with all study procedures and restrictions.

Exclusion Criteria:

  • A woman who is known to be pregnant or who is intending to become pregnant (self reported) over the duration of the study.
  • A woman who is breast-feeding.
  • Implanted with a cardiac pacemaker.
  • Daily doses of medication that might interfere with the ability to perform the study according to protocol (as determined by the Investigator).
  • Taking or have taken a bisphosphonate drug for treatment of osteoporosis.
  • A serious chronic disease requiring hospitalization.
  • Any condition not previously mentioned that in the Investigator's opinion may impair the study evaluation.
  • Known or suspected intolerance or hypersensitivity to the study materials (or closely related compounds) or any of their stated ingredients.
  • Any clinically significant or relevant oral abnormality (e.g. temporomandibular joint [TMJ] problems) that, in the opinion of the investigator, could affect the participant's participation in the study.
  • Any participant clinically identified as having an incisal bite relation which could affect the bite force measurements.
  • Severe dry mouth that may affect denture retention in the opinion of the Investigator.
  • OST examination findings such as stomatitis, open sores, lesions, redness or swelling that, in the opinion of the investigator, could affect the participant's participation in the study.
  • Participation in another clinical study (including cosmetic studies) or receipt of an investigational drug within 30 days of the screening visit.
  • Previous participation in this study.
  • Recent history (within the last year) of alcohol or other substance abuse.
  • A participant who is unwilling to refrain from smoking, including e-cigarettes and the use of chewing tobacco or other tobacco products for the duration of screening and each treatment day (12-14 hours).
  • An employee of the sponsor or the study site or members of their immediate family.

공부 계획

이 섹션에서는 연구 설계 방법과 연구가 측정하는 내용을 포함하여 연구 계획에 대한 세부 정보를 제공합니다.

연구는 어떻게 설계됩니까?

디자인 세부사항

  • 주 목적: 지지 요법
  • 할당: 무작위
  • 중재 모델: 크로스오버 할당
  • 마스킹: 하나의

무기와 개입

참가자 그룹 / 팔
개입 / 치료
실험적: Test Product 1
Applied topically to upper denture, to clean dry denture fit surface in a pattern consistent with application instructions.
Test adhesive 1 with a thin nozzle
실험적: Test Product 2
Applied topically to upper denture, to clean dry denture fit surface in a pattern consistent with application instructions.
Test adhesive 2 with a thin nozzle
활성 비교기: Reference Product
Applied topically to upper denture, to clean dry denture fit surface in a pattern consistent with application instructions.
Adhesive Cream
다른: Negative Control
No adhesive

연구는 무엇을 측정합니까?

주요 결과 측정

결과 측정
측정값 설명
기간
Area Over Baseline Over 12 Hours (AOB0-12) for Test Adhesive 1 Versus (vs.) No Adhesive
기간: up to 12 hours
Area over baseline over 12 hours (AOB0-12) was assessed to measure the incisal bite force. AOB0-12 was calculated as area under the curve over 12 hours [AUC0-12])/12 hours minus baseline bite force (pounds [lbs]). AUC0-12 was calculated using the trapezoidal method. This transformation returned the measurement to the same scale as the original observations. Higher values of AOB0-12 demonstrate a stronger bite force overtime than lower values.
up to 12 hours
Area Over Baseline Over 12 Hours (AOB0-12) for Test Adhesive 2 vs. No Adhesive
기간: up to 12 hours
Area over baseline over 12 hours (AOB0-12) was assessed to measure the incisal bite force. AOB0-12 was calculated as area under the curve over 12 hours [AUC0-12])/12 hours minus baseline bite force (lbs). AUC0-12 was calculated using the trapezoidal method. This transformation returned the measurement to the same scale as the original observations. Higher values of AOB0-12 demonstrate a stronger bite force overtime than lower values.
up to 12 hours

2차 결과 측정

결과 측정
측정값 설명
기간
Area Over Baseline Over 12 Hours (AOB0-12) for Test Adhesive 1 vs. Positive Control Adhesive
기간: up to 12 hours
Area over baseline over 12 hours (AOB0-12) was assessed to measure the incisal bite force. AOB0-12 was calculated as area under the curve over 12 hours [AUC0-12])/12 hours minus baseline bite force (lbs). AUC0-12 was calculated using the trapezoidal method. This transformation returned the measurement to the same scale as the original observations. Higher values of AOB0-12 demonstrate a stronger bite force overtime than lower values.
up to 12 hours
Area Over Baseline Over 12 Hours (AOB0-12) for Test Adhesive 2 vs. Positive Control Adhesive
기간: up to 12 hours
Area over baseline over 12 hours (AOB0-12) was assessed to measure the incisal bite force. AOB0-12 was calculated as area under the curve over 12 hours [AUC0-12])/12 hours minus baseline bite force (lbs). AUC0-12 was calculated using the trapezoidal method. This transformation returned the measurement to the same scale as the original observations. Higher values of AOB0-12 demonstrate a stronger bite force overtime than lower values.
up to 12 hours
Area Over Baseline Over 12 Hours (AOB0-12) for Test Adhesive 1 vs. Test Adhesive 2
기간: up to 12 hours
Area over baseline over 12 hours (AOB0-12) was assessed to measure the incisal bite force. AOB0-12 was calculated as area under the curve over 12 hours [AUC0-12])/12 hours minus baseline bite force (lbs). AUC0-12 was calculated using the trapezoidal method. This transformation returned the measurement to the same scale as the original observations. Higher values of AOB0-12 demonstrate a stronger bite force overtime than lower values.
up to 12 hours

공동 작업자 및 조사자

여기에서 이 연구와 관련된 사람과 조직을 찾을 수 있습니다.

스폰서

간행물 및 유용한 링크

연구에 대한 정보 입력을 담당하는 사람이 자발적으로 이러한 간행물을 제공합니다. 이것은 연구와 관련된 모든 것에 관한 것일 수 있습니다.

연구 기록 날짜

이 날짜는 ClinicalTrials.gov에 대한 연구 기록 및 요약 결과 제출의 진행 상황을 추적합니다. 연구 기록 및 보고된 결과는 공개 웹사이트에 게시되기 전에 특정 품질 관리 기준을 충족하는지 확인하기 위해 국립 의학 도서관(NLM)에서 검토합니다.

연구 주요 날짜

연구 시작 (실제)

2017년 3월 7일

기본 완료 (실제)

2017년 4월 5일

연구 완료 (실제)

2017년 4월 5일

연구 등록 날짜

최초 제출

2016년 10월 17일

QC 기준을 충족하는 최초 제출

2016년 10월 17일

처음 게시됨 (추정)

2016년 10월 19일

연구 기록 업데이트

마지막 업데이트 게시됨 (실제)

2018년 5월 23일

QC 기준을 충족하는 마지막 업데이트 제출

2018년 4월 25일

마지막으로 확인됨

2018년 2월 1일

추가 정보

이 연구와 관련된 용어

기타 연구 ID 번호

  • 206233

약물 및 장치 정보, 연구 문서

미국 FDA 규제 의약품 연구

아니

미국 FDA 규제 기기 제품 연구

미국에서 제조되어 미국에서 수출되는 제품

아니

이 정보는 변경 없이 clinicaltrials.gov 웹사이트에서 직접 가져온 것입니다. 귀하의 연구 세부 정보를 변경, 제거 또는 업데이트하도록 요청하는 경우 register@clinicaltrials.gov. 문의하십시오. 변경 사항이 clinicaltrials.gov에 구현되는 즉시 저희 웹사이트에도 자동으로 업데이트됩니다. .

Test Product 1에 대한 임상 시험

3
구독하다