이 페이지는 자동 번역되었으며 번역의 정확성을 보장하지 않습니다. 참조하십시오 영문판 원본 텍스트의 경우.

Survival, Success, Stability, and Patient Comfort of TADs Placed by Steady Oblique-Angled Versus Two-Step Angulation Insertion Techniques

2026년 7월 14일 업데이트: University of Malaya

Survival, Success, Stability, and Patient Comfort of Temporary Anchorage Devices Placed by Steady Oblique-Angled Versus Two-Step Angulation Insertion Techniques: A Split-Mouth Randomised Clinical Trial

The goal of this clinical trial is to learn if two-step angulation Temporary Anchorage Devices (TADs) insertion technique better for survival, stability and patient-reported outcomes. It will also learn about how the trabecular bone volume fraction measured from pre-treatment CBCT imaging influences the stability, survival, and overall clinical success of TADs. The clinical trial will be carried out among fit and healthy adults aged 18 years old above who require extraction of all four permanent first premolars, planned for maximum anchorage using bilateral maxillary and mandibular TADs.

The main questions it aims to answer are:

In orthodontic patients,

  • does the two-step angulation insertion technique for TADs provide superior survival, stability, and patient-reported outcomes, with acceptable complication rates?
  • how are these outcomes influenced by maxillary and mandibular trabecular bone volume fraction measured on CBCT?

Researchers will compare two-step angulation insertion technique to steady oblique-angled TADs insertion technique to see it provide more superior survival, stability, and patient-reported outcomes, with acceptable complication rates.

Participants will:

  • be taken CBCT radiography before TADs insertion
  • receive both TADs insertion technique either right or left on both maxilla and mandible between second premolars and first molars
  • fill up patient reported outcome questionnaire At immediate post-insertion (T0), post alignment (T1), and subsequently at monthly intervals during en-masse retraction: 1 month (T2), 2 months (T3), 3 months (T4), 4 months (T5), 5 months (T6), 6 months (T7)
  • visit the clinic for measurement of TADs stability, clinical assessment of inflammation, mobility and the need for replacement at immediate post-insertion (T0), post alignment (T1), and subsequently at monthly intervals during en-masse retraction: 1 month (T2), 2 months (T3), 3 months (T4), 4 months (T5), 5 months (T6), 6 months (T7)

연구 개요

상태

아직 모집하지 않음

정황

개입 / 치료

연구 유형

중재적

등록 (추정된)

28

단계

  • 해당 없음

연락처 및 위치

이 섹션에서는 연구를 수행하는 사람들의 연락처 정보와 이 연구가 수행되는 장소에 대한 정보를 제공합니다.

연구 연락처

연구 장소

  • 말레이시아
    • Kuala Lumpur
      • Kuala Lumpur, Kuala Lumpur, 말레이시아, 50603
        • Faculty of Dentistry, Universiti Malaya
        • 연락하다:
        • 수석 연구원:
          • Saritha Sivarajan
        • 부수사관:
          • Siti Adibah Othman
        • 부수사관:
          • Maziahtul Zawani Munshi
        • 수석 연구원:
          • Wan Ying Lee

참여기준

연구원은 적격성 기준이라는 특정 설명에 맞는 사람을 찾습니다. 이러한 기준의 몇 가지 예는 개인의 일반적인 건강 상태 또는 이전 치료입니다.

자격 기준

공부할 수 있는 나이

  • 성인
  • 고령자

건강한 자원 봉사자를 받아들입니다

아니

설명

Inclusion Criteria:

  • Age range: 18 years old and above
  • Bimaxillary proclination with maximum anchorage control with TAD in maxilla and mandible
  • Extraction of all four permanent first premolar as part of orthodontic treatment
  • Crowding in the upper and lower incisors (< 5.0mm)
  • Overjet less than 6mm
  • BPE score 0, 1 or 2
  • Average vertical facial proportions

Exclusion Criteria:

  • Systemic diseases such as diabetes, osteoporosis
  • On long term use of antibiotics, phenytoin, cyclosporin, anti-inflammatory drugs, systemic corticosteroid and calcium channel blockers that would affect the bone biology
  • Cigarette smoking, vaping, history of smoking
  • Impacted / missing teeth at the treatment site
  • BPE score 3 and 4
  • Vertical skeletal discrepancies e.g. high angle and low angle.
  • Orthognathic treatment need
  • Craniofacial disorder, cleft lip and palate, syndromes
  • Low maxillary sinus level with alveolar crest height of less than 4mm
  • Titanium allergy
  • Pregnant woman

공부 계획

이 섹션에서는 연구 설계 방법과 연구가 측정하는 내용을 포함하여 연구 계획에 대한 세부 정보를 제공합니다.

연구는 어떻게 설계됩니까?

디자인 세부사항

  • 주 목적: 치료
  • 할당: 무작위
  • 중재 모델: 병렬 할당
  • 마스킹: 하나의

무기와 개입

참가자 그룹 / 팔
개입 / 치료
실험적: Two-step Angulation with Partial Unwinding Technique
This is a split-mouth randomized clinical trial design where each participant serves as their own internal control. This arm represents the specific jaw quadrants randomized to receive Temporary Anchorage Device (TAD) insertion using a two-step angulation with a partial unwinding technique. The TAD is first placed parallel to the occlusal plane to create a cortical bone indentation (guided by a rubber depth stopper based on CBCT bone thickness), partially backed out (derotated) by half a turn, and subsequently reangulated to a final seating angle of 30-45 degree relative to the occlusal plane between the second premolar and first permanent molar.
장치: Temporary Anchorage Device (TAD)
The TAD (1.6 mm diameter X 6 mm length; J2, Dual-Top Anchor System, Jeil Medical, Seoul, Korea) will be inserted directly against cortical bone surface at 30-45° to the occlusal plane, targeted anatomically between second premolar and first permanent molar. The device will be manually driven into the alveolar bone using a manual torque driver calibrated to a 10 Ncm torque value
장치: Two-step Angulation with Partial Unwinding Technique
  • The TAD (1.6 mm diameter X 6 mm length; J2, Dual-Top Anchor System, Jeil Medical, Seoul, Korea) is initially placed against cortical bone surface parallel to the occlusal plane between second premolar and first permanent molar to create an initial osseous indentation.
  • A slitted rubber stopper will be used to mark the depth of the TAD tip penetration through the cortical bone, predetermined via CBCT assessment of local cortical bone thickness.
  • The TAD will undergo partial derotation (unwinding) by half the total number of initial insertion turns to slightly back the device away from the cortical bone.
  • The TADs will then be reangulated to an oblique path of 30-45° relative to the occlusal plane before completing final seating between second premolar and first permanent molar
활성 비교기: Steady Oblique Angulation Technique
This is a split-mouth randomized clinical trial design where each participant serves as their own internal control. This arm represents the specific jaw quadrants randomized to receive Temporary Anchorage Device (TAD) insertion via a single-step, steady oblique angulation approach. The screw is inserted directly into the alveolar bone at a constant angle of 30 to 45 degree relative to the occlusal plane, targeted anatomically between the second premolar and first permanent molar.
장치: Temporary Anchorage Device (TAD)
The TAD (1.6 mm diameter X 6 mm length; J2, Dual-Top Anchor System, Jeil Medical, Seoul, Korea) will be inserted directly against cortical bone surface at 30-45° to the occlusal plane, targeted anatomically between second premolar and first permanent molar. The device will be manually driven into the alveolar bone using a manual torque driver calibrated to a 10 Ncm torque value
장치: Two-step Angulation with Partial Unwinding Technique
  • The TAD (1.6 mm diameter X 6 mm length; J2, Dual-Top Anchor System, Jeil Medical, Seoul, Korea) is initially placed against cortical bone surface parallel to the occlusal plane between second premolar and first permanent molar to create an initial osseous indentation.
  • A slitted rubber stopper will be used to mark the depth of the TAD tip penetration through the cortical bone, predetermined via CBCT assessment of local cortical bone thickness.
  • The TAD will undergo partial derotation (unwinding) by half the total number of initial insertion turns to slightly back the device away from the cortical bone.
  • The TADs will then be reangulated to an oblique path of 30-45° relative to the occlusal plane before completing final seating between second premolar and first permanent molar

연구는 무엇을 측정합니까?

주요 결과 측정

결과 측정
측정값 설명
기간
Survival rate
기간: Post alignment (at the start of enmasse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Months 3, Month 4, Months 5, Months 6.

Survival Rate Percentage of TADs that remain physically retained in bone (not necessarily stable for orthodontic load) over 6 months, regardless of whether they are functionally useful (Schätzle et al., 2009)

Citeria of Survived TADs Retain in bone regardless function and complications.

Mininum value:0% Maximum value: 100%

Higher value indicate greater percentage of TADs that remain physically retained in bone (not necessarily stable for orthodontic load)
Post alignment (at the start of enmasse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Months 3, Month 4, Months 5, Months 6.
Success rate
기간: at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.

Success Rate Percentage of TADs that remain functionally stable and serve their orthodontic purpose throughout treatment, without mobility, infection, or premature failure (Dalessandri et al., 2014)

Citeria of Success TADs (Sharma et al., 2011)

  • No inflammation of soft tissue surrounding TADs
  • No clinically detectable mobility (IST > 60)
  • Anchorage function sustained until the end of the purpose for which the TADs were used

Mininum value:0% Maximum value: 100% Higher value indicate higher percentage of TADs that remain functionally stable and serve their orthodontic purpose throughout treatment, without mobility, infection, or premature failure
at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.
Primary stability and secondary stability
기간: at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.

Primary stability Mechanical retention of a TAD immediately after placement, derived from the mechanical interlocking between the screw threads and the surrounding bone (Seifi & Matini, 2016)

Secondary stability Biological stabilisation of a TAD that occurs after healing and remodelling, primarily due to bone apposition and osseointegration around the device (Wu et al., 2021)

AnyCheck Implant Stability Meter (Figure 3.8) to determine stability of TADs by measuring implant Stability Test (iST) value at insertion T0 to T9.

Min value: 1 Max value: 99 Higher value indicate high stability of TADs

Interpretation of iST (Kim et al., 2020) IST Range Interpretation <60 Low primary stability 60-64 Moderate stability >64 High stability
at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.

2차 결과 측정

결과 측정
측정값 설명
기간
Patient- reported outcome
기간: at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.

Patient perception of pain at each quadrant (upper right, upper left, lower right, and lower left jaw) will be measured with a four-point Likert scale correlated with a 10-point Visual Analogue Scale (VAS).

Perceptions of swelling, chewing difficulty, and cleaning difficulty at each jaw quadrant will be captured using categorical dichotomous responses (Yes or No).

Patient reported outcome questionnaires (Appendix 2):

Patient perception of pain 0: No pain/VAS 0)

  1. Mild pain/VAS 1-4
  2. Moderate pain/VAS 5-6
  3. Severe or worsening pain/VAS 7-10 Perceptions of swelling, chewing difficulty, and cleaning difficulty Yes: Presence of swelling/ chewing difficulty/ cleaning difficulty No: Absence of swelling/ chewing difficulty/ cleaning difficulty
at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.
Trabecular bone volume fraction (BV/TV)
기간: During enmasse retraction at Month 6

Percentage of the volume of mineralized trabecular bone (bone volume, BV) to the total volume (TV) of the region of interest within cancellous bone. Association between maxillary and mandibular trabeculae bone volume fraction with TADs stability, survival and success

White region: (Bruker, 2013) Solid regions of the bony trabeculae areas within the range of the binary threshold selection

Black region:

Spaces among the bong mandibular trabeculae

Min value: 1% Max value: 99% Higher value indicate higher percentage of the volume of mineralized trabecular bone (bone volume, BV) to the total volume (TV) of the region of interest within cancellous bone. ercentage of the volume of mineralized trabecular bone (bone volume, BV) to the total volume (TV) of the region of interest within cancellous bone.
During enmasse retraction at Month 6
Complications (inflammation, mobility, or need for replacement)
기간: at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.
  1. Inflammation Redness, swelling or bleeding on touching around the neck of the TADs (Park et al., 2006; Samrit et al., 2012) Inflammation (Park et al., 2006; Samrit et al., 2012) Yes: Presence of redness, swelling or bleeding on touching around the neck of the TADs No: Absence of redness, swelling or bleeding on touching around the neck of the TADs
  2. Mobility Mobility will be checked with AnyCheck implant stability meter. Mobility (Kim et al., 2020) Yes: Mobile (IST < 60) No: Not mobile (IST > 60)
  3. Need for replacement of TADs Removal and reinsertion of a TADs at a new or the same site due to loss of stability, inflammation, root contact, soft-tissue complications, or poor anchorage performance during orthodontic treatment.

Need for replacement Yes: Need replacement of TADs (IST < 60) No: No need replacement of TADs (IST > 60)
at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.

공동 작업자 및 조사자

여기에서 이 연구와 관련된 사람과 조직을 찾을 수 있습니다.

스폰서

University of Malaya

연구 기록 날짜

이 날짜는 ClinicalTrials.gov에 대한 연구 기록 및 요약 결과 제출의 진행 상황을 추적합니다. 연구 기록 및 보고된 결과는 공개 웹사이트에 게시되기 전에 특정 품질 관리 기준을 충족하는지 확인하기 위해 국립 의학 도서관(NLM)에서 검토합니다.

연구 주요 날짜

연구 시작 (추정된)

2026년 8월 1일

기본 완료 (추정된)

2028년 7월 31일

연구 완료 (추정된)

2028년 7월 31일

연구 등록 날짜

최초 제출

2026년 7월 9일

QC 기준을 충족하는 최초 제출

2026년 7월 14일

처음 게시됨 (실제)

2026년 7월 21일

연구 기록 업데이트

마지막 업데이트 게시됨 (실제)

2026년 7월 21일

QC 기준을 충족하는 마지막 업데이트 제출

2026년 7월 14일

마지막으로 확인됨

2026년 6월 1일

추가 정보

이 연구와 관련된 용어

키워드

기타 연구 ID 번호

  • DF CD2615/0058(P)
  • UMG-2026 (기타 보조금/기금 번호: Universiti Malaya)

개별 참가자 데이터(IPD) 계획

개별 참가자 데이터(IPD)를 공유할 계획입니까?

아니요

약물 및 장치 정보, 연구 문서

미국 FDA 규제 의약품 연구

아니

미국 FDA 규제 기기 제품 연구

아니

미국에서 제조되어 미국에서 수출되는 제품

아니

이 정보는 변경 없이 clinicaltrials.gov 웹사이트에서 직접 가져온 것입니다. 귀하의 연구 세부 정보를 변경, 제거 또는 업데이트하도록 요청하는 경우 register@clinicaltrials.gov. 문의하십시오. 변경 사항이 clinicaltrials.gov에 구현되는 즉시 저희 웹사이트에도 자동으로 업데이트됩니다. .

구독하다