Tämä sivu käännettiin automaattisesti, eikä käännösten tarkkuutta voida taata. Katso englanninkielinen versio lähdetekstiä varten.

Survival, Success, Stability, and Patient Comfort of TADs Placed by Steady Oblique-Angled Versus Two-Step Angulation Insertion Techniques

tiistai 14. heinäkuuta 2026 päivittänyt: University of Malaya

Survival, Success, Stability, and Patient Comfort of Temporary Anchorage Devices Placed by Steady Oblique-Angled Versus Two-Step Angulation Insertion Techniques: A Split-Mouth Randomised Clinical Trial

The goal of this clinical trial is to learn if two-step angulation Temporary Anchorage Devices (TADs) insertion technique better for survival, stability and patient-reported outcomes. It will also learn about how the trabecular bone volume fraction measured from pre-treatment CBCT imaging influences the stability, survival, and overall clinical success of TADs. The clinical trial will be carried out among fit and healthy adults aged 18 years old above who require extraction of all four permanent first premolars, planned for maximum anchorage using bilateral maxillary and mandibular TADs.

The main questions it aims to answer are:

In orthodontic patients,

  • does the two-step angulation insertion technique for TADs provide superior survival, stability, and patient-reported outcomes, with acceptable complication rates?
  • how are these outcomes influenced by maxillary and mandibular trabecular bone volume fraction measured on CBCT?

Researchers will compare two-step angulation insertion technique to steady oblique-angled TADs insertion technique to see it provide more superior survival, stability, and patient-reported outcomes, with acceptable complication rates.

Participants will:

  • be taken CBCT radiography before TADs insertion
  • receive both TADs insertion technique either right or left on both maxilla and mandible between second premolars and first molars
  • fill up patient reported outcome questionnaire At immediate post-insertion (T0), post alignment (T1), and subsequently at monthly intervals during en-masse retraction: 1 month (T2), 2 months (T3), 3 months (T4), 4 months (T5), 5 months (T6), 6 months (T7)
  • visit the clinic for measurement of TADs stability, clinical assessment of inflammation, mobility and the need for replacement at immediate post-insertion (T0), post alignment (T1), and subsequently at monthly intervals during en-masse retraction: 1 month (T2), 2 months (T3), 3 months (T4), 4 months (T5), 5 months (T6), 6 months (T7)

Tutkimuksen yleiskatsaus

Opintotyyppi

Interventio

Ilmoittautuminen (Arvioitu)

28

Vaihe

  • Ei sovellettavissa

Yhteystiedot ja paikat

Tässä osiossa on tutkimuksen suorittajien yhteystiedot ja tiedot siitä, missä tämä tutkimus suoritetaan.

Opiskeluyhteys

Opiskelupaikat

    • Kuala Lumpur
      • Kuala Lumpur, Kuala Lumpur, Malesia, 50603
        • Faculty of Dentistry, Universiti Malaya
        • Ottaa yhteyttä:
        • Päätutkija:
          • Saritha Sivarajan
        • Alatutkija:
          • Siti Adibah Othman
        • Alatutkija:
          • Maziahtul Zawani Munshi
        • Päätutkija:
          • Wan Ying Lee

Osallistumiskriteerit

Tutkijat etsivät ihmisiä, jotka sopivat tiettyyn kuvaukseen, jota kutsutaan kelpoisuuskriteereiksi. Joitakin esimerkkejä näistä kriteereistä ovat henkilön yleinen terveydentila tai aiemmat hoidot.

Kelpoisuusvaatimukset

Opintokelpoiset iät

  • Aikuinen
  • Vanhempi Aikuinen

Hyväksyy terveitä vapaaehtoisia

Ei

Kuvaus

Inclusion Criteria:

  • Age range: 18 years old and above
  • Bimaxillary proclination with maximum anchorage control with TAD in maxilla and mandible
  • Extraction of all four permanent first premolar as part of orthodontic treatment
  • Crowding in the upper and lower incisors (< 5.0mm)
  • Overjet less than 6mm
  • BPE score 0, 1 or 2
  • Average vertical facial proportions

Exclusion Criteria:

  • Systemic diseases such as diabetes, osteoporosis
  • On long term use of antibiotics, phenytoin, cyclosporin, anti-inflammatory drugs, systemic corticosteroid and calcium channel blockers that would affect the bone biology
  • Cigarette smoking, vaping, history of smoking
  • Impacted / missing teeth at the treatment site
  • BPE score 3 and 4
  • Vertical skeletal discrepancies e.g. high angle and low angle.
  • Orthognathic treatment need
  • Craniofacial disorder, cleft lip and palate, syndromes
  • Low maxillary sinus level with alveolar crest height of less than 4mm
  • Titanium allergy
  • Pregnant woman

Opintosuunnitelma

Tässä osiossa on tietoja tutkimussuunnitelmasta, mukaan lukien kuinka tutkimus on suunniteltu ja mitä tutkimuksella mitataan.

Miten tutkimus on suunniteltu?

Suunnittelun yksityiskohdat

  • Ensisijainen käyttötarkoitus: Hoito
  • Jako: Satunnaistettu
  • Inventiomalli: Rinnakkaistehtävä
  • Naamiointi: Yksittäinen

Aseet ja interventiot

Osallistujaryhmä / Arm
Interventio / Hoito
Kokeellinen: Two-step Angulation with Partial Unwinding Technique
This is a split-mouth randomized clinical trial design where each participant serves as their own internal control. This arm represents the specific jaw quadrants randomized to receive Temporary Anchorage Device (TAD) insertion using a two-step angulation with a partial unwinding technique. The TAD is first placed parallel to the occlusal plane to create a cortical bone indentation (guided by a rubber depth stopper based on CBCT bone thickness), partially backed out (derotated) by half a turn, and subsequently reangulated to a final seating angle of 30-45 degree relative to the occlusal plane between the second premolar and first permanent molar.
The TAD (1.6 mm diameter X 6 mm length; J2, Dual-Top Anchor System, Jeil Medical, Seoul, Korea) will be inserted directly against cortical bone surface at 30-45° to the occlusal plane, targeted anatomically between second premolar and first permanent molar. The device will be manually driven into the alveolar bone using a manual torque driver calibrated to a 10 Ncm torque value
  • The TAD (1.6 mm diameter X 6 mm length; J2, Dual-Top Anchor System, Jeil Medical, Seoul, Korea) is initially placed against cortical bone surface parallel to the occlusal plane between second premolar and first permanent molar to create an initial osseous indentation.
  • A slitted rubber stopper will be used to mark the depth of the TAD tip penetration through the cortical bone, predetermined via CBCT assessment of local cortical bone thickness.
  • The TAD will undergo partial derotation (unwinding) by half the total number of initial insertion turns to slightly back the device away from the cortical bone.
  • The TADs will then be reangulated to an oblique path of 30-45° relative to the occlusal plane before completing final seating between second premolar and first permanent molar
Active Comparator: Steady Oblique Angulation Technique
This is a split-mouth randomized clinical trial design where each participant serves as their own internal control. This arm represents the specific jaw quadrants randomized to receive Temporary Anchorage Device (TAD) insertion via a single-step, steady oblique angulation approach. The screw is inserted directly into the alveolar bone at a constant angle of 30 to 45 degree relative to the occlusal plane, targeted anatomically between the second premolar and first permanent molar.
The TAD (1.6 mm diameter X 6 mm length; J2, Dual-Top Anchor System, Jeil Medical, Seoul, Korea) will be inserted directly against cortical bone surface at 30-45° to the occlusal plane, targeted anatomically between second premolar and first permanent molar. The device will be manually driven into the alveolar bone using a manual torque driver calibrated to a 10 Ncm torque value
  • The TAD (1.6 mm diameter X 6 mm length; J2, Dual-Top Anchor System, Jeil Medical, Seoul, Korea) is initially placed against cortical bone surface parallel to the occlusal plane between second premolar and first permanent molar to create an initial osseous indentation.
  • A slitted rubber stopper will be used to mark the depth of the TAD tip penetration through the cortical bone, predetermined via CBCT assessment of local cortical bone thickness.
  • The TAD will undergo partial derotation (unwinding) by half the total number of initial insertion turns to slightly back the device away from the cortical bone.
  • The TADs will then be reangulated to an oblique path of 30-45° relative to the occlusal plane before completing final seating between second premolar and first permanent molar

Mitä tutkimuksessa mitataan?

Ensisijaiset tulostoimenpiteet

Tulosmittaus
Toimenpiteen kuvaus
Aikaikkuna
Survival rate
Aikaikkuna: Post alignment (at the start of enmasse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Months 3, Month 4, Months 5, Months 6.

Survival Rate Percentage of TADs that remain physically retained in bone (not necessarily stable for orthodontic load) over 6 months, regardless of whether they are functionally useful (Schätzle et al., 2009)

Citeria of Survived TADs Retain in bone regardless function and complications.

Mininum value:0% Maximum value: 100%

Higher value indicate greater percentage of TADs that remain physically retained in bone (not necessarily stable for orthodontic load)

Post alignment (at the start of enmasse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Months 3, Month 4, Months 5, Months 6.
Success rate
Aikaikkuna: at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.

Success Rate Percentage of TADs that remain functionally stable and serve their orthodontic purpose throughout treatment, without mobility, infection, or premature failure (Dalessandri et al., 2014)

Citeria of Success TADs (Sharma et al., 2011)

  • No inflammation of soft tissue surrounding TADs
  • No clinically detectable mobility (IST > 60)
  • Anchorage function sustained until the end of the purpose for which the TADs were used

Mininum value:0% Maximum value: 100% Higher value indicate higher percentage of TADs that remain functionally stable and serve their orthodontic purpose throughout treatment, without mobility, infection, or premature failure

at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.
Primary stability and secondary stability
Aikaikkuna: at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.

Primary stability Mechanical retention of a TAD immediately after placement, derived from the mechanical interlocking between the screw threads and the surrounding bone (Seifi & Matini, 2016)

Secondary stability Biological stabilisation of a TAD that occurs after healing and remodelling, primarily due to bone apposition and osseointegration around the device (Wu et al., 2021)

AnyCheck Implant Stability Meter (Figure 3.8) to determine stability of TADs by measuring implant Stability Test (iST) value at insertion T0 to T9.

Min value: 1 Max value: 99 Higher value indicate high stability of TADs

Interpretation of iST (Kim et al., 2020) IST Range Interpretation <60 Low primary stability 60-64 Moderate stability >64 High stability

at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.

Toissijaiset tulostoimenpiteet

Tulosmittaus
Toimenpiteen kuvaus
Aikaikkuna
Patient- reported outcome
Aikaikkuna: at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.

Patient perception of pain at each quadrant (upper right, upper left, lower right, and lower left jaw) will be measured with a four-point Likert scale correlated with a 10-point Visual Analogue Scale (VAS).

Perceptions of swelling, chewing difficulty, and cleaning difficulty at each jaw quadrant will be captured using categorical dichotomous responses (Yes or No).

Patient reported outcome questionnaires (Appendix 2):

Patient perception of pain 0: No pain/VAS 0)

  1. Mild pain/VAS 1-4
  2. Moderate pain/VAS 5-6
  3. Severe or worsening pain/VAS 7-10 Perceptions of swelling, chewing difficulty, and cleaning difficulty Yes: Presence of swelling/ chewing difficulty/ cleaning difficulty No: Absence of swelling/ chewing difficulty/ cleaning difficulty
at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.
Trabecular bone volume fraction (BV/TV)
Aikaikkuna: During enmasse retraction at Month 6

Percentage of the volume of mineralized trabecular bone (bone volume, BV) to the total volume (TV) of the region of interest within cancellous bone. Association between maxillary and mandibular trabeculae bone volume fraction with TADs stability, survival and success

White region: (Bruker, 2013) Solid regions of the bony trabeculae areas within the range of the binary threshold selection

Black region:

Spaces among the bong mandibular trabeculae

Min value: 1% Max value: 99% Higher value indicate higher percentage of the volume of mineralized trabecular bone (bone volume, BV) to the total volume (TV) of the region of interest within cancellous bone. ercentage of the volume of mineralized trabecular bone (bone volume, BV) to the total volume (TV) of the region of interest within cancellous bone.

During enmasse retraction at Month 6
Complications (inflammation, mobility, or need for replacement)
Aikaikkuna: at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.
  1. Inflammation Redness, swelling or bleeding on touching around the neck of the TADs (Park et al., 2006; Samrit et al., 2012) Inflammation (Park et al., 2006; Samrit et al., 2012) Yes: Presence of redness, swelling or bleeding on touching around the neck of the TADs No: Absence of redness, swelling or bleeding on touching around the neck of the TADs
  2. Mobility Mobility will be checked with AnyCheck implant stability meter. Mobility (Kim et al., 2020) Yes: Mobile (IST < 60) No: Not mobile (IST > 60)
  3. Need for replacement of TADs Removal and reinsertion of a TADs at a new or the same site due to loss of stability, inflammation, root contact, soft-tissue complications, or poor anchorage performance during orthodontic treatment.

Need for replacement Yes: Need replacement of TADs (IST < 60) No: No need replacement of TADs (IST > 60)

at immediate post-insertion (Day 0), post alignment (at the start of en-masse retraction), and subsequently at monthly intervals during en-masse retraction: Month 1, Month 2, Month 3, Month 4, Month 5, and Month 6.

Yhteistyökumppanit ja tutkijat

Täältä löydät tähän tutkimukseen osallistuvat ihmiset ja organisaatiot.

Opintojen ennätyspäivät

Nämä päivämäärät seuraavat ClinicalTrials.gov-sivustolle lähetettyjen tutkimustietueiden ja yhteenvetojen edistymistä. National Library of Medicine (NLM) tarkistaa tutkimustiedot ja raportoidut tulokset varmistaakseen, että ne täyttävät tietyt laadunvalvontastandardit, ennen kuin ne julkaistaan ​​julkisella verkkosivustolla.

Opi tärkeimmät päivämäärät

Opiskelun aloitus (Arvioitu)

Lauantai 1. elokuuta 2026

Ensisijainen valmistuminen (Arvioitu)

Maanantai 31. heinäkuuta 2028

Opintojen valmistuminen (Arvioitu)

Maanantai 31. heinäkuuta 2028

Opintoihin ilmoittautumispäivät

Ensimmäinen lähetetty

Torstai 9. heinäkuuta 2026

Ensimmäinen toimitettu, joka täytti QC-kriteerit

Tiistai 14. heinäkuuta 2026

Ensimmäinen Lähetetty (Todellinen)

Tiistai 21. heinäkuuta 2026

Tutkimustietojen päivitykset

Viimeisin päivitys julkaistu (Todellinen)

Tiistai 21. heinäkuuta 2026

Viimeisin lähetetty päivitys, joka täytti QC-kriteerit

Tiistai 14. heinäkuuta 2026

Viimeksi vahvistettu

Maanantai 1. kesäkuuta 2026

Lisää tietoa

Tähän tutkimukseen liittyvät termit

Muut tutkimustunnusnumerot

  • DF CD2615/0058(P)
  • UMG-2026 (Muu apuraha/rahoitusnumero: Universiti Malaya)

Yksittäisten osallistujien tietojen suunnitelma (IPD)

Aiotko jakaa yksittäisten osallistujien tietoja (IPD)?

EI

Lääke- ja laitetiedot, tutkimusasiakirjat

Tutkii yhdysvaltalaista FDA sääntelemää lääkevalmistetta

Ei

Tutkii yhdysvaltalaista FDA sääntelemää laitetuotetta

Ei

Yhdysvalloissa valmistettu ja sieltä viety tuote

Ei

Nämä tiedot haettiin suoraan verkkosivustolta clinicaltrials.gov ilman muutoksia. Jos sinulla on pyyntöjä muuttaa, poistaa tai päivittää tutkimustietojasi, ota yhteyttä register@clinicaltrials.gov. Heti kun muutos on otettu käyttöön osoitteessa clinicaltrials.gov, se päivitetään automaattisesti myös verkkosivustollemme .

Tilaa