此页面是自动翻译的，不保证翻译的准确性。请参阅英文版对于源文本。

Long-Term Bone Dimensional Changes Following Flapless Immediate Implant Placement

2026年9月4日更新者：International Dental Contiuing Education

Long-Term Bone Dimensional Changes Following Flapless Immediate Implant Placement With or Without Bone Grafting: A 5 Years Follow up of a Randomized Clinical Trial

Nowadays, achieving long-term hard tissue stability is the definitive goal of a successful immediate implant placement and has become the optimal challenge for clinicians over the past few decades. It is wellestablished that the dimensional changes and remodeling of the alveolar ridge represent a physiologic sequela of tooth extraction and is inevitable especially the labial bone wall. This creates an unfavorable labio-palatal discrepancy and produces the "fixture-socket gap" around the coronal portion of the implant, known as the labial gap especially in sockets with thin bone.Although this gap has the potential to repair spontaneously in some cases, still previous studies reported that this gap cannot be completely filled without using a regenerative material. It has been claimed that buccal/labial gap augmentation contributes to the final esthetic success of the dental implant, where the regenerative material acts as a scaffold to maintain the blood clot, promote bone formation, compensate for the postextraction socket remodeling and maintain the buccal bone thickness and thereby preventing the buccal contour collapse. Nevertheless, this would add an additional cost and prolong the surgical procedure. Meanwhile, there is a controversy in the existing literature regarding the actual benefit of using bone grafts in the buccal gap. Previous systematic reviews concluded that there is not sufficient evidence to prove that immediate implant placement with grafting the labial gap, would comprise an additional benefit in preventing alveolar ridge reduction and contour collapse. Furthermore, previous controlled clinical trials reported that evidence for this additional treatment is still unclear.

研究概览

地位

尚未招聘

条件

Thin Labial Plate

干预/治疗

详细说明

Patients who completed the initial trial and received a single immediate implant in a fresh extraction socket would be invited for reassessment at 5 years after implant placement. The intervention group would comprise patients treated with flapless immediate implant placement combined with grafting of the peri-implant gap using the same bone-substitute material and protocol applied in the original study, while the control group would comprise patients treated with flapless immediate implant placement without bone grafting. The primary outcome would be the change in peri-implant marginal bone level and three-dimensional alveolar ridge dimensions, assessed by standardized periapical radiographs and, where ethically and clinically justified, limited-field cone-beam computed tomography, compared with baseline and the earlier follow-up measurements. Secondary outcomes would include implant survival and success, peri-implant probing depth, bleeding on probing, plaque accumulation, mucosal recession, width of keratinized mucosa, facial soft-tissue profile, biological complications, prosthetic complications, patient satisfaction, and esthetic outcomes. Assessments should be performed by calibrated, blinded examiners using standardized imaging and clinical protocols. The study would analyze all eligible participants according to their original randomized allocation, report reasons for loss to follow-up, and compare the long-term dimensional stability and clinical performance of grafted versus nongrafted sites. The principal hypothesis would be that bone grafting may reduce long-term horizontal ridge resorption and improve preservation of the facial contour without adversely affecting implant survival or peri-implant health over the 5-year observation period.

研究类型

介入性

注册 (估计的)

阶段

不适用

联系人和位置

本节提供了进行研究的人员的详细联系信息，以及有关进行该研究的地点的信息。

学习地点

埃及
- - Cairo、埃及
    - International Dental Continuing Education (IDCE) Research Institute

参与标准

研究人员寻找符合特定描述的人，称为资格标准。这些标准的一些例子是一个人的一般健康状况或先前的治疗。

资格标准

适合学习的年龄

成人

接受健康志愿者

不

描述

Inclusion Criteria:

Adult (>20 years) with nonrestorable maxillary teeth in the esthetic zone, thick gingival phenotype, intact but thin labial plate of bone extending 7 mm (≤1 mm) and intact palatal bone extending at least 6 mm apically, sufficient apical bone to attain implant primary stability (a minimum of 35 N cm insertion torque) and labio-palatal socket dimension measured from the CBCT axial cut at mid-crestal part ≥5 mm.

Exclusion Criteria:

Smokers, pregnant women, patients with systemic disease, patients with parafunctional habits such as bruxism or clenching, infected socket, periapical pathosis and history of radiotherapy or chemotherapy within the past 2 years.

学习计划

本节提供研究计划的详细信息，包括研究的设计方式和研究的衡量标准。

研究是如何设计的？

设计细节

主要用途：其他
分配：随机化
介入模型：并行分配
屏蔽：单身的

手臂数量

武器和干预

参与者组/臂	干预/治疗
有源比较器：IIP + Bone graft + CHA For patients assigned to receive a graft, demineralized bovine bone graft (Bio-Oss, Geistlich Pharma AG, Wolhusen, Switzerland) was placed in the gap labial to the implant to the level of the implant platform.	程序：IIP+Bone graft + CHA A tapered screw-vent bone level implant (Zimmer implant TSV, IN, USA) was inserted into the extraction socket in a flapless manner, engaging 3-4 mm of the sound intact apical and palatal bone to achieve primary stability using the motor and manual torque wrench which was set to be at least 35 N cm to allow nonfunctional immediate loading. The implant platform was located 1.5 mm subcrestal or equicrestal to the labial bone and the implant diameter was selected to leave a labial gap of at least 1.5 mm. Following implant placement, randomization sequence with allocation to either graft or no graft group was revealed. For patients assigned to receive a graft, demineralized bovine bone graft (Bio-Oss, Geistlich Pharma AG, Wolhusen, Switzerland) was placed in the gap labial to the implant to the level of the implant platform.
实验性的：IIP + CHA only A tapered screw-vent bone level implant (Zimmer implant TSV, IN, USA) was inserted into the extraction socket in a flapless manner, engaging mm of the sound intact apical and palatal bone to achieve primary stability using the motor and manual torque wrench which was set to be at least 35 N cm to allow nonfunctional immediate loading. The implant platform was located 1.5 mm subcrestal or equicrestal to the labial bone and the implant diameter was selected to leave a labial gap of at least 1.5 mm. Following implant placement, patients received an immediate anatomical customized healing abutment fabricated by adding flowable composite to the temporary cylindrical abutment mimicking the shape of the socket at the marginal gingiva (Filtek™ Supreme Ultra Flowable Restorative, 3M Corporate Headquarters, MN, USA). It was then screwed to the implant	程序：IIP +CHA only A tapered screw-vent bone level implant (Zimmer implant TSV, IN, USA) was inserted into the extraction socket in a flapless manner, engaging 3-4 mm of the sound intact apical and palatal bone to achieve primary stability using the motor and manual torque wrench which was set to be at least 35 N cm to allow nonfunctional immediate loading. The implant platform was located 1.5 mm subcrestal or equicrestal to the labial bone and the implant diameter was selected to leave a labial gap of at least 1.5 mm. Following implant placement, randomization sequence with allocation to either graft or no graft group was revealed. For patients assigned to receive no graft an immediate anatomical customized healing abutment fabricated by adding flowable composite to the temporary cylindrical abutment mimicking the mimicking the shape of the socket at the marginal gingiva was screwed to the implant

参与者组/臂

干预/治疗

有源比较器：IIP + Bone graft + CHA

For patients assigned to receive a graft, demineralized bovine bone graft (Bio-Oss, Geistlich Pharma AG, Wolhusen, Switzerland) was placed in the gap labial to the implant to the level of the implant platform.

程序：IIP+Bone graft + CHA

A tapered screw-vent bone level implant (Zimmer implant TSV, IN, USA) was inserted into the extraction socket in a flapless manner, engaging 3-4 mm of the sound intact apical and palatal bone to achieve primary stability using the motor and manual torque wrench which was set to be at least 35 N cm to allow nonfunctional immediate loading. The implant platform was located 1.5 mm subcrestal or equicrestal to the labial bone and the implant diameter was selected to leave a labial gap of at least 1.5 mm. Following implant placement, randomization sequence with allocation to either graft or no graft group was revealed. For patients assigned to receive a graft, demineralized bovine bone graft (Bio-Oss, Geistlich Pharma AG, Wolhusen, Switzerland) was placed in the gap labial to the implant to the level of the implant platform.

实验性的：IIP + CHA only

A tapered screw-vent bone level implant (Zimmer implant TSV, IN, USA) was inserted into the extraction socket in a flapless manner, engaging mm of the sound intact apical and palatal bone to achieve primary stability using the motor and manual torque wrench which was set to be at least 35 N cm to allow nonfunctional immediate loading. The implant platform was located 1.5 mm subcrestal or equicrestal to the labial bone and the implant diameter was selected to leave a labial gap of at least 1.5 mm. Following implant placement, patients received an immediate anatomical customized healing abutment fabricated by adding flowable composite to the temporary cylindrical abutment mimicking the shape of the socket at the marginal gingiva (Filtek™ Supreme Ultra Flowable Restorative, 3M Corporate Headquarters, MN, USA). It was then screwed to the implant

程序：IIP +CHA only

A tapered screw-vent bone level implant (Zimmer implant TSV, IN, USA) was inserted into the extraction socket in a flapless manner, engaging 3-4 mm of the sound intact apical and palatal bone to achieve primary stability using the motor and manual torque wrench which was set to be at least 35 N cm to allow nonfunctional immediate loading. The implant platform was located 1.5 mm subcrestal or equicrestal to the labial bone and the implant diameter was selected to leave a labial gap of at least 1.5 mm. Following implant placement, randomization sequence with allocation to either graft or no graft group was revealed. For patients assigned to receive no graft an immediate anatomical customized healing abutment fabricated by adding flowable composite to the temporary cylindrical abutment mimicking the mimicking the shape of the socket at the marginal gingiva was screwed to the implant

研究衡量的是什么？

主要结果指标

结果测量	措施说明	大体时间
Labial bone formed labial to the implant 大体时间：5 years follow up	Measure using the CBCT, the amount of bone formed labial to the implant	5 years follow up

合作者和调查者

在这里您可以找到参与这项研究的人员和组织。

赞助

International Dental Contiuing Education

研究记录日期

这些日期跟踪向 ClinicalTrials.gov 提交研究记录和摘要结果的进度。研究记录和报告的结果由国家医学图书馆 (NLM) 审查，以确保它们在发布到公共网站之前符合特定的质量控制标准。

研究主要日期

学习开始 (估计的)

2026年10月1日

初级完成 (估计的)

2026年11月1日

研究完成 (估计的)

2026年12月1日

研究注册日期

首次提交

2026年9月4日

首先提交符合 QC 标准的

2026年9月4日

首次发布 (实际的)

2026年9月10日

研究记录更新

最后更新发布 (实际的)

2026年9月10日

上次提交的符合 QC 标准的更新

2026年9月4日

最后验证

2026年9月1日

Long-Term Bone Dimensional Changes Following Flapless Immediate Implant Placement