Tämä sivu käännettiin automaattisesti, eikä käännösten tarkkuutta voida taata. Katso englanninkielinen versio lähdetekstiä varten.

Long-Term Bone Dimensional Changes Following Flapless Immediate Implant Placement

perjantai 4. syyskuuta 2026 päivittänyt: International Dental Contiuing Education

Long-Term Bone Dimensional Changes Following Flapless Immediate Implant Placement With or Without Bone Grafting: A 5 Years Follow up of a Randomized Clinical Trial

Nowadays, achieving long-term hard tissue stability is the definitive goal of a successful immediate implant placement and has become the optimal challenge for clinicians over the past few decades. It is wellestablished that the dimensional changes and remodeling of the alveolar ridge represent a physiologic sequela of tooth extraction and is inevitable especially the labial bone wall. This creates an unfavorable labio-palatal discrepancy and produces the "fixture-socket gap" around the coronal portion of the implant, known as the labial gap especially in sockets with thin bone.Although this gap has the potential to repair spontaneously in some cases, still previous studies reported that this gap cannot be completely filled without using a regenerative material. It has been claimed that buccal/labial gap augmentation contributes to the final esthetic success of the dental implant, where the regenerative material acts as a scaffold to maintain the blood clot, promote bone formation, compensate for the postextraction socket remodeling and maintain the buccal bone thickness and thereby preventing the buccal contour collapse. Nevertheless, this would add an additional cost and prolong the surgical procedure. Meanwhile, there is a controversy in the existing literature regarding the actual benefit of using bone grafts in the buccal gap. Previous systematic reviews concluded that there is not sufficient evidence to prove that immediate implant placement with grafting the labial gap, would comprise an additional benefit in preventing alveolar ridge reduction and contour collapse. Furthermore, previous controlled clinical trials reported that evidence for this additional treatment is still unclear.

Tutkimuksen yleiskatsaus

Tila

Ei vielä rekrytointia

Ehdot

Thin Labial Plate

Interventio / Hoito

Yksityiskohtainen kuvaus

Patients who completed the initial trial and received a single immediate implant in a fresh extraction socket would be invited for reassessment at 5 years after implant placement. The intervention group would comprise patients treated with flapless immediate implant placement combined with grafting of the peri-implant gap using the same bone-substitute material and protocol applied in the original study, while the control group would comprise patients treated with flapless immediate implant placement without bone grafting. The primary outcome would be the change in peri-implant marginal bone level and three-dimensional alveolar ridge dimensions, assessed by standardized periapical radiographs and, where ethically and clinically justified, limited-field cone-beam computed tomography, compared with baseline and the earlier follow-up measurements. Secondary outcomes would include implant survival and success, peri-implant probing depth, bleeding on probing, plaque accumulation, mucosal recession, width of keratinized mucosa, facial soft-tissue profile, biological complications, prosthetic complications, patient satisfaction, and esthetic outcomes. Assessments should be performed by calibrated, blinded examiners using standardized imaging and clinical protocols. The study would analyze all eligible participants according to their original randomized allocation, report reasons for loss to follow-up, and compare the long-term dimensional stability and clinical performance of grafted versus nongrafted sites. The principal hypothesis would be that bone grafting may reduce long-term horizontal ridge resorption and improve preservation of the facial contour without adversely affecting implant survival or peri-implant health over the 5-year observation period.

Opintotyyppi

Interventio

Ilmoittautuminen (Arvioitu)

Vaihe

Ei sovellettavissa

Yhteystiedot ja paikat

Tässä osiossa on tutkimuksen suorittajien yhteystiedot ja tiedot siitä, missä tämä tutkimus suoritetaan.

Opiskelupaikat

Egypti
- - Cairo, Egypti
    - International Dental Continuing Education (IDCE) Research Institute

Osallistumiskriteerit

Tutkijat etsivät ihmisiä, jotka sopivat tiettyyn kuvaukseen, jota kutsutaan kelpoisuuskriteereiksi. Joitakin esimerkkejä näistä kriteereistä ovat henkilön yleinen terveydentila tai aiemmat hoidot.

Kelpoisuusvaatimukset

Opintokelpoiset iät

Aikuinen

Hyväksyy terveitä vapaaehtoisia

Kuvaus

Inclusion Criteria:

Adult (>20 years) with nonrestorable maxillary teeth in the esthetic zone, thick gingival phenotype, intact but thin labial plate of bone extending 7 mm (≤1 mm) and intact palatal bone extending at least 6 mm apically, sufficient apical bone to attain implant primary stability (a minimum of 35 N cm insertion torque) and labio-palatal socket dimension measured from the CBCT axial cut at mid-crestal part ≥5 mm.

Exclusion Criteria:

Smokers, pregnant women, patients with systemic disease, patients with parafunctional habits such as bruxism or clenching, infected socket, periapical pathosis and history of radiotherapy or chemotherapy within the past 2 years.

Opintosuunnitelma

Tässä osiossa on tietoja tutkimussuunnitelmasta, mukaan lukien kuinka tutkimus on suunniteltu ja mitä tutkimuksella mitataan.

Miten tutkimus on suunniteltu?

Suunnittelun yksityiskohdat

Ensisijainen käyttötarkoitus: Muut
Jako: Satunnaistettu
Inventiomalli: Rinnakkaistehtävä
Naamiointi: Yksittäinen

Aseiden lukumäärä

Aseet ja interventiot

Osallistujaryhmä / Arm	Interventio / Hoito
Active Comparator: IIP + Bone graft + CHA For patients assigned to receive a graft, demineralized bovine bone graft (Bio-Oss, Geistlich Pharma AG, Wolhusen, Switzerland) was placed in the gap labial to the implant to the level of the implant platform.	Menettely: IIP+Bone graft + CHA A tapered screw-vent bone level implant (Zimmer implant TSV, IN, USA) was inserted into the extraction socket in a flapless manner, engaging 3-4 mm of the sound intact apical and palatal bone to achieve primary stability using the motor and manual torque wrench which was set to be at least 35 N cm to allow nonfunctional immediate loading. The implant platform was located 1.5 mm subcrestal or equicrestal to the labial bone and the implant diameter was selected to leave a labial gap of at least 1.5 mm. Following implant placement, randomization sequence with allocation to either graft or no graft group was revealed. For patients assigned to receive a graft, demineralized bovine bone graft (Bio-Oss, Geistlich Pharma AG, Wolhusen, Switzerland) was placed in the gap labial to the implant to the level of the implant platform.
Kokeellinen: IIP + CHA only A tapered screw-vent bone level implant (Zimmer implant TSV, IN, USA) was inserted into the extraction socket in a flapless manner, engaging mm of the sound intact apical and palatal bone to achieve primary stability using the motor and manual torque wrench which was set to be at least 35 N cm to allow nonfunctional immediate loading. The implant platform was located 1.5 mm subcrestal or equicrestal to the labial bone and the implant diameter was selected to leave a labial gap of at least 1.5 mm. Following implant placement, patients received an immediate anatomical customized healing abutment fabricated by adding flowable composite to the temporary cylindrical abutment mimicking the shape of the socket at the marginal gingiva (Filtek™ Supreme Ultra Flowable Restorative, 3M Corporate Headquarters, MN, USA). It was then screwed to the implant	Menettely: IIP +CHA only A tapered screw-vent bone level implant (Zimmer implant TSV, IN, USA) was inserted into the extraction socket in a flapless manner, engaging 3-4 mm of the sound intact apical and palatal bone to achieve primary stability using the motor and manual torque wrench which was set to be at least 35 N cm to allow nonfunctional immediate loading. The implant platform was located 1.5 mm subcrestal or equicrestal to the labial bone and the implant diameter was selected to leave a labial gap of at least 1.5 mm. Following implant placement, randomization sequence with allocation to either graft or no graft group was revealed. For patients assigned to receive no graft an immediate anatomical customized healing abutment fabricated by adding flowable composite to the temporary cylindrical abutment mimicking the mimicking the shape of the socket at the marginal gingiva was screwed to the implant

Osallistujaryhmä / Arm

Interventio / Hoito

Active Comparator: IIP + Bone graft + CHA

For patients assigned to receive a graft, demineralized bovine bone graft (Bio-Oss, Geistlich Pharma AG, Wolhusen, Switzerland) was placed in the gap labial to the implant to the level of the implant platform.

Menettely: IIP+Bone graft + CHA

A tapered screw-vent bone level implant (Zimmer implant TSV, IN, USA) was inserted into the extraction socket in a flapless manner, engaging 3-4 mm of the sound intact apical and palatal bone to achieve primary stability using the motor and manual torque wrench which was set to be at least 35 N cm to allow nonfunctional immediate loading. The implant platform was located 1.5 mm subcrestal or equicrestal to the labial bone and the implant diameter was selected to leave a labial gap of at least 1.5 mm. Following implant placement, randomization sequence with allocation to either graft or no graft group was revealed. For patients assigned to receive a graft, demineralized bovine bone graft (Bio-Oss, Geistlich Pharma AG, Wolhusen, Switzerland) was placed in the gap labial to the implant to the level of the implant platform.

Kokeellinen: IIP + CHA only

A tapered screw-vent bone level implant (Zimmer implant TSV, IN, USA) was inserted into the extraction socket in a flapless manner, engaging mm of the sound intact apical and palatal bone to achieve primary stability using the motor and manual torque wrench which was set to be at least 35 N cm to allow nonfunctional immediate loading. The implant platform was located 1.5 mm subcrestal or equicrestal to the labial bone and the implant diameter was selected to leave a labial gap of at least 1.5 mm. Following implant placement, patients received an immediate anatomical customized healing abutment fabricated by adding flowable composite to the temporary cylindrical abutment mimicking the shape of the socket at the marginal gingiva (Filtek™ Supreme Ultra Flowable Restorative, 3M Corporate Headquarters, MN, USA). It was then screwed to the implant

Menettely: IIP +CHA only

A tapered screw-vent bone level implant (Zimmer implant TSV, IN, USA) was inserted into the extraction socket in a flapless manner, engaging 3-4 mm of the sound intact apical and palatal bone to achieve primary stability using the motor and manual torque wrench which was set to be at least 35 N cm to allow nonfunctional immediate loading. The implant platform was located 1.5 mm subcrestal or equicrestal to the labial bone and the implant diameter was selected to leave a labial gap of at least 1.5 mm. Following implant placement, randomization sequence with allocation to either graft or no graft group was revealed. For patients assigned to receive no graft an immediate anatomical customized healing abutment fabricated by adding flowable composite to the temporary cylindrical abutment mimicking the mimicking the shape of the socket at the marginal gingiva was screwed to the implant

Mitä tutkimuksessa mitataan?

Ensisijaiset tulostoimenpiteet

Tulosmittaus	Toimenpiteen kuvaus	Aikaikkuna
Labial bone formed labial to the implant Aikaikkuna: 5 years follow up	Measure using the CBCT, the amount of bone formed labial to the implant	5 years follow up

Yhteistyökumppanit ja tutkijat

Täältä löydät tähän tutkimukseen osallistuvat ihmiset ja organisaatiot.

Sponsori

International Dental Contiuing Education

Opintojen ennätyspäivät

Nämä päivämäärät seuraavat ClinicalTrials.gov-sivustolle lähetettyjen tutkimustietueiden ja yhteenvetojen edistymistä. National Library of Medicine (NLM) tarkistaa tutkimustiedot ja raportoidut tulokset varmistaakseen, että ne täyttävät tietyt laadunvalvontastandardit, ennen kuin ne julkaistaan julkisella verkkosivustolla.

Opi tärkeimmät päivämäärät

Opiskelun aloitus (Arvioitu)

Torstai 1. lokakuuta 2026

Ensisijainen valmistuminen (Arvioitu)

Sunnuntai 1. marraskuuta 2026

Opintojen valmistuminen (Arvioitu)

Tiistai 1. joulukuuta 2026

Opintoihin ilmoittautumispäivät

Ensimmäinen lähetetty

Perjantai 4. syyskuuta 2026

Ensimmäinen toimitettu, joka täytti QC-kriteerit

Perjantai 4. syyskuuta 2026

Ensimmäinen Lähetetty (Todellinen)

Torstai 10. syyskuuta 2026

Tutkimustietojen päivitykset

Viimeisin päivitys julkaistu (Todellinen)

Torstai 10. syyskuuta 2026

Viimeisin lähetetty päivitys, joka täytti QC-kriteerit

Perjantai 4. syyskuuta 2026

Viimeksi vahvistettu

Tiistai 1. syyskuuta 2026

Lisää tietoa

Tähän tutkimukseen liittyvät termit

Avainsanat

Muut tutkimustunnusnumerot

IDCE-4292026

Yksittäisten osallistujien tietojen suunnitelma (IPD)

Aiotko jakaa yksittäisten osallistujien tietoja (IPD)?

Lääke- ja laitetiedot, tutkimusasiakirjat

Tutkii yhdysvaltalaista FDA sääntelemää lääkevalmistetta

Tutkii yhdysvaltalaista FDA sääntelemää laitetuotetta

Nämä tiedot haettiin suoraan verkkosivustolta clinicaltrials.gov ilman muutoksia. Jos sinulla on pyyntöjä muuttaa, poistaa tai päivittää tutkimustietojasi, ota yhteyttä register@clinicaltrials.gov. Heti kun muutos on otettu käyttöön osoitteessa clinicaltrials.gov, se päivitetään automaattisesti myös verkkosivustollemme .

Long-Term Bone Dimensional Changes Following Flapless Immediate Implant Placement