Long-Term Bone Dimensional Changes Following Flapless Immediate Implant Placement
4 septembre 2026 mis à jour par: International Dental Contiuing Education
Long-Term Bone Dimensional Changes Following Flapless Immediate Implant Placement With or Without Bone Grafting: A 5 Years Follow up of a Randomized Clinical Trial
Nowadays, achieving long-term hard tissue stability is the definitive goal of a successful immediate implant placement and has become the optimal challenge for clinicians over the past few decades.
It is wellestablished that the dimensional changes and remodeling of the alveolar ridge represent a physiologic sequela of tooth extraction and is inevitable especially the labial bone wall.
This creates an unfavorable labio-palatal discrepancy and produces the "fixture-socket gap" around the coronal portion of the implant, known as the labial gap especially in sockets with thin bone.Although this gap has the potential to repair spontaneously in some cases, still previous studies reported that this gap cannot be completely filled without using a regenerative material.
It has been claimed that buccal/labial gap augmentation contributes to the final esthetic success of the dental implant, where the regenerative material acts as a scaffold to maintain the blood clot, promote bone formation, compensate for the postextraction socket remodeling and maintain the buccal bone thickness and thereby preventing the buccal contour collapse.
Nevertheless, this would add an additional cost and prolong the surgical procedure.
Meanwhile, there is a controversy in the existing literature regarding the actual benefit of using bone grafts in the buccal gap.
Previous systematic reviews concluded that there is not sufficient evidence to prove that immediate implant placement with grafting the labial gap, would comprise an additional benefit in preventing alveolar ridge reduction and contour collapse.
Furthermore, previous controlled clinical trials reported that evidence for this additional treatment is still unclear.
Aperçu de l'étude
Statut
Pas encore de recrutement
Les conditions
Intervention / Traitement
Description détaillée
Patients who completed the initial trial and received a single immediate implant in a fresh extraction socket would be invited for reassessment at 5 years after implant placement.
The intervention group would comprise patients treated with flapless immediate implant placement combined with grafting of the peri-implant gap using the same bone-substitute material and protocol applied in the original study, while the control group would comprise patients treated with flapless immediate implant placement without bone grafting.
The primary outcome would be the change in peri-implant marginal bone level and three-dimensional alveolar ridge dimensions, assessed by standardized periapical radiographs and, where ethically and clinically justified, limited-field cone-beam computed tomography, compared with baseline and the earlier follow-up measurements.
Secondary outcomes would include implant survival and success, peri-implant probing depth, bleeding on probing, plaque accumulation, mucosal recession, width of keratinized mucosa, facial soft-tissue profile, biological complications, prosthetic complications, patient satisfaction, and esthetic outcomes.
Assessments should be performed by calibrated, blinded examiners using standardized imaging and clinical protocols.
The study would analyze all eligible participants according to their original randomized allocation, report reasons for loss to follow-up, and compare the long-term dimensional stability and clinical performance of grafted versus nongrafted sites.
The principal hypothesis would be that bone grafting may reduce long-term horizontal ridge resorption and improve preservation of the facial contour without adversely affecting implant survival or peri-implant health over the 5-year observation period.
Type d'étude
Interventionnel
Inscription (Estimé)
40
Phase
- N'est pas applicable
Contacts et emplacements
Cette section fournit les coordonnées de ceux qui mènent l'étude et des informations sur le lieu où cette étude est menée.
Lieux d'étude
-
-
-
Cairo, Egypte
- International Dental Continuing Education (IDCE) Research Institute
-
-
Critères de participation
Les chercheurs recherchent des personnes qui correspondent à une certaine description, appelée critères d'éligibilité. Certains exemples de ces critères sont l'état de santé général d'une personne ou des traitements antérieurs.
Critère d'éligibilité
Âges éligibles pour étudier
- Adulte
Accepte les volontaires sains
Non
La description
Inclusion Criteria:
- Adult (>20 years) with nonrestorable maxillary teeth in the esthetic zone, thick gingival phenotype, intact but thin labial plate of bone extending 7 mm (≤1 mm) and intact palatal bone extending at least 6 mm apically, sufficient apical bone to attain implant primary stability (a minimum of 35 N cm insertion torque) and labio-palatal socket dimension measured from the CBCT axial cut at mid-crestal part ≥5 mm.
Exclusion Criteria:
- Smokers, pregnant women, patients with systemic disease, patients with parafunctional habits such as bruxism or clenching, infected socket, periapical pathosis and history of radiotherapy or chemotherapy within the past 2 years.
Plan d'étude
Cette section fournit des détails sur le plan d'étude, y compris la façon dont l'étude est conçue et ce que l'étude mesure.
Comment l'étude est-elle conçue ?
Détails de conception
- Objectif principal: Autre
- Répartition: Randomisé
- Modèle interventionnel: Affectation parallèle
- Masquage: Seul
Armes et Interventions
Groupe de participants / Bras |
Intervention / Traitement |
|---|---|
|
Comparateur actif: IIP + Bone graft + CHA
For patients assigned to receive a graft, demineralized bovine bone graft (Bio-Oss, Geistlich Pharma AG, Wolhusen, Switzerland) was placed in the gap labial to the implant to the level of the implant platform.
|
A tapered screw-vent bone level implant (Zimmer implant TSV, IN, USA) was inserted into the extraction socket in a flapless manner, engaging 3-4 mm of the sound intact apical and palatal bone to achieve primary stability using the motor and manual torque wrench which was set to be at least 35 N cm to allow nonfunctional immediate loading.
The implant platform was located 1.5 mm subcrestal or equicrestal to the labial bone and the implant diameter was selected to leave a labial gap of at least 1.5 mm.
Following implant placement, randomization sequence with allocation to either graft or no graft group was revealed.
For patients assigned to receive a graft, demineralized bovine bone graft (Bio-Oss, Geistlich Pharma AG, Wolhusen, Switzerland) was placed in the gap labial to the implant to the level of the implant platform.
|
|
Expérimental: IIP + CHA only
A tapered screw-vent bone level implant (Zimmer implant TSV, IN, USA) was inserted into the extraction socket in a flapless manner, engaging mm of the sound intact apical and palatal bone to achieve primary stability using the motor and manual torque wrench which was set to be at least 35 N cm to allow nonfunctional immediate loading.
The implant platform was located 1.5 mm subcrestal or equicrestal to the labial bone and the implant diameter was selected to leave a labial gap of at least 1.5 mm.
Following implant placement, patients received an immediate anatomical customized healing abutment fabricated by adding flowable composite to the temporary cylindrical abutment mimicking the shape of the socket at the marginal gingiva (Filtek™ Supreme Ultra Flowable Restorative, 3M Corporate Headquarters, MN, USA).
It was then screwed to the implant
|
A tapered screw-vent bone level implant (Zimmer implant TSV, IN, USA) was inserted into the extraction socket in a flapless manner, engaging 3-4 mm of the sound intact apical and palatal bone to achieve primary stability using the motor and manual torque wrench which was set to be at least 35 N cm to allow nonfunctional immediate loading.
The implant platform was located 1.5 mm subcrestal or equicrestal to the labial bone and the implant diameter was selected to leave a labial gap of at least 1.5 mm.
Following implant placement, randomization sequence with allocation to either graft or no graft group was revealed.
For patients assigned to receive no graft an immediate anatomical customized healing abutment fabricated by adding flowable composite to the temporary cylindrical abutment mimicking the mimicking the shape of the socket at the marginal gingiva was screwed to the implant
|
Que mesure l'étude ?
Principaux critères de jugement
Mesure des résultats |
Description de la mesure |
Délai |
|---|---|---|
|
Labial bone formed labial to the implant
Délai: 5 years follow up
|
Measure using the CBCT, the amount of bone formed labial to the implant
|
5 years follow up
|
Collaborateurs et enquêteurs
C'est ici que vous trouverez les personnes et les organisations impliquées dans cette étude.
Parrainer
Dates d'enregistrement des études
Ces dates suivent la progression des dossiers d'étude et des soumissions de résultats sommaires à ClinicalTrials.gov. Les dossiers d'étude et les résultats rapportés sont examinés par la Bibliothèque nationale de médecine (NLM) pour s'assurer qu'ils répondent à des normes de contrôle de qualité spécifiques avant d'être publiés sur le site Web public.
Dates principales de l'étude
Début de l'étude (Estimé)
1 octobre 2026
Achèvement primaire (Estimé)
1 novembre 2026
Achèvement de l'étude (Estimé)
1 décembre 2026
Dates d'inscription aux études
Première soumission
4 septembre 2026
Première soumission répondant aux critères de contrôle qualité
4 septembre 2026
Première publication (Réel)
10 septembre 2026
Mises à jour des dossiers d'étude
Dernière mise à jour publiée (Réel)
10 septembre 2026
Dernière mise à jour soumise répondant aux critères de contrôle qualité
4 septembre 2026
Dernière vérification
1 septembre 2026
Plus d'information
Termes liés à cette étude
Mots clés
Autres numéros d'identification d'étude
- IDCE-4292026
Plan pour les données individuelles des participants (IPD)
Prévoyez-vous de partager les données individuelles des participants (DPI) ?
NON
Informations sur les médicaments et les dispositifs, documents d'étude
Étudie un produit pharmaceutique réglementé par la FDA américaine
Non
Étudie un produit d'appareil réglementé par la FDA américaine
Non
Ces informations ont été extraites directement du site Web clinicaltrials.gov sans aucune modification. Si vous avez des demandes de modification, de suppression ou de mise à jour des détails de votre étude, veuillez contacter register@clinicaltrials.gov. Dès qu'un changement est mis en œuvre sur clinicaltrials.gov, il sera également mis à jour automatiquement sur notre site Web .