此页面是自动翻译的,不保证翻译的准确性。请参阅 英文版 对于源文本。

Comparison of Maxillary Canine Retraction Rate With and Without Power Arm

2026年9月22日 更新者:Tanzila Rafique

Comparison of Maxillary Canine Retraction Rate With and Without Power Arm: A Split-Mouth Randomized Control Trial

The goal of this split-mouth randomized clinical trial is to compare maxillary canine retraction with and without power arm during fixed orthodontic treatment.The main question it aims to answer is What are the differences in the rate of maxillary canine retraction between the power- arm technique and the direct sliding technique over a 6-month period time?

研究概览

详细说明

Researchers will compare a power arm placed in the vertical slot of the canine bracket with elastomeric chain to a mini-screw (experimental/PAS) against a conventional elastomeric chain from the canine bracket directly to a mini-screw (control/DS) during canine retraction phase.

Participants will:

  • undergo bilateral maxillary first premolar extractions, followed by placement of a titanium mini-screw or TAD (Vector TAS, 1.4×8.0 mm) between second premolar and first molar on each side for anchorage.
  • receive fixed orthodontic treatment using a pre-adjusted edgewise appliance system (Roth, 0.018-inch slot).
  • have levelling and alignment carried out using a graduated arch-wire sequence (0.014-inch, 0.016-inch, 0.016×0.016-inch, 0.016×0.022-inch, and 0.017×0.025-inch), with angulation corrections addressed at this stage.
  • have bilateral canine retraction initiated three months post-extraction on a 0.016×0.022-inch stainless steel arch-wire, with an elastomeric chain attaching from the power arm to the mini-screw on the experimental (PAS) side and directly from the canine bracket to the mini-screw on the control (DS) side, under a standardized force of 150g reactivated every 21 days.
  • be evaluated via CBCT at baseline (T0) and at 3 and 6 months (T1, T2) to measure canine retraction rate and angulation change on both sides

研究类型

介入性

注册 (估计的)

28

阶段

  • 不适用

联系人和位置

本节提供了进行研究的人员的详细联系信息,以及有关进行该研究的地点的信息。

学习地点

      • Dhaka、孟加拉国、1215
        • Bangladesh Medical University (BMU), Dhaka,1000

参与标准

研究人员寻找符合特定描述的人,称为资格标准。这些标准的一些例子是一个人的一般健康状况或先前的治疗。

资格标准

适合学习的年龄

18年 至 25年 (成人)

接受健康志愿者

是的

有资格学习的性别

全部

描述

Inclusion Criteria:

  • Participant with Angle's class I and class II malocclusion who required both maxillary bilateral premolar extraction for orthodontic treatment.
  • Participants who required maximum anchorage.
  • Participants with good general health condition and oral hygiene status.
  • Age range of the participants will be 18 to 25 years.
  • Sex of the participants will be both male and female.
  • Participants with full permanent dentition present (excluding 3 rd molar).
  • Participants who have completed the levelling and alignment phase before the start of canine retraction.
  • Participants with no caries, fracture, periapical lesion, root resorption, morphological variation or other pathology involving the maxillary canine.

Exclusion Criteria:

  • Participants with systemic conditions affecting bone metabolism or orthodontic tooth movement (e.g., diabetes mellitus, osteoporosis).
  • Participants with impacted or displaced maxillary canines.
  • Participants with retained deciduous canines.
  • Participants with dental anomalies affecting canine retraction.
  • Participants with previous orthodontic treatment.
  • Participants with cleft lip/palate, craniofacial syndromes, or facial asymmetry.
  • Participants requiring surgical orthodontic treatment.
  • Pregnant women.
  • Participants with poor cooperation, missed appointments, or frequent appliance breakage.
  • Habit of smoking.

学习计划

本节提供研究计划的详细信息,包括研究的设计方式和研究的衡量标准。

研究是如何设计的?

设计细节

  • 主要用途:治疗
  • 分配:随机化
  • 介入模型:并行分配
  • 屏蔽:无(打开标签)

武器和干预

参与者组/臂
干预/治疗
实验性的:Power Arm sliding technique

Experimental: Power Arm sliding techniqueA power arm placed in the vertical slot of the canine bracket and elastomeric chain attached from power arm to mini-screw.

Experimental: Power Arm sliding technique: A power arm placed in the vertical slot of the canine bracket and elastomeric chain attached from power arm to mini-screw.

Active Comparator / Control: direct sliding technique:

Elastomeric chain applied directly from the canine bracket to a mini-screw on the contralateral side.

其他名称:
  • Experimental: Power Arm sliding technique
  • Active Comparator / Control: direct sliding technique
有源比较器:Control: direct sliding technique

Active Comparator / Control: direct sliding technique: Elastomeric chain applied directly from the canine bracket to a mini-screw on the contralateral side.

Experimental: Power Arm sliding technique: A power arm placed in the vertical slot of the canine bracket and elastomeric chain attached from power arm to mini-screw.

Active Comparator / Control: direct sliding technique:

Elastomeric chain applied directly from the canine bracket to a mini-screw on the contralateral side.

其他名称:
  • Experimental: Power Arm sliding technique
  • Active Comparator / Control: direct sliding technique

研究衡量的是什么?

主要结果指标

结果测量
措施说明
大体时间
Primary outcome measure
大体时间:6 months

This split-mouth randomized clinical trial will compare maxillary canine retraction (in mm) with and without a power arm during fixed orthodontic treatment.

6 months

次要结果测量

结果测量
措施说明
大体时间
Secondary outcome measures
大体时间:6 months
  • Participants will receive fixed orthodontic treatment using a pre-adjusted edgewise appliance system (Roth, 0.018-inch slot).
  • Bilateral maxillary first premolar extractions will be done followed by placement of a titanium mini-screw or TAD (Vector TAS, 1.4×8.0 mm) between the second premolar and first molar on each side.
  • Levelling and alignment will be carriedout using a graduated arch-wire sequence (0.014-inch, 0.016-inch, 0.016×0.016-inch, 0.016×0.022-inch, and 0.017×0.025-inch).
  • Bilateral canine retraction will be initiated three months post-extraction on a 0.016×0.022-inch stainless steel arch-wire, with an elastomeric chain attaching from the power arm to the mini-screw on the experimental (PAS) side and directly from the canine bracket to the mini-screw on the control (DS) side, under a force of 150g reactivated every 21 days.
  • Evaluation will be done at 3 and 6 months to measure canine retraction rate (in mm) and angulation changes(in degrees) at both side.
6 months

合作者和调查者

在这里您可以找到参与这项研究的人员和组织。

调查人员

  • 研究主任:Mahmood Sajedeen, BDS,FCPS、Bangladesh Medical University (BMU)
  • 研究主任:Sajedeen、Bangladesh Medical University (BMU), Dhaka-1000

研究记录日期

这些日期跟踪向 ClinicalTrials.gov 提交研究记录和摘要结果的进度。研究记录和报告的结果由国家医学图书馆 (NLM) 审查,以确保它们在发布到公共网站之前符合特定的质量控制标准。

研究主要日期

学习开始 (实际的)

2026年8月18日

初级完成 (估计的)

2027年8月17日

研究完成 (估计的)

2027年8月17日

研究注册日期

首次提交

2026年9月3日

首先提交符合 QC 标准的

2026年9月17日

首次发布 (实际的)

2026年9月23日

研究记录更新

最后更新发布 (实际的)

2026年9月24日

上次提交的符合 QC 标准的更新

2026年9月22日

最后验证

2026年9月1日

更多信息

与本研究相关的术语

计划个人参与者数据 (IPD)

计划共享个人参与者数据 (IPD)?

不

药物和器械信息、研究文件

研究美国 FDA 监管的药品

不

研究美国 FDA 监管的设备产品

不

此信息直接从 clinicaltrials.gov 网站检索,没有任何更改。如果您有任何更改、删除或更新研究详细信息的请求,请联系 register@clinicaltrials.gov. clinicaltrials.gov 上实施更改,我们的网站上也会自动更新.

订阅