Questa pagina è stata tradotta automaticamente e l'accuratezza della traduzione non è garantita. Si prega di fare riferimento al Versione inglese per un testo di partenza.

Comparison of Maxillary Canine Retraction Rate With and Without Power Arm

22 settembre 2026 aggiornato da: Tanzila Rafique

Comparison of Maxillary Canine Retraction Rate With and Without Power Arm: A Split-Mouth Randomized Control Trial

The goal of this split-mouth randomized clinical trial is to compare maxillary canine retraction with and without power arm during fixed orthodontic treatment.The main question it aims to answer is What are the differences in the rate of maxillary canine retraction between the power- arm technique and the direct sliding technique over a 6-month period time?

Panoramica dello studio

Descrizione dettagliata

Researchers will compare a power arm placed in the vertical slot of the canine bracket with elastomeric chain to a mini-screw (experimental/PAS) against a conventional elastomeric chain from the canine bracket directly to a mini-screw (control/DS) during canine retraction phase.

Participants will:

  • undergo bilateral maxillary first premolar extractions, followed by placement of a titanium mini-screw or TAD (Vector TAS, 1.4×8.0 mm) between second premolar and first molar on each side for anchorage.
  • receive fixed orthodontic treatment using a pre-adjusted edgewise appliance system (Roth, 0.018-inch slot).
  • have levelling and alignment carried out using a graduated arch-wire sequence (0.014-inch, 0.016-inch, 0.016×0.016-inch, 0.016×0.022-inch, and 0.017×0.025-inch), with angulation corrections addressed at this stage.
  • have bilateral canine retraction initiated three months post-extraction on a 0.016×0.022-inch stainless steel arch-wire, with an elastomeric chain attaching from the power arm to the mini-screw on the experimental (PAS) side and directly from the canine bracket to the mini-screw on the control (DS) side, under a standardized force of 150g reactivated every 21 days.
  • be evaluated via CBCT at baseline (T0) and at 3 and 6 months (T1, T2) to measure canine retraction rate and angulation change on both sides

Tipo di studio

Interventistico

Iscrizione (Stimato)

28

Fase

  • Non applicabile

Contatti e Sedi

Questa sezione fornisce i recapiti di coloro che conducono lo studio e informazioni su dove viene condotto lo studio.

Luoghi di studio

      • Dhaka, Bangladesh, 1215
        • Bangladesh Medical University (BMU), Dhaka,1000

Criteri di partecipazione

I ricercatori cercano persone che corrispondano a una certa descrizione, chiamata criteri di ammissibilità. Alcuni esempi di questi criteri sono le condizioni generali di salute di una persona o trattamenti precedenti.

Criteri di ammissibilità

Età idonea allo studio

Da 18 anni a 25 anni (Adulto)

Accetta volontari sani

Sì

Sessi ammissibili allo studio

Tutto

Descrizione

Inclusion Criteria:

  • Participant with Angle's class I and class II malocclusion who required both maxillary bilateral premolar extraction for orthodontic treatment.
  • Participants who required maximum anchorage.
  • Participants with good general health condition and oral hygiene status.
  • Age range of the participants will be 18 to 25 years.
  • Sex of the participants will be both male and female.
  • Participants with full permanent dentition present (excluding 3 rd molar).
  • Participants who have completed the levelling and alignment phase before the start of canine retraction.
  • Participants with no caries, fracture, periapical lesion, root resorption, morphological variation or other pathology involving the maxillary canine.

Exclusion Criteria:

  • Participants with systemic conditions affecting bone metabolism or orthodontic tooth movement (e.g., diabetes mellitus, osteoporosis).
  • Participants with impacted or displaced maxillary canines.
  • Participants with retained deciduous canines.
  • Participants with dental anomalies affecting canine retraction.
  • Participants with previous orthodontic treatment.
  • Participants with cleft lip/palate, craniofacial syndromes, or facial asymmetry.
  • Participants requiring surgical orthodontic treatment.
  • Pregnant women.
  • Participants with poor cooperation, missed appointments, or frequent appliance breakage.
  • Habit of smoking.

Piano di studio

Questa sezione fornisce i dettagli del piano di studio, compreso il modo in cui lo studio è progettato e ciò che lo studio sta misurando.

Come è strutturato lo studio?

Dettagli di progettazione

  • Scopo principale: Trattamento
  • Assegnazione: Randomizzato
  • Modello interventistico: Assegnazione parallela
  • Mascheramento: Nessuno (etichetta aperta)

Armi e interventi

Gruppo di partecipanti / Arm
Intervento / Trattamento
Sperimentale: Power Arm sliding technique

Experimental: Power Arm sliding techniqueA power arm placed in the vertical slot of the canine bracket and elastomeric chain attached from power arm to mini-screw.

Experimental: Power Arm sliding technique: A power arm placed in the vertical slot of the canine bracket and elastomeric chain attached from power arm to mini-screw.

Active Comparator / Control: direct sliding technique:

Elastomeric chain applied directly from the canine bracket to a mini-screw on the contralateral side.

Altri nomi:
  • Experimental: Power Arm sliding technique
  • Active Comparator / Control: direct sliding technique
Comparatore attivo: Control: direct sliding technique

Active Comparator / Control: direct sliding technique: Elastomeric chain applied directly from the canine bracket to a mini-screw on the contralateral side.

Experimental: Power Arm sliding technique: A power arm placed in the vertical slot of the canine bracket and elastomeric chain attached from power arm to mini-screw.

Active Comparator / Control: direct sliding technique:

Elastomeric chain applied directly from the canine bracket to a mini-screw on the contralateral side.

Altri nomi:
  • Experimental: Power Arm sliding technique
  • Active Comparator / Control: direct sliding technique

Cosa sta misurando lo studio?

Misure di risultato primarie

Misura del risultato
Misura Descrizione
Lasso di tempo
Primary outcome measure
Lasso di tempo: 6 months

This split-mouth randomized clinical trial will compare maxillary canine retraction (in mm) with and without a power arm during fixed orthodontic treatment.

6 months

Misure di risultato secondarie

Misura del risultato
Misura Descrizione
Lasso di tempo
Secondary outcome measures
Lasso di tempo: 6 months
  • Participants will receive fixed orthodontic treatment using a pre-adjusted edgewise appliance system (Roth, 0.018-inch slot).
  • Bilateral maxillary first premolar extractions will be done followed by placement of a titanium mini-screw or TAD (Vector TAS, 1.4×8.0 mm) between the second premolar and first molar on each side.
  • Levelling and alignment will be carriedout using a graduated arch-wire sequence (0.014-inch, 0.016-inch, 0.016×0.016-inch, 0.016×0.022-inch, and 0.017×0.025-inch).
  • Bilateral canine retraction will be initiated three months post-extraction on a 0.016×0.022-inch stainless steel arch-wire, with an elastomeric chain attaching from the power arm to the mini-screw on the experimental (PAS) side and directly from the canine bracket to the mini-screw on the control (DS) side, under a force of 150g reactivated every 21 days.
  • Evaluation will be done at 3 and 6 months to measure canine retraction rate (in mm) and angulation changes(in degrees) at both side.
6 months

Collaboratori e investigatori

Qui è dove troverai le persone e le organizzazioni coinvolte in questo studio.

Sponsor

Investigatori

  • Direttore dello studio: Mahmood Sajedeen, BDS,FCPS, Bangladesh Medical University (BMU)
  • Direttore dello studio: Sajedeen, Bangladesh Medical University (BMU), Dhaka-1000

Studiare le date dei record

Queste date tengono traccia dell'avanzamento della registrazione dello studio e dell'invio dei risultati di sintesi a ClinicalTrials.gov. I record degli studi e i risultati riportati vengono esaminati dalla National Library of Medicine (NLM) per assicurarsi che soddisfino specifici standard di controllo della qualità prima di essere pubblicati sul sito Web pubblico.

Studia le date principali

Inizio studio (Effettivo)

18 agosto 2026

Completamento primario (Stimato)

17 agosto 2027

Completamento dello studio (Stimato)

17 agosto 2027

Date di iscrizione allo studio

Primo inviato

3 settembre 2026

Primo inviato che soddisfa i criteri di controllo qualità

17 settembre 2026

Primo Inserito (Effettivo)

23 settembre 2026

Aggiornamenti dei record di studio

Ultimo aggiornamento pubblicato (Effettivo)

24 settembre 2026

Ultimo aggiornamento inviato che soddisfa i criteri QC

22 settembre 2026

Ultimo verificato

1 settembre 2026

Maggiori informazioni

Termini relativi a questo studio

Altri numeri di identificazione dello studio

  • BMU/2026/8639

Piano per i dati dei singoli partecipanti (IPD)

Hai intenzione di condividere i dati dei singoli partecipanti (IPD)?

NO

Informazioni su farmaci e dispositivi, documenti di studio

Studia un prodotto farmaceutico regolamentato dalla FDA degli Stati Uniti

No

Studia un dispositivo regolamentato dalla FDA degli Stati Uniti

No

Queste informazioni sono state recuperate direttamente dal sito web clinicaltrials.gov senza alcuna modifica. In caso di richieste di modifica, rimozione o aggiornamento dei dettagli dello studio, contattare register@clinicaltrials.gov. Non appena verrà implementata una modifica su clinicaltrials.gov, questa verrà aggiornata automaticamente anche sul nostro sito web .

Sottoscrivi