Effect of Manual Wheelchair Propulsion Workload on Speed, Energy Expenditure, and Propulsion Mechanics
Relationship Among Manual Wheelchair Workload, Speed, Energy Expenditure, and Propulsion Mechanics
The first purpose of this study is to characterize the relationship among propulsion workload, self-selected propulsion speed, and propulsion kinetics/kinematics.
The second purpose is to assess the between days repeatability/reliability of the above outcomes.
There are no hypothesis
This is a repeated measures clinical trial. All participants will complete the following: 1) Acclimation to propelling a manual wheelchair on a wheelchair ergometer; 2) Graded exercise test on the wheelchair ergometer to 80% of age adjusted estimated maximal heart rate; and 3) N=20 one minute propulsion bouts on the wheelchair ergometer.
Tutkimuksen yleiskatsaus
Tila
Ehdot
Interventio / Hoito
Yksityiskohtainen kuvaus
Participants will complete two visits in a 14 day period. Visit 1 will require 3-4 hours. Visit 2 will require 2-3 hours.
During visit 1 participant will complete: 1) Acclimation to propelling a manual wheelchair on a wheelchair ergometer; 2) Graded exercise test on the wheelchair ergometer to 80% of age adjusted estimated maximal heart rate; and 3) N=20 one minute propulsion bouts on the wheelchair ergometer.
During visit 2 participants will repeat the N=20 one minute propulsion bouts on the wheelchair ergometer.
Wheelchair ergometer propulsion acclimation: Participants will complete a minimum of 2 minutes of wheelchair propulsion to acclimate. Additional propulsion time will be completed as needed. Propulsion workload will be varied during the acclimation. Acclimation propulsion may be repeated as needed during study participation.
Submaximal wheelchair ergometer test protocol: Participants will rest quietly in the wheelchair for several minutes. After resting, participants will begin propelling at a comfortable speed at a low initial workload. Workload will be increased every minute. Propulsion speed will remain constant across all workloads. Test will end when participants reach 80% of age adjusted estimated maximum heart rate.
Wheelchair propulsion workload assessment: Participants will complete 20 one-minute propulsion bouts at a self-selected speed. Each one minute propulsion bout will be followed by a 2 minute rest period. Each propulsion bout will be at a different workload. After the first 10 propulsion bouts, participants will be provided with an extended rest period (5 to 30 minutes). For each participant, the maximum workload to be tested is based on their estimated maximum workload. Estimate maximum workload is based on the Heart Rate-Workload relationship documented during the submaximal test.
The workloads of the N=20 propulsion bouts will be divided into two groups of N=10 (Group A and Group B). The total workload of each group will be equal. Within each group, workload sequence is fixed and arranged in a non-ascending or descending order. Completion order of the groups will be counterbalanced within sex. Within participants, completion order will be counterbalanced across days
Opintotyyppi
Ilmoittautuminen (Todellinen)
Vaihe
- Ei sovellettavissa
Yhteystiedot ja paikat
Opiskelupaikat
-
-
Alabama
-
Homewood, Alabama, Yhdysvallat, 35209
- UAB/Lakeshore Research Colaborative Building
-
-
Osallistumiskriteerit
Kelpoisuusvaatimukset
Opintokelpoiset iät
Hyväksyy terveitä vapaaehtoisia
Sukupuolet, jotka voivat opiskella
Kuvaus
Inclusion Criteria:
- age 18 years or older
- cleared to participate in physical activity as determined by the Physical Activity Readiness Questionnaire for Everyone (PAR-Q+)
- self-reported ability to propel a manual wheelchair
- not currently disabled
Exclusion Criteria:
- no additional exclusion criteria if otherwise eligible to participate
Opintosuunnitelma
Miten tutkimus on suunniteltu?
Suunnittelun yksityiskohdat
- Ensisijainen käyttötarkoitus: Perustiede
- Jako: Ei käytössä
- Inventiomalli: Yksittäinen ryhmätehtävä
- Naamiointi: Ei mitään (avoin tarra)
Aseet ja interventiot
Osallistujaryhmä / Arm |
Interventio / Hoito |
|---|---|
|
Kokeellinen: Workload conditions to be tested
The intervention is the external workload a participant propels against.
Participants will propel against N=20 different external workloads.External workload will be controlled by the wheelchair ergometer.
|
Participants will complete 20 one-minute manual wheelchair propulsion bouts.
Each one minute propulsion bout will be followed by a 2 minute rest period.
Each propulsion bout will be at a different workload.
After every 10 propulsion bouts, participants will be provided with an extended rest period (5 to 30 minutes).
For each participant, the maximum workload to be tested is based on their estimated maximum workload.
Estimate maximum workload is based on the HR-Workload relationship documented during a prior sub maximal test to 80% of age adjusted maximum heart rate.
|
Mitä tutkimuksessa mitataan?
Ensisijaiset tulostoimenpiteet
Tulosmittaus |
Toimenpiteen kuvaus |
Aikaikkuna |
|---|---|---|
|
Self-Selected Speed (meters per second)
Aikaikkuna: Seconds 20 to 40 of each 1 minute propulsion bout
|
Average linear propulsion speed during each completed propulsion cycle (i.e.
contact+recovery) averaged across all completed propulsion cycles in the specified time frame.
|
Seconds 20 to 40 of each 1 minute propulsion bout
|
|
Average Rolling Resistance (Newtons)
Aikaikkuna: Seconds 20 to 40 of each 1 minute propulsion bout
|
Average rolling resistance during each completed propulsion cycle (i.e.
contact+recovery) averaged across all completed propulsion cycles in the specified time frame.
|
Seconds 20 to 40 of each 1 minute propulsion bout
|
Toissijaiset tulostoimenpiteet
Tulosmittaus |
Toimenpiteen kuvaus |
Aikaikkuna |
|---|---|---|
|
Number of completed propulsion cycles used to generate the outcomes of interest
Aikaikkuna: Seconds 20 to 40 of each 1 minute propulsion bout
|
The number of complete propulsion cycles occurring in the specified time frame.
A complete propulsion cycle is defined as beginning with the onset of contact with the pushrim and ending with the onset of contact of the next propulsion cycle.
A propulsion cycle includes contact and recovery.
|
Seconds 20 to 40 of each 1 minute propulsion bout
|
|
Average resultant force (Newtons)
Aikaikkuna: Seconds 20 to 40 of each 1 minute propulsion bout
|
Average resultant force during the contact phase of each completed propulsion cycle averaged across all completed propulsion cycles in the specified time frame.
|
Seconds 20 to 40 of each 1 minute propulsion bout
|
|
Average rate of rise of resultant force (Newtons per second squared)
Aikaikkuna: Seconds 20 to 40 of each 1 minute propulsion bout
|
Average rate of rise of resultant force during the contact phase of each completed propulsion cycle averaged across all completed propulsion cycles in the specified time frame.
|
Seconds 20 to 40 of each 1 minute propulsion bout
|
|
Average push frequency (pushes per minute)
Aikaikkuna: Seconds 20 to 40 of each 1 minute propulsion bout
|
For the specified time frame, the total number of completed propulsion cycles divided by the time to complete all the propulsion cycles in seconds multiplied by 60 seconds.
|
Seconds 20 to 40 of each 1 minute propulsion bout
|
|
Average push length (Degrees)
Aikaikkuna: Seconds 20 to 40 of each 1 minute propulsion bout
|
The distance over which a propulsive torque is applied to the pushrim during the contact phase of each complete propulsion cycle averaged across all completed propulsion cycles in the specified time frame.
|
Seconds 20 to 40 of each 1 minute propulsion bout
|
|
Average propulsive torque (Newton meter)
Aikaikkuna: Seconds 20 to 40 of each 1 minute propulsion bout
|
Average propulsive torque during the contact phase of each completed propulsion cycle averaged across all completed propulsion cycles in the specified time frame.
|
Seconds 20 to 40 of each 1 minute propulsion bout
|
|
Average push power output (Watts)
Aikaikkuna: Seconds 20 to 40 of each 1 minute propulsion bout
|
Average power during the contact phase of each each completed propulsion cycle averaged across all completed propulsion cycles in the time frame of interest.
Push power output represents the energy the person applies to the pushrim during the contact phase.
|
Seconds 20 to 40 of each 1 minute propulsion bout
|
|
Average total work per push (Joules)
Aikaikkuna: Seconds 20 to 40 of each 1 minute propulsion bout
|
Total work during the contact phase of each completed propulsion cycle averaged across all completed propulsion cycles in the time frame of interest.
|
Seconds 20 to 40 of each 1 minute propulsion bout
|
|
Average external power output (Watts)
Aikaikkuna: Seconds 20 to 40 of each 1 minute propulsion bout
|
Average external power output during the entire propulsion cycle (i.e.
contact and recovery) averaged across all completed propulsion cycles in the specified time frame.
External power output represents the energy expended by the user-wheelchair system.
|
Seconds 20 to 40 of each 1 minute propulsion bout
|
|
Frequency of each unique propulsion pattern
Aikaikkuna: Seconds 20 to 40 of each 1 minute propulsion bout
|
For each complete propulsion cycle during the specified time frame, the recovery pattern will be classified into one of 5 categories: semi-circular, arcing, single loop, double loop, or indeterminate.
The number of cycles and overall percentage in each category will be reported.
Overall percentage is defined as [number of cycles in a category/total number of cycles * 100].
|
Seconds 20 to 40 of each 1 minute propulsion bout
|
Yhteistyökumppanit ja tutkijat
Sponsori
Opintojen ennätyspäivät
Opi tärkeimmät päivämäärät
Opiskelun aloitus (Todellinen)
Ensisijainen valmistuminen (Todellinen)
Opintojen valmistuminen (Todellinen)
Opintoihin ilmoittautumispäivät
Ensimmäinen lähetetty
Ensimmäinen toimitettu, joka täytti QC-kriteerit
Ensimmäinen Lähetetty (Todellinen)
Tutkimustietojen päivitykset
Viimeisin päivitys julkaistu (Todellinen)
Viimeisin lähetetty päivitys, joka täytti QC-kriteerit
Viimeksi vahvistettu
Lisää tietoa
Tähän tutkimukseen liittyvät termit
Avainsanat
Muut tutkimustunnusnumerot
- IRB-300007513
Yksittäisten osallistujien tietojen suunnitelma (IPD)
Aiotko jakaa yksittäisten osallistujien tietoja (IPD)?
Lääke- ja laitetiedot, tutkimusasiakirjat
Tutkii yhdysvaltalaista FDA sääntelemää lääkevalmistetta
Tutkii yhdysvaltalaista FDA sääntelemää laitetuotetta
Nämä tiedot haettiin suoraan verkkosivustolta clinicaltrials.gov ilman muutoksia. Jos sinulla on pyyntöjä muuttaa, poistaa tai päivittää tutkimustietojasi, ota yhteyttä register@clinicaltrials.gov. Heti kun muutos on otettu käyttöön osoitteessa clinicaltrials.gov, se päivitetään automaattisesti myös verkkosivustollemme .