Tämä sivu käännettiin automaattisesti, eikä käännösten tarkkuutta voida taata. Katso englanninkielinen versio lähdetekstiä varten.

The Effectiveness of High-intensity Laser Therapy After Arthroscopic Shoulder Rotator Cuff Repair.

tiistai 28. huhtikuuta 2026 päivittänyt: Istituto Ortopedico Rizzoli

The Effectiveness of High-intensity Laser Therapy After Arthroscopic Shoulder Rotator Cuff Repair. A Randomized Controlled Trial

This randomized controlled trial aims to evaluate the effectiveness of high-intensity laser therapy (HILT) as an adjunct to conventional rehabilitation in patients undergoing arthroscopic rotator cuff repair.

Despite surgical repair, patients frequently experience postoperative pain, limited range of motion, and delayed functional recovery. Conventional physiotherapy represents the standard of care; however, additional strategies may be needed to optimize outcomes. High-intensity laser therapy has been proposed as a non-invasive intervention with potential analgesic and anti-inflammatory effects, but its effectiveness in the postoperative setting remains unclear.

Participants will be randomly allocated to one of two groups: an experimental group receiving HILT in addition to conventional physiotherapy, and a control group receiving sham laser therapy combined with the same rehabilitation program. Both groups will undergo standardized rehabilitation sessions including therapeutic exercise.

The primary outcome is pain intensity, measured using the Visual Analog Scale. Secondary outcomes include shoulder range of motion (active and passive), muscle strength, functional status assessed with the Constant-Murley Score, and patient-reported disability and quality of life measured using the Shoulder Pain and Disability Index and the Quick Disabilities of the Arm, Shoulder and Hand.

Assessments will be conducted at baseline (at the start of rehabilitation), during the intervention period after the fourth (T1), seventh (T2), and tenth (T3) physiotherapy sessions, and at follow-up at 4 months.

Tutkimuksen yleiskatsaus

Tila

Ei vielä rekrytointia

Ehdot

Interventio / Hoito

Opintotyyppi

Interventio

Ilmoittautuminen (Arvioitu)

46

Vaihe

  • Ei sovellettavissa

Yhteystiedot ja paikat

Tässä osiossa on tutkimuksen suorittajien yhteystiedot ja tiedot siitä, missä tämä tutkimus suoritetaan.

Opiskeluyhteys

Opiskelupaikat

  • Italia
      • Bologna, Italia, 40136
        • Istituto Ortopedico Rizzoli

Osallistumiskriteerit

Tutkijat etsivät ihmisiä, jotka sopivat tiettyyn kuvaukseen, jota kutsutaan kelpoisuuskriteereiksi. Joitakin esimerkkejä näistä kriteereistä ovat henkilön yleinen terveydentila tai aiemmat hoidot.

Kelpoisuusvaatimukset

Opintokelpoiset iät

  • Aikuinen
  • Vanhempi Aikuinen

Hyväksyy terveitä vapaaehtoisia

Ei

Kuvaus

Inclusion Criteria:

  • Arthroscopic rotator cuff repair of one shoulder for partial or full-thickness tear
  • Willingness to provide written informed consent
  • Age between 30 and 70 years
  • Pain intensity greater than 40/100 on the Visual Analog Scale

Exclusion Criteria:

  • Psychiatric disorders
  • Cognitive impairment
  • Rheumatic diseases or Fibromyalgia
  • Vascular diseases
  • Neoplastic diseases
  • Infectious diseases
  • Neurological disorders
  • Hemophilia or bleeding diathesis
  • Use of anticoagulant therapy
  • Presence of a pacemaker
  • History of epileptic seizures
  • Pregnancy or breastfeeding
  • Skin lesions or abrasions at the laser application site
  • Known hypersensitivity to laser therapy or photosensitization
  • Use of photosensitizing medications
  • Tattoo in the treatment area
  • Steroid injections in the target area within the previous 2-3 weeks
  • Recent trauma or injury
  • Suspected conditions in which deep tissue heating is contraindicated
  • Use of analgesic or anti-inflammatory medications during the study period
  • Positive status for human immunodeficiency virus infection

Opintosuunnitelma

Tässä osiossa on tietoja tutkimussuunnitelmasta, mukaan lukien kuinka tutkimus on suunniteltu ja mitä tutkimuksella mitataan.

Miten tutkimus on suunniteltu?

Suunnittelun yksityiskohdat

  • Ensisijainen käyttötarkoitus: Hoito
  • Jako: Satunnaistettu
  • Inventiomalli: Rinnakkaistehtävä
  • Naamiointi: Kolminkertaistaa

Aseet ja interventiot

Osallistujaryhmä / Arm
Interventio / Hoito
Kokeellinen: High level laser therapy group

High-intensity laser therapy (HILT) will be administered using the HIRO TT device (ASA s.r.l., Italy), based on a solid-state Nd:YAG laser source with near-infrared emission at a wavelength of 1064 nm.

The treatment protocol consists of 10 sessions delivered on alternate days. Each session will last 60 minutes and will include 15 minutes of laser therapy followed by 45 minutes of conventional physiotherapy.

Laser therapy will be applied to two areas of 10 × 10 cm each, located at the anterolateral and posterior aspects of the shoulder. The treatment will be delivered using a pulsed emission with a frequency of 15 Hz, a total energy of 1000 J, and an energy density of 5 J/cm². The mean power will range between 6 and 10.5 W, with a peak power between 1 and 3 kW, for a total application time of 8 minutes and 30 seconds.
Laite: High intensity laser therapy

High-intensity laser therapy (HILT) will be administered using the HIRO TT device (ASA s.r.l., Italy), based on a solid-state Nd:YAG laser source with near-infrared emission at a wavelength of 1064 nm.

The treatment protocol consists of 10 sessions delivered on alternate days. Each session will last 60 minutes and will include 15 minutes of laser therapy followed by 45 minutes of conventional physiotherapy.

Laser therapy will be applied to two areas of 10 × 10 cm each, located at the anterolateral and posterior aspects of the shoulder. The treatment will be delivered using a pulsed emission with a frequency of 15 Hz, a total energy of 1000 J, and an energy density of 5 J/cm². The mean power will range between 6 and 10.5 W, with a peak power between 1 and 3 kW, for a total application time of 8 minutes and 30 seconds.
Huijausvertailija: Sham laser therapy group

The sham laser intervention will be delivered using the same HIRO TT device and identical treatment procedures as the active HILT group.

The same anatomical areas (two treatment areas of 10 × 10 cm located at the anterolateral and posterior aspects of the shoulder) will be targeted, with identical session duration and patient positioning.

During sham treatment, the device will remain switched on; however, no therapeutic laser emission will be delivered. This approach is intended to ensure participant blinding by replicating the visual and procedural aspects of the active intervention without providing any active therapeutic effect.
Muut: Sham laser therapy

The sham laser intervention will be delivered using the same HIRO TT device and identical treatment procedures as the active HILT group.

The same anatomical areas (two treatment areas of 10 × 10 cm located at the anterolateral and posterior aspects of the shoulder) will be targeted, with identical session duration and patient positioning.

During sham treatment, the device will remain switched on; however, no therapeutic laser emission will be delivered. This approach is intended to ensure participant blinding by replicating the visual and procedural aspects of the active intervention without providing any active therapeutic effect.

Mitä tutkimuksessa mitataan?

Ensisijaiset tulostoimenpiteet

Tulosmittaus
Toimenpiteen kuvaus
Aikaikkuna
Visual Analogue Scale
Aikaikkuna: after 3 weeks
The VAS consists of a 100-mm horizontal line anchored by two descriptors: "no pain" (0 mm) and "worst imaginable pain" (100 mm). Participants will be asked to mark a point on the line corresponding to their perceived level of pain. The score will be determined by measuring the distance in millimeters from the left end of the line to the patient's mark, with higher scores indicating greater pain intensity.
after 3 weeks

Toissijaiset tulostoimenpiteet

Tulosmittaus
Toimenpiteen kuvaus
Aikaikkuna
Visual Analogue Scale
Aikaikkuna: Baseline, after 1 week, after 2 weeks, after 4 months follow-up
The VAS consists of a 100-mm horizontal line anchored by two descriptors: "no pain" (0 mm) and "worst imaginable pain" (100 mm). Participants will be asked to mark a point on the line corresponding to their perceived level of pain. The score will be determined by measuring the distance in millimeters from the left end of the line to the patient's mark, with higher scores indicating greater pain intensity.
Baseline, after 1 week, after 2 weeks, after 4 months follow-up
Passive Range of Motion
Aikaikkuna: Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Passive shoulder range of motion (ROM) will be assessed using a digital goniometer following standardized measurement procedures. Movements evaluated will include shoulder flexion, abduction, internal rotation and external rotation at 90° of abduction, and external rotation at 0° of abduction. Measurements will be performed with the patient in the supine position. For each movement, three repetitions will be recorded and the mean value will be used for analysis. Results will be expressed in degrees.
Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Active Range of Motion
Aikaikkuna: Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Active shoulder range of motion (ROM) will be assessed using a digital goniometer following standardized measurement procedures. Movements evaluated will include shoulder flexion, abduction, and external rotation at 0° of abduction. Measurements will be performed with the patient in a standing position. For each movement, three repetitions will be recorded and the mean value will be used for analysis. Results will be expressed in degrees.
Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Muscle strength: Handheld dynamometer
Aikaikkuna: after 3 weeks and after 4 months follow-up

Shoulder muscle strength will be assessed using a handheld digital dynamometer following standardized and reproducible testing positions. Isometric strength will be measured for shoulder abduction, internal rotation, and external rotation. Internal and external rotation will be evaluated with the patient in a seated position, with the arm at 0° and 90° of abduction in the scapular plane. Shoulder abduction will be assessed with the arm positioned at 45° of abduction.

For each movement, three maximal isometric contractions of 5 seconds will be performed, with 30 seconds of rest between trials. The highest value recorded will be used for analysis. Results will be expressed in kilograms.
after 3 weeks and after 4 months follow-up
Function: Constant-Murley Score
Aikaikkuna: Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Shoulder function will be assessed using the Constant-Murley Score (CMS), a composite scale that evaluates pain, activities of daily living, range of motion, and muscle strength. The total score ranges from 0 to 100, with higher scores indicating better shoulder function.
Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Disability: Shoulder Pain Disability Index
Aikaikkuna: Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Shoulder pain and disability will be assessed using the Shoulder Pain and Disability Index (SPADI), a self-administered questionnaire composed of 13 items divided into two subscales assessing pain and disability. The total score ranges from 0 to 100, with higher scores indicating greater pain and functional impairment.
Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Disability: Quick Disability of the Arm, Shoulder and Hand
Aikaikkuna: Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Upper limb disability will be assessed using the Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH), a self-administered questionnaire composed of 11 items rated on a Likert scale. The total score ranges from 0 to 100, with higher scores indicating greater disability.
Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up

Yhteistyökumppanit ja tutkijat

Täältä löydät tähän tutkimukseen osallistuvat ihmiset ja organisaatiot.

Sponsori

Istituto Ortopedico Rizzoli

Opintojen ennätyspäivät

Nämä päivämäärät seuraavat ClinicalTrials.gov-sivustolle lähetettyjen tutkimustietueiden ja yhteenvetojen edistymistä. National Library of Medicine (NLM) tarkistaa tutkimustiedot ja raportoidut tulokset varmistaakseen, että ne täyttävät tietyt laadunvalvontastandardit, ennen kuin ne julkaistaan ​​julkisella verkkosivustolla.

Opi tärkeimmät päivämäärät

Opiskelun aloitus (Arvioitu)

Tiistai 1. syyskuuta 2026

Ensisijainen valmistuminen (Arvioitu)

Keskiviikko 1. marraskuuta 2028

Opintojen valmistuminen (Arvioitu)

Lauantai 1. syyskuuta 2029

Opintoihin ilmoittautumispäivät

Ensimmäinen lähetetty

Tiistai 28. huhtikuuta 2026

Ensimmäinen toimitettu, joka täytti QC-kriteerit

Tiistai 28. huhtikuuta 2026

Ensimmäinen Lähetetty (Todellinen)

Tiistai 5. toukokuuta 2026

Tutkimustietojen päivitykset

Viimeisin päivitys julkaistu (Todellinen)

Tiistai 5. toukokuuta 2026

Viimeisin lähetetty päivitys, joka täytti QC-kriteerit

Tiistai 28. huhtikuuta 2026

Viimeksi vahvistettu

Keskiviikko 1. huhtikuuta 2026

Lisää tietoa

Tähän tutkimukseen liittyvät termit

Avainsanat

Muita asiaankuuluvia MeSH-ehtoja

Muut tutkimustunnusnumerot

  • LASER_SHOULDER

Lääke- ja laitetiedot, tutkimusasiakirjat

Tutkii yhdysvaltalaista FDA sääntelemää lääkevalmistetta

Ei

Tutkii yhdysvaltalaista FDA sääntelemää laitetuotetta

Ei

Nämä tiedot haettiin suoraan verkkosivustolta clinicaltrials.gov ilman muutoksia. Jos sinulla on pyyntöjä muuttaa, poistaa tai päivittää tutkimustietojasi, ota yhteyttä register@clinicaltrials.gov. Heti kun muutos on otettu käyttöön osoitteessa clinicaltrials.gov, se päivitetään automaattisesti myös verkkosivustollemme .

Tilaa