Denne siden ble automatisk oversatt og nøyaktigheten av oversettelsen er ikke garantert. Vennligst referer til engelsk versjon for en kildetekst.

The Effectiveness of High-intensity Laser Therapy After Arthroscopic Shoulder Rotator Cuff Repair.

28. april 2026 oppdatert av: Istituto Ortopedico Rizzoli

The Effectiveness of High-intensity Laser Therapy After Arthroscopic Shoulder Rotator Cuff Repair. A Randomized Controlled Trial

This randomized controlled trial aims to evaluate the effectiveness of high-intensity laser therapy (HILT) as an adjunct to conventional rehabilitation in patients undergoing arthroscopic rotator cuff repair.

Despite surgical repair, patients frequently experience postoperative pain, limited range of motion, and delayed functional recovery. Conventional physiotherapy represents the standard of care; however, additional strategies may be needed to optimize outcomes. High-intensity laser therapy has been proposed as a non-invasive intervention with potential analgesic and anti-inflammatory effects, but its effectiveness in the postoperative setting remains unclear.

Participants will be randomly allocated to one of two groups: an experimental group receiving HILT in addition to conventional physiotherapy, and a control group receiving sham laser therapy combined with the same rehabilitation program. Both groups will undergo standardized rehabilitation sessions including therapeutic exercise.

The primary outcome is pain intensity, measured using the Visual Analog Scale. Secondary outcomes include shoulder range of motion (active and passive), muscle strength, functional status assessed with the Constant-Murley Score, and patient-reported disability and quality of life measured using the Shoulder Pain and Disability Index and the Quick Disabilities of the Arm, Shoulder and Hand.

Assessments will be conducted at baseline (at the start of rehabilitation), during the intervention period after the fourth (T1), seventh (T2), and tenth (T3) physiotherapy sessions, and at follow-up at 4 months.

Studieoversikt

Status

Har ikke rekruttert ennå

Studietype

Intervensjonell

Registrering (Antatt)

46

Fase

  • Ikke aktuelt

Kontakter og plasseringer

Denne delen inneholder kontaktinformasjon for de som utfører studien, og informasjon om hvor denne studien blir utført.

Studiekontakt

Studiesteder

      • Bologna, Italia, 40136
        • Istituto Ortopedico Rizzoli

Deltakelseskriterier

Forskere ser etter personer som passer til en bestemt beskrivelse, kalt kvalifikasjonskriterier. Noen eksempler på disse kriteriene er en persons generelle helsetilstand eller tidligere behandlinger.

Kvalifikasjonskriterier

Alder som er kvalifisert for studier

  • Voksen
  • Eldre voksen

Tar imot friske frivillige

Nei

Beskrivelse

Inclusion Criteria:

  • Arthroscopic rotator cuff repair of one shoulder for partial or full-thickness tear
  • Willingness to provide written informed consent
  • Age between 30 and 70 years
  • Pain intensity greater than 40/100 on the Visual Analog Scale

Exclusion Criteria:

  • Psychiatric disorders
  • Cognitive impairment
  • Rheumatic diseases or Fibromyalgia
  • Vascular diseases
  • Neoplastic diseases
  • Infectious diseases
  • Neurological disorders
  • Hemophilia or bleeding diathesis
  • Use of anticoagulant therapy
  • Presence of a pacemaker
  • History of epileptic seizures
  • Pregnancy or breastfeeding
  • Skin lesions or abrasions at the laser application site
  • Known hypersensitivity to laser therapy or photosensitization
  • Use of photosensitizing medications
  • Tattoo in the treatment area
  • Steroid injections in the target area within the previous 2-3 weeks
  • Recent trauma or injury
  • Suspected conditions in which deep tissue heating is contraindicated
  • Use of analgesic or anti-inflammatory medications during the study period
  • Positive status for human immunodeficiency virus infection

Studieplan

Denne delen gir detaljer om studieplanen, inkludert hvordan studien er utformet og hva studien måler.

Hvordan er studiet utformet?

Designdetaljer

  • Primært formål: Behandling
  • Tildeling: Randomisert
  • Intervensjonsmodell: Parallell tildeling
  • Masking: Trippel

Våpen og intervensjoner

Deltakergruppe / Arm
Intervensjon / Behandling
Eksperimentell: High level laser therapy group

High-intensity laser therapy (HILT) will be administered using the HIRO TT device (ASA s.r.l., Italy), based on a solid-state Nd:YAG laser source with near-infrared emission at a wavelength of 1064 nm.

The treatment protocol consists of 10 sessions delivered on alternate days. Each session will last 60 minutes and will include 15 minutes of laser therapy followed by 45 minutes of conventional physiotherapy.

Laser therapy will be applied to two areas of 10 × 10 cm each, located at the anterolateral and posterior aspects of the shoulder. The treatment will be delivered using a pulsed emission with a frequency of 15 Hz, a total energy of 1000 J, and an energy density of 5 J/cm². The mean power will range between 6 and 10.5 W, with a peak power between 1 and 3 kW, for a total application time of 8 minutes and 30 seconds.

High-intensity laser therapy (HILT) will be administered using the HIRO TT device (ASA s.r.l., Italy), based on a solid-state Nd:YAG laser source with near-infrared emission at a wavelength of 1064 nm.

The treatment protocol consists of 10 sessions delivered on alternate days. Each session will last 60 minutes and will include 15 minutes of laser therapy followed by 45 minutes of conventional physiotherapy.

Laser therapy will be applied to two areas of 10 × 10 cm each, located at the anterolateral and posterior aspects of the shoulder. The treatment will be delivered using a pulsed emission with a frequency of 15 Hz, a total energy of 1000 J, and an energy density of 5 J/cm². The mean power will range between 6 and 10.5 W, with a peak power between 1 and 3 kW, for a total application time of 8 minutes and 30 seconds.

Sham-komparator: Sham laser therapy group

The sham laser intervention will be delivered using the same HIRO TT device and identical treatment procedures as the active HILT group.

The same anatomical areas (two treatment areas of 10 × 10 cm located at the anterolateral and posterior aspects of the shoulder) will be targeted, with identical session duration and patient positioning.

During sham treatment, the device will remain switched on; however, no therapeutic laser emission will be delivered. This approach is intended to ensure participant blinding by replicating the visual and procedural aspects of the active intervention without providing any active therapeutic effect.

The sham laser intervention will be delivered using the same HIRO TT device and identical treatment procedures as the active HILT group.

The same anatomical areas (two treatment areas of 10 × 10 cm located at the anterolateral and posterior aspects of the shoulder) will be targeted, with identical session duration and patient positioning.

During sham treatment, the device will remain switched on; however, no therapeutic laser emission will be delivered. This approach is intended to ensure participant blinding by replicating the visual and procedural aspects of the active intervention without providing any active therapeutic effect.

Hva måler studien?

Primære resultatmål

Resultatmål
Tiltaksbeskrivelse
Tidsramme
Visual Analogue Scale
Tidsramme: after 3 weeks
The VAS consists of a 100-mm horizontal line anchored by two descriptors: "no pain" (0 mm) and "worst imaginable pain" (100 mm). Participants will be asked to mark a point on the line corresponding to their perceived level of pain. The score will be determined by measuring the distance in millimeters from the left end of the line to the patient's mark, with higher scores indicating greater pain intensity.
after 3 weeks

Sekundære resultatmål

Resultatmål
Tiltaksbeskrivelse
Tidsramme
Visual Analogue Scale
Tidsramme: Baseline, after 1 week, after 2 weeks, after 4 months follow-up
The VAS consists of a 100-mm horizontal line anchored by two descriptors: "no pain" (0 mm) and "worst imaginable pain" (100 mm). Participants will be asked to mark a point on the line corresponding to their perceived level of pain. The score will be determined by measuring the distance in millimeters from the left end of the line to the patient's mark, with higher scores indicating greater pain intensity.
Baseline, after 1 week, after 2 weeks, after 4 months follow-up
Passive Range of Motion
Tidsramme: Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Passive shoulder range of motion (ROM) will be assessed using a digital goniometer following standardized measurement procedures. Movements evaluated will include shoulder flexion, abduction, internal rotation and external rotation at 90° of abduction, and external rotation at 0° of abduction. Measurements will be performed with the patient in the supine position. For each movement, three repetitions will be recorded and the mean value will be used for analysis. Results will be expressed in degrees.
Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Active Range of Motion
Tidsramme: Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Active shoulder range of motion (ROM) will be assessed using a digital goniometer following standardized measurement procedures. Movements evaluated will include shoulder flexion, abduction, and external rotation at 0° of abduction. Measurements will be performed with the patient in a standing position. For each movement, three repetitions will be recorded and the mean value will be used for analysis. Results will be expressed in degrees.
Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Muscle strength: Handheld dynamometer
Tidsramme: after 3 weeks and after 4 months follow-up

Shoulder muscle strength will be assessed using a handheld digital dynamometer following standardized and reproducible testing positions. Isometric strength will be measured for shoulder abduction, internal rotation, and external rotation. Internal and external rotation will be evaluated with the patient in a seated position, with the arm at 0° and 90° of abduction in the scapular plane. Shoulder abduction will be assessed with the arm positioned at 45° of abduction.

For each movement, three maximal isometric contractions of 5 seconds will be performed, with 30 seconds of rest between trials. The highest value recorded will be used for analysis. Results will be expressed in kilograms.

after 3 weeks and after 4 months follow-up
Function: Constant-Murley Score
Tidsramme: Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Shoulder function will be assessed using the Constant-Murley Score (CMS), a composite scale that evaluates pain, activities of daily living, range of motion, and muscle strength. The total score ranges from 0 to 100, with higher scores indicating better shoulder function.
Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Disability: Shoulder Pain Disability Index
Tidsramme: Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Shoulder pain and disability will be assessed using the Shoulder Pain and Disability Index (SPADI), a self-administered questionnaire composed of 13 items divided into two subscales assessing pain and disability. The total score ranges from 0 to 100, with higher scores indicating greater pain and functional impairment.
Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Disability: Quick Disability of the Arm, Shoulder and Hand
Tidsramme: Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up
Upper limb disability will be assessed using the Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH), a self-administered questionnaire composed of 11 items rated on a Likert scale. The total score ranges from 0 to 100, with higher scores indicating greater disability.
Baseline, after 1 week, after 2 weeks, after 3 weeks, after 4 months follow-up

Samarbeidspartnere og etterforskere

Det er her du vil finne personer og organisasjoner som er involvert i denne studien.

Studierekorddatoer

Disse datoene sporer fremdriften for innsending av studieposter og sammendragsresultater til ClinicalTrials.gov. Studieposter og rapporterte resultater gjennomgås av National Library of Medicine (NLM) for å sikre at de oppfyller spesifikke kvalitetskontrollstandarder før de legges ut på det offentlige nettstedet.

Studer hoveddatoer

Studiestart (Antatt)

1. september 2026

Primær fullføring (Antatt)

1. november 2028

Studiet fullført (Antatt)

1. september 2029

Datoer for studieregistrering

Først innsendt

28. april 2026

Først innsendt som oppfylte QC-kriteriene

28. april 2026

Først lagt ut (Faktiske)

5. mai 2026

Oppdateringer av studieposter

Sist oppdatering lagt ut (Faktiske)

5. mai 2026

Siste oppdatering sendt inn som oppfylte QC-kriteriene

28. april 2026

Sist bekreftet

1. april 2026

Mer informasjon

Begreper knyttet til denne studien

Legemiddel- og utstyrsinformasjon, studiedokumenter

Studerer et amerikansk FDA-regulert medikamentprodukt

Nei

Studerer et amerikansk FDA-regulert enhetsprodukt

Nei

Denne informasjonen ble hentet direkte fra nettstedet clinicaltrials.gov uten noen endringer. Hvis du har noen forespørsler om å endre, fjerne eller oppdatere studiedetaljene dine, vennligst kontakt register@clinicaltrials.gov. Så snart en endring er implementert på clinicaltrials.gov, vil denne også bli oppdatert automatisk på nettstedet vårt. .

Abonnere