- ICH GCP
- Yhdysvaltain kliinisten tutkimusten rekisteri
- Kliininen tutkimus NCT07656597
Do Immediate Digital Workflows Increase Patient Value? (ITI PROM RCT)
Do Immediate Digital Workflows Increase Patient Value? A Patient-Reported Outcome Measure-Based Randomized Controlled Trial Comparing Immediate Versus Delayed Digital Posterior Implant Workflows
Tutkimuksen yleiskatsaus
Tila
Ehdot
Yksityiskohtainen kuvaus
Digital implant workflows enable guided surgery, intraoral scanning, and standardized restorative components, and may reduce treatment burden while supporting efficient, patient-centered care. In posterior single-tooth implant rehabilitation, immediate and delayed placement protocols have been extensively evaluated from a biological perspective, but evidence on patient-reported oral health-related quality of life and workflow efficiency remains limited.
The study compares two standardized digital posterior implant rehabilitation pathways that differ in implant placement timing: immediate placement (Type 1C) versus delayed placement (Type 4B). Participants requiring extraction and single implant therapy in posterior premolar or molar sites will be enrolled at two geographically distinct centers. The immediate workflow combines atraumatic extraction and guided implant placement in one surgical session. The delayed workflow includes extraction and ridge preservation as indicated, followed by implant placement after approximately 16 weeks of healing. Both groups will receive guided implant placement with Straumann BLC implants and a screw-retained monolithic zirconia crown according to the protocol.
The primary objective is to compare the overall treatment-related impact on oral health-related quality of life during the active treatment phase using OHIP-14. Key secondary objectives are to compare workflow-related patient experience, objective workflow efficiency, and peri-implant soft tissue contour changes, while monitoring clinical, radiographic, esthetic, implant-related, and prosthetic safety outcomes.
Opintotyyppi
Ilmoittautuminen (Arvioitu)
Vaihe
- Ei sovellettavissa
Yhteystiedot ja paikat
Opiskeluyhteys
- Nimi: PD Dr. Frank Spitznagel, DMD
- Puhelinnumero: +49-211-81-04440
- Sähköposti: frank.spitznagel@med.uni-duesseldorf.de
Opiskelupaikat
-
-
-
Hong Kong, Hong Kong
- The University of Hong Kong Department of Periodontology and Implant Dentistry, Faculty of Dentistry Prince Philip Dental Hospital
-
Ottaa yhteyttä:
- Prof. Melissa Fok, DMD
- Puhelinnumero: +852 2859 0301
- Sähköposti: melfok@hku.hk
-
Päätutkija:
- Prof. Melissa Fok, DMD
-
Alatutkija:
- Prof. George Prof. Pelekos, DMD
-
Alatutkija:
- Dr. Dominic Ho, DMD
-
-
-
-
North Rhine-Westphalia
-
Düsseldorf, North Rhine-Westphalia, Saksa, 40225
- Department of Prosthodontics, Medical Faculty and University Hospital Düsseldorf, Heinrich-Heine-University Düsseldorf, Moorenstraße 5, 40225 Düsseldorf, Germany
-
Ottaa yhteyttä:
- PD Dr. Frank Spitznagel, DMD, PhD
- Puhelinnumero: +49-211-81-04440
- Sähköposti: frank.spitznagel@med.uni-duesseldorf.de
-
Päätutkija:
- PD Dr. Frank Spitznagel, DMD
-
Alatutkija:
- Dr. Patrick Klein, DMD
-
Alatutkija:
- Prof. Dr. Petra Gierthmühlen, DMD
-
-
Osallistumiskriteerit
Kelpoisuusvaatimukset
Opintokelpoiset iät
- Aikuinen
- Vanhempi Aikuinen
Hyväksyy terveitä vapaaehtoisia
Kuvaus
Inclusion Criteria:
- Adults aged 18 years or older.
- Indication for single implant therapy in a posterior premolar or molar extraction site.
- Good oral hygiene with FMPS ≤20%.
- Controlled periodontitis according to protocol definition.
- At least one natural tooth adjacent to the implant site and presence of an antagonist tooth.
- Ability to comply with study procedures and provide written informed consent.
- Adequate bone volume for immediate or delayed placement.
- Extraction site suitable for centrally positioned, prosthetically driven implant placement using straight prosthetic components.
- Ability to achieve 3-4 mm circumferential implant engagement in native bone along the planned implant axis while maintaining safety distance from vital structures.
- For molar sites, septal bone classified as Smith & Tarnow Type A or Type B, including cases requiring closed sinus floor elevation.
- Post-extraction socket presenting as a contained or partially contained defect with at least three relatively intact socket walls and no individual socket wall vertical defect >5 mm.
- No facial soft-tissue dehiscence or mucogingival defect associated with buccal bone dehiscence.
Exclusion Criteria:
• Known or suspected poor compliance, alcohol abuse, or substance abuse.
- Systemic or local contraindications to implant surgery.
- History of head/neck radiotherapy or recent malignancy within 5 years.
- Use of medications affecting bone metabolism.
- Bisphosphonate use within the past 5 years.
- Uncontrolled periodontal disease.
- Heavy smoking (>10 cigarettes/day).
- Pregnancy or lactation.
- Teeth with periapical lesions >5 mm in greatest diameter, or sockets demonstrating a large cortical perforation >5 mm in greatest dimension on CBCT.
Opintosuunnitelma
Miten tutkimus on suunniteltu?
Suunnittelun yksityiskohdat
- Ensisijainen käyttötarkoitus: Hoito
- Jako: Satunnaistettu
- Inventiomalli: Rinnakkaistehtävä
- Naamiointi: Ei mitään (avoin tarra)
Aseet ja interventiot
Osallistujaryhmä / Arm |
Interventio / Hoito |
|---|---|
|
Kokeellinen: Immediate Digital Workflow / Immediate Implant Placement (Type 1C)
Atraumatic tooth extraction and guided implant placement during the same surgical session.
Socket management follows the standardized protocol according to defect morphology.
Implants are sealed without functional loading and restored with a definitive screw-retained monolithic zirconia crown after healing.
|
Participants allocated to the immediate digital workflow will undergo atraumatic extraction of a non-restorable posterior tooth followed by immediate implant placement during the same surgical session.
Implant placement will be performed using a prosthetically driven digital workflow with static guided surgery.
Socket management and sealing of the extraction socket will be performed according to the standardized study protocol and local standard of care.
Definitive prosthetic restoration will be delivered after the planned healing period.
Muut nimet:
|
|
Active Comparator: Delayed Digital Workflow / Delayed Implant Placement (Type 4B)
Tooth extraction with alveolar ridge preservation as required.
Implant placement is performed after approximately 16 weeks of healing using the same surgical and prosthetic protocol.
Definitive restoration is delivered after healing following implant placement.
|
Participants allocated to the delayed digital workflow will undergo atraumatic extraction of a non-restorable posterior tooth followed by alveolar ridge preservation as indicated according to the standardized study protocol and local standard of care.
Implant placement will be performed after approximately 16 weeks of healing using a prosthetically driven digital workflow with static guided surgery.
Definitive prosthetic restoration will be delivered after the planned healing period.
Muut nimet:
|
Mitä tutkimuksessa mitataan?
Ensisijaiset tulostoimenpiteet
Tulosmittaus |
Toimenpiteen kuvaus |
Aikaikkuna |
|---|---|---|
|
Oral health-related quality of life (OHIP) assessed with OHIP-14 Questionnaire: model-based mean OHIP-14 score averaged across the active treatment phase (0-4 months).
Aikaikkuna: Baseline / enrollment (0 months), 7 days after surgical intervention(s), and definitive crown delivery (approximately 4 months); approximately baseline (0 months) through 4-6 months depending on allocation.
|
The primary estimand is the between-group difference in model-based least-squares mean OHIP-14 scores (0-4) averaged across the active treatment phase.
Lower OHIP-14 scores indicate lower treatment-related impact / better oral health-related quality of life.
|
Baseline / enrollment (0 months), 7 days after surgical intervention(s), and definitive crown delivery (approximately 4 months); approximately baseline (0 months) through 4-6 months depending on allocation.
|
Toissijaiset tulostoimenpiteet
Tulosmittaus |
Toimenpiteen kuvaus |
Aikaikkuna |
|---|---|---|
|
Workflow-Related Patient Experience
Aikaikkuna: Crown delivery (Baseline loading 0 months) and 12-months follow-up post loading
|
Overall treatment experience assessed using a Visual Analogue Scale (VAS 0-100) at crown delivery and at 12-months follow-up.
Higher scores indicate greater perceived treatment experience and perceived value of the treatment pathway.
|
Crown delivery (Baseline loading 0 months) and 12-months follow-up post loading
|
|
Workflow Efficiency
Aikaikkuna: Visit 1-4 (0 months - up to 4-6 months).
|
Chairside time (in minutes) per visit and cumulative chairside time (in minutes) from enrollment through crown delivery (Visit 1-4); number of visits and unplanned interventions (measured in time per minutes).
|
Visit 1-4 (0 months - up to 4-6 months).
|
|
Buccal Contour Changes
Aikaikkuna: Visit 1 (Baseline), Visit 2 (+ 2-4 weeks), Visit 3 (+0-4 months), Visit 5 (+4-5 months), Visit 6 (+ 6 Months after loading), Visit 7 (+12 Months after loading)
|
Volumetric region-of-interest shrinkage / contour change derived from serial intraoral scans at protocol-defined visits through from baseline till 12 months after loading
|
Visit 1 (Baseline), Visit 2 (+ 2-4 weeks), Visit 3 (+0-4 months), Visit 5 (+4-5 months), Visit 6 (+ 6 Months after loading), Visit 7 (+12 Months after loading)
|
|
Radiographic Outcomes
Aikaikkuna: Visit 3 (+0-4 months), Visit 5 (+4-5 months), Visit 6 (+ 6 Months after loading), Visit 7 (+12 Months after loading)
|
Marginal bone level changes at implant placement, loading, +6 months, and +12 months post loading (measured in mm); proportion of implants with >1 mm or >2 mm marginal bone loss.
|
Visit 3 (+0-4 months), Visit 5 (+4-5 months), Visit 6 (+ 6 Months after loading), Visit 7 (+12 Months after loading)
|
|
Clinical Soft Tissue Outcomes 1
Aikaikkuna: Visit 1 (Baseline), Visit 3 (+0-4 months), Visit 5 (+4-5 months), Visit 6 (+ 6 Months after loading), Visit 7 (+12 Months after loading)
|
Mid-buccal mucosal level (in mm), keratinized mucosa width (in mm), probing pocket depth (in mm), recession/dehiscence (in mm)
|
Visit 1 (Baseline), Visit 3 (+0-4 months), Visit 5 (+4-5 months), Visit 6 (+ 6 Months after loading), Visit 7 (+12 Months after loading)
|
|
Clinical Soft Tissue Outcome 2
Aikaikkuna: Visit 1 (Baseline), Visit 3 (+0-4 months), Visit 5 (+4-5 months), Visit 6 (+ 6 Months after loading), Visit 7 (+12 Months after loading)
|
Bleeding on probing (in % number of bleeding surfaces/total number of surfaces), Plaque index (in % number of bleeding surfaces/total number of surfaces)
|
Visit 1 (Baseline), Visit 3 (+0-4 months), Visit 5 (+4-5 months), Visit 6 (+ 6 Months after loading), Visit 7 (+12 Months after loading)
|
|
Implant/prosthetic outcomes
Aikaikkuna: Visit 5 (+4-5 months from Baseline), Visit 6 (+ 6 Months after loading), Visit 7 (+12 Months after loading)
|
Implant survival at 6 and 12 months post-loading; technical complications; prosthetic success according to modified United States Public Health (USPHS) criteria.
|
Visit 5 (+4-5 months from Baseline), Visit 6 (+ 6 Months after loading), Visit 7 (+12 Months after loading)
|
|
Pink and White Esthetics
Aikaikkuna: Visit 1 (Baseline), Visit 5 (+4-5 months), Visit 6 (+ 6 Months after loading), Visit 7 (+12 Months after loading)
|
Pink Esthetic Score/ White Esthetic Score (PES/WES); The PES and WES scores allow an objective evaluation of the aesthetics of implant supported single crowns and adjacent soft tissues based on five parameters: PES:
WES:
Each variable will be assessed using a 0-1-2 scoring system; 0 being the lowest, and 2 being the highest value. Hence, the highest possible PES and WES score is 10 each, whereas the highest possible combined PES/WES score is 20 |
Visit 1 (Baseline), Visit 5 (+4-5 months), Visit 6 (+ 6 Months after loading), Visit 7 (+12 Months after loading)
|
|
Clinician-reported outcomes
Aikaikkuna: Visit 2 (+ 2-4 weeks), Visit 3 (+0-4 months), Visit 5 (+4-5 months), Visit 6 (+ 6 Months after loading), Visit 7 (+12 Months after loading)
|
Procedural difficulty and workflow perception assessed using a numeric rating scale (NRS, 0-10) at extraction and implant placement (0 = extremely easy, 10 = extremely difficult)
|
Visit 2 (+ 2-4 weeks), Visit 3 (+0-4 months), Visit 5 (+4-5 months), Visit 6 (+ 6 Months after loading), Visit 7 (+12 Months after loading)
|
|
Implant Accuracy
Aikaikkuna: Visit 3 (+0-4 months)
|
Implant Placement Accuracy.
Planned versus actual implant position including angulation (in degrees), platform deviation (in mm), and apex deviation (in mm).
|
Visit 3 (+0-4 months)
|
Yhteistyökumppanit ja tutkijat
Opintojen ennätyspäivät
Opi tärkeimmät päivämäärät
Opiskelun aloitus (Arvioitu)
Ensisijainen valmistuminen (Arvioitu)
Opintojen valmistuminen (Arvioitu)
Opintoihin ilmoittautumispäivät
Ensimmäinen lähetetty
Ensimmäinen toimitettu, joka täytti QC-kriteerit
Ensimmäinen Lähetetty (Todellinen)
Tutkimustietojen päivitykset
Viimeisin päivitys julkaistu (Todellinen)
Viimeisin lähetetty päivitys, joka täytti QC-kriteerit
Viimeksi vahvistettu
Lisää tietoa
Tähän tutkimukseen liittyvät termit
Avainsanat
Muut tutkimustunnusnumerot
- 2115-2026 (Muu apuraha/rahoitusnumero: ITI - International Team for Implantology)
Yksittäisten osallistujien tietojen suunnitelma (IPD)
Aiotko jakaa yksittäisten osallistujien tietoja (IPD)?
IPD-suunnitelman kuvaus
Lääke- ja laitetiedot, tutkimusasiakirjat
Tutkii yhdysvaltalaista FDA sääntelemää lääkevalmistetta
Tutkii yhdysvaltalaista FDA sääntelemää laitetuotetta
Yhdysvalloissa valmistettu ja sieltä viety tuote
Nämä tiedot haettiin suoraan verkkosivustolta clinicaltrials.gov ilman muutoksia. Jos sinulla on pyyntöjä muuttaa, poistaa tai päivittää tutkimustietojasi, ota yhteyttä register@clinicaltrials.gov. Heti kun muutos on otettu käyttöön osoitteessa clinicaltrials.gov, se päivitetään automaattisesti myös verkkosivustollemme .
Kliiniset tutkimukset Hammasimplantti
-
Kıvanç AkçaHacettepe UniversityValmisSementointi (MeSH:n yksilöllinen tunnus: D002484) | Dental Implant-Abutment Design (MeSH:n yksilöllinen tunnus: D059605) | Kruunu (MeSH yksilöllinen tunnus: D003442) Pinnat | Contour: Crown (MeSH yksilöllinen tunnus: D003442) - hammasimplantti (MeSH yksilöllinen tunnus: D015921) AbutmentTurkki
-
Cairo UniversityEi vielä rekrytointiaDental Cast Digitalisointi
-
Assistance Publique - Hôpitaux de ParisValmisDental Carie; OikomishoitoRanska
-
Hadassah Medical OrganizationTuntematon
-
Federal University of ParaíbaValmis
-
Cairo UniversityTuntematonBlack Stain Dental, Dental Black Stain, Black Stain*, Black Stains, Hammastahrat
Kliiniset tutkimukset Immediate digital posterior implant workflow
-
Menoufia UniversityMansoura UniversityRekrytointi
-
Menoufia UniversityMansoura UniversityValmisHampaaton leukaEgypti