Cette page a été traduite automatiquement et l'exactitude de la traduction n'est pas garantie. Veuillez vous référer au version anglaise pour un texte source.

Palatal Guide Wire for Canine Control During Miniscrew-Supported Distalization (PGWCanine)

2 octobre 2026 mis à jour par: Selim Arici, Atlas University

Effect of a Palatal Guide Wire on Maxillary Canine Displacement During Miniscrew-Supported Distalization: A Split-Mouth Randomized Controlled Trial

When crowded or protruded teeth are treated by removing an upper premolar on each side, the canine (eye tooth) is first moved backward into the space. As it moves, the tooth tends to rotate and tip out of position, and this rotation is one of the hardest movements to correct and most likely to come back later. This study tested a simple addition to the usual treatment: a small passive wire attached to the inner (palate) side of the canine and connected to the back tooth, meant to guide the canine and keep it from rotating, without adding any extra force.

Sixteen adolescents who needed an upper premolar removed on both sides took part. Because each person has two sides, every patient received both approaches at once: on one randomly chosen side the guide wire was added, and the other side was treated the same way but without it, serving as that patient's own comparison. This split-mouth design lets each patient act as their own control.

The canine was moved backward on both sides using the same light spring and a small bone screw for anchorage. The researchers took dental scans at the start and after one, two, and three months and measured how far each canine moved, how much it rotated and tipped, and whether the back tooth drifted forward. The goal was to find out whether the guide wire reduces unwanted rotation and tipping and affects how quickly the canine moves, without weakening the anchorage.

Aperçu de l'étude

Description détaillée

This was a prospective, single-center, split-mouth randomized controlled trial conducted in the Department of Orthodontics, Faculty of Dentistry, Ondokuz Mayıs University. Sixteen patients (12 female, 4 male; mean age 16.6 ± 1.7 years) with Angle Class II division 1 or 2 malocclusion requiring bilateral maxillary first premolar extraction with maximum anchorage were enrolled.

In each patient, the side to receive the guide wire was randomly allocated, balanced so that the guide wire was placed on the right side in 8 patients and on the left in 8. Both canines were distalized with a 150-g nickel-titanium closed coil spring extended from an interradicular miniscrew to a U-shaped power arm seated in the vertical slot of the canine bracket. On the experimental side only, a passive 0.020-inch round stainless steel wire was engaged between a bracket bonded to the palatal surface of the canine and the first molar band sheath; this wire was never activated and added no force to the system.

Alginate impressions were taken at the start of distalization (T0) and after 1 (T1), 2 (T2), and 3 (T3) months. Casts were scanned and superimposed on the medial and lateral limits of the third palatal ruga and the medial limit of the second. Distopalatal rotation, canine distalization, canine tipping, and first molar anchorage loss were measured and compared between the guide wire and control sides using paired statistics on the within-patient difference.

Type d'étude

Interventionnel

Inscription (Réel)

16

Phase

  • N'est pas applicable

Contacts et emplacements

Cette section fournit les coordonnées de ceux qui mènent l'étude et des informations sur le lieu où cette étude est menée.

Lieux d'étude

    • Marmara
      • Samsun, Marmara, Turquie (Türkiye), 55139
        • Ondokuz Mayıs University, Faculty of Dentistry, Department of Orthodontics

Critères de participation

Les chercheurs recherchent des personnes qui correspondent à une certaine description, appelée critères d'éligibilité. Certains exemples de ces critères sont l'état de santé général d'une personne ou des traitements antérieurs.

Critère d'éligibilité

Âges éligibles pour étudier

14 ans à 20 ans (Enfant, Adulte)

Accepte les volontaires sains

Non

Sexes éligibles pour l'étude

Tout

La description

Inclusion Criteria:

  • Angle Class II division 1 or division 2 malocclusion
  • Indication for maxillary first premolar extraction
  • Maximum anchorage requirement
  • Minimal or no maxillary incisor crowding
  • No previous orthodontic treatment
  • No congenitally missing or previously extracted maxillary teeth other than third molars
  • Completed pubertal growth spurt

Exclusion Criteria:

  • Any systemic disease or regular medication use
  • Poor oral hygiene or active periodontal disease

Plan d'étude

Cette section fournit des détails sur le plan d'étude, y compris la façon dont l'étude est conçue et ce que l'étude mesure.

Comment l'étude est-elle conçue ?

Détails de conception

  • Objectif principal: Traitement
  • Répartition: Randomisé
  • Modèle interventionnel: Affectation croisée
  • Masquage: Aucun (étiquette ouverte)

Armes et Interventions

Groupe de participants / Bras
Intervention / Traitement
Expérimental: Guide wire side

The maxillary canine on the randomly allocated side was distalized with a 150-g nickel-titanium closed coil spring from an interradicular miniscrew to a power arm in the vertical slot of the canine bracket, with a passive palatal guide wire engaged between a bracket on the palatal surface of the canine and the first molar band sheath.

A passive 0.020-inch round stainless steel wire engaged between a bracket bonded to the palatal surface of the maxillary canine and the first molar band sheath. The wire was never activated and added no force to the distalization system.

Distalization of the maxillary canine with a 150-g nickel-titanium closed coil spring extended from an interradicular miniscrew to a U-shaped power arm seated in the vertical slot of the canine bracket.

Comparateur actif: Control side

The contralateral canine was distalized with the identical coil-spring and power-arm system, without a palatal guide wire.

Distalization of the maxillary canine with a 150-g nickel-titanium closed coil spring extended from an interradicular miniscrew to a U-shaped power arm seated in the vertical slot of the canine bracket.

Que mesure l'étude ?

Principaux critères de jugement

Mesure des résultats
Description de la mesure
Délai
Cumulative distopalatal rotation of the maxillary canine
Délai: Baseline (T0) and 3 months (T3)

Change from baseline in the angle between the sagittal reference line and a line through the canine cusp tip along the palatal ridge, measured on rugae-superimposed digital models and compared between the guide wire and control sides.

Baseline (T0) and 3 months (T3)
Cumulative canine distalization
Délai: Baseline (T0) and 3 months (T3)

Change from baseline in the perpendicular distance from the canine cusp tip to the sagittal reference line, compared between the guide wire and control sides.

Baseline (T0) and 3 months (T3)

Mesures de résultats secondaires

Mesure des résultats
Description de la mesure
Délai
Canine tipping
Délai: Baseline (T0) and 3 months (T3)

Change from baseline in the disto-occlusal angle of the canine relative to the horizontal reference, compared between sides.

Baseline (T0) and 3 months (T3)
First molar anchorage loss
Délai: Baseline (T0) and 3 months (T3)

Mesial movement of the maxillary first molar, measured from its mesial contact point to the sagittal reference line, compared between sides.

Baseline (T0) and 3 months (T3)
Monthly rate of canine distalization and rotation
Délai: T0, 1 month (T1), 2 months (T2), and 3 months (T3)

Distalization and rotation increments per monthly interval, compared between sides.

T0, 1 month (T1), 2 months (T2), and 3 months (T3)

Collaborateurs et enquêteurs

C'est ici que vous trouverez les personnes et les organisations impliquées dans cette étude.

Parrainer

Dates d'enregistrement des études

Ces dates suivent la progression des dossiers d'étude et des soumissions de résultats sommaires à ClinicalTrials.gov. Les dossiers d'étude et les résultats rapportés sont examinés par la Bibliothèque nationale de médecine (NLM) pour s'assurer qu'ils répondent à des normes de contrôle de qualité spécifiques avant d'être publiés sur le site Web public.

Dates principales de l'étude

Début de l'étude (Réel)

4 mars 2024

Achèvement primaire (Réel)

16 août 2024

Achèvement de l'étude (Réel)

16 août 2024

Dates d'inscription aux études

Première soumission

22 septembre 2026

Première soumission répondant aux critères de contrôle qualité

22 septembre 2026

Première publication (Réel)

28 septembre 2026

Mises à jour des dossiers d'étude

Dernière mise à jour publiée (Réel)

6 octobre 2026

Dernière mise à jour soumise répondant aux critères de contrôle qualité

2 octobre 2026

Dernière vérification

1 septembre 2026

Plus d'information

Termes liés à cette étude

Autres numéros d'identification d'étude

  • OMU-2023/259

Plan pour les données individuelles des participants (IPD)

Prévoyez-vous de partager les données individuelles des participants (DPI) ?

NON

Description du régime IPD

Individual participant data will not be shared in a public repository. De-identified data are available from the corresponding author on reasonable request.

Informations sur les médicaments et les dispositifs, documents d'étude

Étudie un produit pharmaceutique réglementé par la FDA américaine

Non

Étudie un produit d'appareil réglementé par la FDA américaine

Non

Ces informations ont été extraites directement du site Web clinicaltrials.gov sans aucune modification. Si vous avez des demandes de modification, de suppression ou de mise à jour des détails de votre étude, veuillez contacter register@clinicaltrials.gov. Dès qu'un changement est mis en œuvre sur clinicaltrials.gov, il sera également mis à jour automatiquement sur notre site Web .

S'abonner