Questa pagina è stata tradotta automaticamente e l'accuratezza della traduzione non è garantita. Si prega di fare riferimento al Versione inglese per un testo di partenza.

Palatal Guide Wire for Canine Control During Miniscrew-Supported Distalization (PGWCanine)

2 ottobre 2026 aggiornato da: Selim Arici, Atlas University

Effect of a Palatal Guide Wire on Maxillary Canine Displacement During Miniscrew-Supported Distalization: A Split-Mouth Randomized Controlled Trial

When crowded or protruded teeth are treated by removing an upper premolar on each side, the canine (eye tooth) is first moved backward into the space. As it moves, the tooth tends to rotate and tip out of position, and this rotation is one of the hardest movements to correct and most likely to come back later. This study tested a simple addition to the usual treatment: a small passive wire attached to the inner (palate) side of the canine and connected to the back tooth, meant to guide the canine and keep it from rotating, without adding any extra force.

Sixteen adolescents who needed an upper premolar removed on both sides took part. Because each person has two sides, every patient received both approaches at once: on one randomly chosen side the guide wire was added, and the other side was treated the same way but without it, serving as that patient's own comparison. This split-mouth design lets each patient act as their own control.

The canine was moved backward on both sides using the same light spring and a small bone screw for anchorage. The researchers took dental scans at the start and after one, two, and three months and measured how far each canine moved, how much it rotated and tipped, and whether the back tooth drifted forward. The goal was to find out whether the guide wire reduces unwanted rotation and tipping and affects how quickly the canine moves, without weakening the anchorage.

Panoramica dello studio

Descrizione dettagliata

This was a prospective, single-center, split-mouth randomized controlled trial conducted in the Department of Orthodontics, Faculty of Dentistry, Ondokuz Mayıs University. Sixteen patients (12 female, 4 male; mean age 16.6 ± 1.7 years) with Angle Class II division 1 or 2 malocclusion requiring bilateral maxillary first premolar extraction with maximum anchorage were enrolled.

In each patient, the side to receive the guide wire was randomly allocated, balanced so that the guide wire was placed on the right side in 8 patients and on the left in 8. Both canines were distalized with a 150-g nickel-titanium closed coil spring extended from an interradicular miniscrew to a U-shaped power arm seated in the vertical slot of the canine bracket. On the experimental side only, a passive 0.020-inch round stainless steel wire was engaged between a bracket bonded to the palatal surface of the canine and the first molar band sheath; this wire was never activated and added no force to the system.

Alginate impressions were taken at the start of distalization (T0) and after 1 (T1), 2 (T2), and 3 (T3) months. Casts were scanned and superimposed on the medial and lateral limits of the third palatal ruga and the medial limit of the second. Distopalatal rotation, canine distalization, canine tipping, and first molar anchorage loss were measured and compared between the guide wire and control sides using paired statistics on the within-patient difference.

Tipo di studio

Interventistico

Iscrizione (Effettivo)

16

Fase

  • Non applicabile

Contatti e Sedi

Questa sezione fornisce i recapiti di coloro che conducono lo studio e informazioni su dove viene condotto lo studio.

Luoghi di studio

    • Marmara
      • Samsun, Marmara, Turchia (Türkiye), 55139
        • Ondokuz Mayıs University, Faculty of Dentistry, Department of Orthodontics

Criteri di partecipazione

I ricercatori cercano persone che corrispondano a una certa descrizione, chiamata criteri di ammissibilità. Alcuni esempi di questi criteri sono le condizioni generali di salute di una persona o trattamenti precedenti.

Criteri di ammissibilità

Età idonea allo studio

Da 14 anni a 20 anni (Bambino, Adulto)

Accetta volontari sani

No

Sessi ammissibili allo studio

Tutto

Descrizione

Inclusion Criteria:

  • Angle Class II division 1 or division 2 malocclusion
  • Indication for maxillary first premolar extraction
  • Maximum anchorage requirement
  • Minimal or no maxillary incisor crowding
  • No previous orthodontic treatment
  • No congenitally missing or previously extracted maxillary teeth other than third molars
  • Completed pubertal growth spurt

Exclusion Criteria:

  • Any systemic disease or regular medication use
  • Poor oral hygiene or active periodontal disease

Piano di studio

Questa sezione fornisce i dettagli del piano di studio, compreso il modo in cui lo studio è progettato e ciò che lo studio sta misurando.

Come è strutturato lo studio?

Dettagli di progettazione

  • Scopo principale: Trattamento
  • Assegnazione: Randomizzato
  • Modello interventistico: Assegnazione incrociata
  • Mascheramento: Nessuno (etichetta aperta)

Armi e interventi

Gruppo di partecipanti / Arm
Intervento / Trattamento
Sperimentale: Guide wire side

The maxillary canine on the randomly allocated side was distalized with a 150-g nickel-titanium closed coil spring from an interradicular miniscrew to a power arm in the vertical slot of the canine bracket, with a passive palatal guide wire engaged between a bracket on the palatal surface of the canine and the first molar band sheath.

A passive 0.020-inch round stainless steel wire engaged between a bracket bonded to the palatal surface of the maxillary canine and the first molar band sheath. The wire was never activated and added no force to the distalization system.

Distalization of the maxillary canine with a 150-g nickel-titanium closed coil spring extended from an interradicular miniscrew to a U-shaped power arm seated in the vertical slot of the canine bracket.

Comparatore attivo: Control side

The contralateral canine was distalized with the identical coil-spring and power-arm system, without a palatal guide wire.

Distalization of the maxillary canine with a 150-g nickel-titanium closed coil spring extended from an interradicular miniscrew to a U-shaped power arm seated in the vertical slot of the canine bracket.

Cosa sta misurando lo studio?

Misure di risultato primarie

Misura del risultato
Misura Descrizione
Lasso di tempo
Cumulative distopalatal rotation of the maxillary canine
Lasso di tempo: Baseline (T0) and 3 months (T3)

Change from baseline in the angle between the sagittal reference line and a line through the canine cusp tip along the palatal ridge, measured on rugae-superimposed digital models and compared between the guide wire and control sides.

Baseline (T0) and 3 months (T3)
Cumulative canine distalization
Lasso di tempo: Baseline (T0) and 3 months (T3)

Change from baseline in the perpendicular distance from the canine cusp tip to the sagittal reference line, compared between the guide wire and control sides.

Baseline (T0) and 3 months (T3)

Misure di risultato secondarie

Misura del risultato
Misura Descrizione
Lasso di tempo
Canine tipping
Lasso di tempo: Baseline (T0) and 3 months (T3)

Change from baseline in the disto-occlusal angle of the canine relative to the horizontal reference, compared between sides.

Baseline (T0) and 3 months (T3)
First molar anchorage loss
Lasso di tempo: Baseline (T0) and 3 months (T3)

Mesial movement of the maxillary first molar, measured from its mesial contact point to the sagittal reference line, compared between sides.

Baseline (T0) and 3 months (T3)
Monthly rate of canine distalization and rotation
Lasso di tempo: T0, 1 month (T1), 2 months (T2), and 3 months (T3)

Distalization and rotation increments per monthly interval, compared between sides.

T0, 1 month (T1), 2 months (T2), and 3 months (T3)

Collaboratori e investigatori

Qui è dove troverai le persone e le organizzazioni coinvolte in questo studio.

Studiare le date dei record

Queste date tengono traccia dell'avanzamento della registrazione dello studio e dell'invio dei risultati di sintesi a ClinicalTrials.gov. I record degli studi e i risultati riportati vengono esaminati dalla National Library of Medicine (NLM) per assicurarsi che soddisfino specifici standard di controllo della qualità prima di essere pubblicati sul sito Web pubblico.

Studia le date principali

Inizio studio (Effettivo)

4 marzo 2024

Completamento primario (Effettivo)

16 agosto 2024

Completamento dello studio (Effettivo)

16 agosto 2024

Date di iscrizione allo studio

Primo inviato

22 settembre 2026

Primo inviato che soddisfa i criteri di controllo qualità

22 settembre 2026

Primo Inserito (Effettivo)

28 settembre 2026

Aggiornamenti dei record di studio

Ultimo aggiornamento pubblicato (Effettivo)

6 ottobre 2026

Ultimo aggiornamento inviato che soddisfa i criteri QC

2 ottobre 2026

Ultimo verificato

1 settembre 2026

Maggiori informazioni

Termini relativi a questo studio

Altri numeri di identificazione dello studio

  • OMU-2023/259

Piano per i dati dei singoli partecipanti (IPD)

Hai intenzione di condividere i dati dei singoli partecipanti (IPD)?

NO

Descrizione del piano IPD

Individual participant data will not be shared in a public repository. De-identified data are available from the corresponding author on reasonable request.

Informazioni su farmaci e dispositivi, documenti di studio

Studia un prodotto farmaceutico regolamentato dalla FDA degli Stati Uniti

No

Studia un dispositivo regolamentato dalla FDA degli Stati Uniti

No

Queste informazioni sono state recuperate direttamente dal sito web clinicaltrials.gov senza alcuna modifica. In caso di richieste di modifica, rimozione o aggiornamento dei dettagli dello studio, contattare register@clinicaltrials.gov. Non appena verrà implementata una modifica su clinicaltrials.gov, questa verrà aggiornata automaticamente anche sul nostro sito web .

Sottoscrivi