Strong Kinesio Taping and Shoulder Performance (StrongKinesio)
2026年8月22日 更新者：Nazli Cigercioglu、Hacettepe University
Acute Effects of Strong Kinesio Taping on Shoulder Isokinetic Performance in Professional Basketball Players
This study evaluated the immediate effects of Strong Kinesio Taping on shoulder muscle performance in professional male basketball players. The study used a randomized crossover design in which each participant completed three experimental conditions: Strong Kinesio Taping, sham taping, and no taping. The testing sessions were separated by a 72-hour washout period.
During each session, the internal and external rotator muscle performance of the dominant shoulder was assessed using an isokinetic dynamometer at angular velocities of 60°/s and 240°/s. The main outcomes were peak torque and total work of the shoulder internal and external rotator muscles. The external-to-internal rotator strength ratio was also evaluated to determine whether taping affected the balance between these muscle groups.
調査の概要
状態
完了
詳細な説明
This randomized, sham-controlled, repeated-measures crossover study was designed to investigate the immediate effects of Strong Kinesio Taping on shoulder isokinetic muscle performance in professional male basketball players. Each participant completed three experimental conditions in a randomized order: Strong Kinesio Taping, sham taping, and no taping. Consecutive testing sessions were separated by a 72-hour washout period to minimize possible carryover effects. Because each participant underwent all three conditions, participants served as their own controls.
Professional male basketball players who regularly participated in training and competition were assessed for eligibility. Participants were required to be free from shoulder pain or injury at the time of testing. Individuals with a history of shoulder surgery, neurological disorders, or musculoskeletal conditions affecting upper-extremity function were excluded. Before participation, all athletes received written and verbal information about the study procedures and provided written informed consent.
At each testing session, participants completed a standardized upper-extremity warm-up and familiarization contractions before the isokinetic assessment. Strong Kinesio Taping was applied to the dominant shoulder using a supraspinatus muscle inhibition technique and a glenohumeral mechanical correction technique. Sham taping was applied using the same tape material but without therapeutic tension or application principles intended to influence muscle function. In the no-taping condition, participants underwent the same testing procedures without tape application.
Shoulder internal and external rotator muscle performance was assessed using an isokinetic dynamometer. Participants were tested in a seated position with the shoulder at 90 degrees of abduction, the elbow at 90 degrees of flexion, and the forearm in a neutral position. The trunk and shoulder were stabilized, and the dynamometer axis was aligned with the axis of glenohumeral rotation.
Testing was performed at angular velocities of 60 degrees per second and 240 degrees per second. Participants completed five maximal repetitions at 60 degrees per second and 15 maximal repetitions at 240 degrees per second. A standardized rest period was provided between the two testing velocities.
The primary outcome measures were peak torque and total work of the shoulder internal and external rotator muscles at each angular velocity. The external-to-internal rotator strength ratio was evaluated as a secondary outcome to determine whether the taping conditions affected the relative balance between the shoulder rotator muscle groups.
研究の種類
介入
入学 (実際)
26
段階
- 適用できない
連絡先と場所
このセクションには、調査を実施する担当者の連絡先の詳細と、この調査が実施されている場所に関する情報が記載されています。
研究場所
-
-
Kagithane
-
Istanbul、Kagithane、トルコ（Türkiye）、34408
- Atlas University
-
-
参加基準
研究者は、適格基準と呼ばれる特定の説明に適合する人を探します。これらの基準のいくつかの例は、人の一般的な健康状態または以前の治療です。
適格基準
就学可能な年齢
- 大人
健康ボランティアの受け入れ
はい
説明
Inclusion Criteria:
- active participation in professional basketball competition,
- regular training participation
- absence of shoulder pain or injury at the time of testing.
Exclusion Criteria:
- a history of shoulder surgery,
- neurological disorders,
- any musculoskeletal condition affecting upper-extremity function
研究計画
このセクションでは、研究がどのように設計され、研究が何を測定しているかなど、研究計画の詳細を提供します。
研究はどのように設計されていますか？
デザインの詳細
- 主な目的：他の
- 割り当て：ランダム化
- 介入モデル：クロスオーバー割り当て
- マスキング：なし（オープンラベル）
武器と介入
参加者グループ / アーム |
介入・治療 |
|---|---|
|
実験的：Strong KT-Sham-No Taping Sequence
Participants received Strong Kinesio Taping during the first testing session, sham taping during the second testing session, and no taping during the third testing session.
Consecutive sessions were separated by a 72-hour washout period.
|
A 5-cm-wide Strong Kinesio Tape was applied to the dominant shoulder by a certified Kinesio Taping practitioner.
The application included a supraspinatus muscle inhibition technique with approximately 10%-15% tape tension from insertion to origin and a glenohumeral mechanical correction technique with approximately 50%-75% tape tension from the anterior to the posterior aspect of the glenohumeral joint.
Shoulder isokinetic performance was assessed following the tape application.
The same tape material was applied to the dominant shoulder without therapeutic tension and without application principles intended to facilitate muscle activation or provide mechanical correction.
Participants subsequently underwent the same standardized isokinetic testing protocol.
No tape was applied to the dominant shoulder.
Participants completed the same standardized warm-up, familiarization, and isokinetic testing procedures used during the taping conditions.
|
|
実験的：Strong KT-No Taping-Sham Sequence
Participants received Strong Kinesio Taping during the first testing session, no taping during the second testing session, and sham taping during the third testing session.
Consecutive sessions were separated by a 72-hour washout period.
|
A 5-cm-wide Strong Kinesio Tape was applied to the dominant shoulder by a certified Kinesio Taping practitioner.
The application included a supraspinatus muscle inhibition technique with approximately 10%-15% tape tension from insertion to origin and a glenohumeral mechanical correction technique with approximately 50%-75% tape tension from the anterior to the posterior aspect of the glenohumeral joint.
Shoulder isokinetic performance was assessed following the tape application.
The same tape material was applied to the dominant shoulder without therapeutic tension and without application principles intended to facilitate muscle activation or provide mechanical correction.
Participants subsequently underwent the same standardized isokinetic testing protocol.
No tape was applied to the dominant shoulder.
Participants completed the same standardized warm-up, familiarization, and isokinetic testing procedures used during the taping conditions.
|
|
実験的：Sham-Strong KT-No Taping Sequence
Participants received sham taping during the first testing session, Strong Kinesio Taping during the second testing session, and no taping during the third testing session.
Consecutive sessions were separated by a 72-hour washout period.
|
A 5-cm-wide Strong Kinesio Tape was applied to the dominant shoulder by a certified Kinesio Taping practitioner.
The application included a supraspinatus muscle inhibition technique with approximately 10%-15% tape tension from insertion to origin and a glenohumeral mechanical correction technique with approximately 50%-75% tape tension from the anterior to the posterior aspect of the glenohumeral joint.
Shoulder isokinetic performance was assessed following the tape application.
The same tape material was applied to the dominant shoulder without therapeutic tension and without application principles intended to facilitate muscle activation or provide mechanical correction.
Participants subsequently underwent the same standardized isokinetic testing protocol.
No tape was applied to the dominant shoulder.
Participants completed the same standardized warm-up, familiarization, and isokinetic testing procedures used during the taping conditions.
|
|
実験的：Sham-No Taping-Strong KT Sequence
Participants received sham taping during the first testing session, no taping during the second testing session, and Strong Kinesio Taping during the third testing session.
Consecutive sessions were separated by a 72-hour washout period.
|
A 5-cm-wide Strong Kinesio Tape was applied to the dominant shoulder by a certified Kinesio Taping practitioner.
The application included a supraspinatus muscle inhibition technique with approximately 10%-15% tape tension from insertion to origin and a glenohumeral mechanical correction technique with approximately 50%-75% tape tension from the anterior to the posterior aspect of the glenohumeral joint.
Shoulder isokinetic performance was assessed following the tape application.
The same tape material was applied to the dominant shoulder without therapeutic tension and without application principles intended to facilitate muscle activation or provide mechanical correction.
Participants subsequently underwent the same standardized isokinetic testing protocol.
No tape was applied to the dominant shoulder.
Participants completed the same standardized warm-up, familiarization, and isokinetic testing procedures used during the taping conditions.
|
|
実験的：No Taping-Strong KT-Sham Sequence
Participants received no taping during the first testing session, Strong Kinesio Taping during the second testing session, and sham taping during the third testing session.
Consecutive sessions were separated by a 72-hour washout period.
|
A 5-cm-wide Strong Kinesio Tape was applied to the dominant shoulder by a certified Kinesio Taping practitioner.
The application included a supraspinatus muscle inhibition technique with approximately 10%-15% tape tension from insertion to origin and a glenohumeral mechanical correction technique with approximately 50%-75% tape tension from the anterior to the posterior aspect of the glenohumeral joint.
Shoulder isokinetic performance was assessed following the tape application.
The same tape material was applied to the dominant shoulder without therapeutic tension and without application principles intended to facilitate muscle activation or provide mechanical correction.
Participants subsequently underwent the same standardized isokinetic testing protocol.
No tape was applied to the dominant shoulder.
Participants completed the same standardized warm-up, familiarization, and isokinetic testing procedures used during the taping conditions.
|
|
実験的：No Taping-Sham-Strong KT Sequence
Participants received no taping during the first testing session, sham taping during the second testing session, and Strong Kinesio Taping during the third testing session.
Consecutive sessions were separated by a 72-hour washout period.
|
A 5-cm-wide Strong Kinesio Tape was applied to the dominant shoulder by a certified Kinesio Taping practitioner.
The application included a supraspinatus muscle inhibition technique with approximately 10%-15% tape tension from insertion to origin and a glenohumeral mechanical correction technique with approximately 50%-75% tape tension from the anterior to the posterior aspect of the glenohumeral joint.
Shoulder isokinetic performance was assessed following the tape application.
The same tape material was applied to the dominant shoulder without therapeutic tension and without application principles intended to facilitate muscle activation or provide mechanical correction.
Participants subsequently underwent the same standardized isokinetic testing protocol.
No tape was applied to the dominant shoulder.
Participants completed the same standardized warm-up, familiarization, and isokinetic testing procedures used during the taping conditions.
|
この研究は何を測定していますか？
主要な結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
External Rotator Peak Torque at 60°/s
時間枠：Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Peak torque of the dominant shoulder external rotator muscles was measured using an isokinetic dynamometer at an angular velocity of 60°/s.
Peak torque was recorded in Newton-meters (Nm).
Higher values indicate greater maximal external rotator muscle strength.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
Internal Rotator Peak Torque at 60°/s
時間枠：Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Peak torque of the dominant shoulder internal rotator muscles was measured using an isokinetic dynamometer at an angular velocity of 60°/s.
Peak torque was recorded in Newton-meters (Nm).
Higher values indicate greater maximal internal rotator muscle strength.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
External Rotator Total Work at 60°/s
時間枠：Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Total work performed by the dominant shoulder external rotator muscles across five maximal repetitions was measured using an isokinetic dynamometer at an angular velocity of 60°/s.
Total work was recorded in joules (J).
Higher values indicate greater cumulative external rotator work.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
Internal Rotator Total Work at 60°/s
時間枠：Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Total work performed by the dominant shoulder internal rotator muscles across five maximal repetitions was measured using an isokinetic dynamometer at an angular velocity of 60°/s.
Total work was recorded in joules (J).
Higher values indicate greater cumulative internal rotator work.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
External Rotator Peak Torque at 240°/s
時間枠：Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Peak torque of the dominant shoulder external rotator muscles was measured using an isokinetic dynamometer at an angular velocity of 240°/s.
Peak torque was recorded in Newton-meters (Nm).
Higher values indicate greater maximal external rotator muscle performance at high angular velocity.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
Internal Rotator Peak Torque at 240°/s
時間枠：Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Peak torque of the dominant shoulder internal rotator muscles was measured using an isokinetic dynamometer at an angular velocity of 240°/s.
Peak torque was recorded in Newton-meters (Nm).
Higher values indicate greater maximal internal rotator muscle performance at high angular velocity.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
External Rotator Total Work at 240°/s
時間枠：Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Total work performed by the dominant shoulder external rotator muscles across 15 maximal repetitions was measured using an isokinetic dynamometer at an angular velocity of 240°/s.
Total work was recorded in joules (J).
Higher values indicate greater cumulative external rotator work.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
Internal Rotator Total Work at 240°/s
時間枠：Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Total work performed by the dominant shoulder internal rotator muscles across 15 maximal repetitions was measured using an isokinetic dynamometer at an angular velocity of 240°/s.
Total work was recorded in joules (J).
Higher values indicate greater cumulative internal rotator work.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
二次結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
External-to-Internal Rotator Peak Torque Ratio at 60°/s
時間枠：Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
The conventional external-to-internal rotator strength ratio of the dominant shoulder was calculated by dividing external rotator peak torque by internal rotator peak torque and multiplying the result by 100.
The ratio was expressed as a percentage (%).
It represents the relative strength balance between the shoulder external and internal rotator muscles; higher values do not necessarily indicate a better outcome.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
External-to-Internal Rotator Peak Torque Ratio at 240°/s
時間枠：Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
The conventional external-to-internal rotator strength ratio of the dominant shoulder was calculated by dividing external rotator peak torque by internal rotator peak torque and multiplying the result by 100.
The ratio was expressed as a percentage (%).
It represents the relative strength balance between the shoulder external and internal rotator muscles; higher values do not necessarily indicate a better outcome.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
協力者と研究者
ここでは、この調査に関係する人々や組織を見つけることができます。
スポンサー
研究記録日
これらの日付は、ClinicalTrials.gov への研究記録と要約結果の提出の進捗状況を追跡します。研究記録と報告された結果は、国立医学図書館 (NLM) によって審査され、公開 Web サイトに掲載される前に、特定の品質管理基準を満たしていることが確認されます。
主要日程の研究
研究開始 (実際)
2026年1月1日
一次修了 (実際)
2026年4月1日
研究の完了 (実際)
2026年8月1日
試験登録日
最初に提出
2026年8月22日
QC基準を満たした最初の提出物
2026年8月22日
最初の投稿 (実際)
2026年8月26日
学習記録の更新
投稿された最後の更新 (実際)
2026年8月26日
QC基準を満たした最後の更新が送信されました
2026年8月22日
最終確認日
2026年8月1日
詳しくは
本研究に関する用語
キーワード
その他の研究ID番号
- Strong kinesio isokinetic
- Selcuk University (レジストリ識別子：Selcuk University)
個々の参加者データ (IPD) の計画
個々の参加者データ (IPD) を共有する予定はありますか?
いいえ
医薬品およびデバイス情報、研究文書
米国FDA規制医薬品の研究
いいえ
米国FDA規制機器製品の研究
いいえ
この情報は、Web サイト clinicaltrials.gov から変更なしで直接取得したものです。研究の詳細を変更、削除、または更新するリクエストがある場合は、register@clinicaltrials.gov。 までご連絡ください。 clinicaltrials.gov に変更が加えられるとすぐに、ウェブサイトでも自動的に更新されます。