Strong Kinesio Taping and Shoulder Performance (StrongKinesio)
2026년 8월 22일 업데이트: Nazli Cigercioglu, Hacettepe University
Acute Effects of Strong Kinesio Taping on Shoulder Isokinetic Performance in Professional Basketball Players
This study evaluated the immediate effects of Strong Kinesio Taping on shoulder muscle performance in professional male basketball players. The study used a randomized crossover design in which each participant completed three experimental conditions: Strong Kinesio Taping, sham taping, and no taping. The testing sessions were separated by a 72-hour washout period.
During each session, the internal and external rotator muscle performance of the dominant shoulder was assessed using an isokinetic dynamometer at angular velocities of 60°/s and 240°/s. The main outcomes were peak torque and total work of the shoulder internal and external rotator muscles. The external-to-internal rotator strength ratio was also evaluated to determine whether taping affected the balance between these muscle groups.
연구 개요
상태
완전한
상세 설명
This randomized, sham-controlled, repeated-measures crossover study was designed to investigate the immediate effects of Strong Kinesio Taping on shoulder isokinetic muscle performance in professional male basketball players. Each participant completed three experimental conditions in a randomized order: Strong Kinesio Taping, sham taping, and no taping. Consecutive testing sessions were separated by a 72-hour washout period to minimize possible carryover effects. Because each participant underwent all three conditions, participants served as their own controls.
Professional male basketball players who regularly participated in training and competition were assessed for eligibility. Participants were required to be free from shoulder pain or injury at the time of testing. Individuals with a history of shoulder surgery, neurological disorders, or musculoskeletal conditions affecting upper-extremity function were excluded. Before participation, all athletes received written and verbal information about the study procedures and provided written informed consent.
At each testing session, participants completed a standardized upper-extremity warm-up and familiarization contractions before the isokinetic assessment. Strong Kinesio Taping was applied to the dominant shoulder using a supraspinatus muscle inhibition technique and a glenohumeral mechanical correction technique. Sham taping was applied using the same tape material but without therapeutic tension or application principles intended to influence muscle function. In the no-taping condition, participants underwent the same testing procedures without tape application.
Shoulder internal and external rotator muscle performance was assessed using an isokinetic dynamometer. Participants were tested in a seated position with the shoulder at 90 degrees of abduction, the elbow at 90 degrees of flexion, and the forearm in a neutral position. The trunk and shoulder were stabilized, and the dynamometer axis was aligned with the axis of glenohumeral rotation.
Testing was performed at angular velocities of 60 degrees per second and 240 degrees per second. Participants completed five maximal repetitions at 60 degrees per second and 15 maximal repetitions at 240 degrees per second. A standardized rest period was provided between the two testing velocities.
The primary outcome measures were peak torque and total work of the shoulder internal and external rotator muscles at each angular velocity. The external-to-internal rotator strength ratio was evaluated as a secondary outcome to determine whether the taping conditions affected the relative balance between the shoulder rotator muscle groups.
연구 유형
중재적
등록 (실제)
26
단계
- 해당 없음
연락처 및 위치
이 섹션에서는 연구를 수행하는 사람들의 연락처 정보와 이 연구가 수행되는 장소에 대한 정보를 제공합니다.
연구 장소
-
-
Kagithane
-
Istanbul, Kagithane, 터키 (Türkiye), 34408
- Atlas University
-
-
참여기준
연구원은 적격성 기준이라는 특정 설명에 맞는 사람을 찾습니다. 이러한 기준의 몇 가지 예는 개인의 일반적인 건강 상태 또는 이전 치료입니다.
자격 기준
공부할 수 있는 나이
- 성인
건강한 자원 봉사자를 받아들입니다
예
설명
Inclusion Criteria:
- active participation in professional basketball competition,
- regular training participation
- absence of shoulder pain or injury at the time of testing.
Exclusion Criteria:
- a history of shoulder surgery,
- neurological disorders,
- any musculoskeletal condition affecting upper-extremity function
공부 계획
이 섹션에서는 연구 설계 방법과 연구가 측정하는 내용을 포함하여 연구 계획에 대한 세부 정보를 제공합니다.
연구는 어떻게 설계됩니까?
디자인 세부사항
- 주 목적: 다른
- 할당: 무작위
- 중재 모델: 크로스오버 할당
- 마스킹: 없음(오픈 라벨)
무기와 개입
참가자 그룹 / 팔 |
개입 / 치료 |
|---|---|
|
실험적: Strong KT-Sham-No Taping Sequence
Participants received Strong Kinesio Taping during the first testing session, sham taping during the second testing session, and no taping during the third testing session.
Consecutive sessions were separated by a 72-hour washout period.
|
A 5-cm-wide Strong Kinesio Tape was applied to the dominant shoulder by a certified Kinesio Taping practitioner.
The application included a supraspinatus muscle inhibition technique with approximately 10%-15% tape tension from insertion to origin and a glenohumeral mechanical correction technique with approximately 50%-75% tape tension from the anterior to the posterior aspect of the glenohumeral joint.
Shoulder isokinetic performance was assessed following the tape application.
The same tape material was applied to the dominant shoulder without therapeutic tension and without application principles intended to facilitate muscle activation or provide mechanical correction.
Participants subsequently underwent the same standardized isokinetic testing protocol.
No tape was applied to the dominant shoulder.
Participants completed the same standardized warm-up, familiarization, and isokinetic testing procedures used during the taping conditions.
|
|
실험적: Strong KT-No Taping-Sham Sequence
Participants received Strong Kinesio Taping during the first testing session, no taping during the second testing session, and sham taping during the third testing session.
Consecutive sessions were separated by a 72-hour washout period.
|
A 5-cm-wide Strong Kinesio Tape was applied to the dominant shoulder by a certified Kinesio Taping practitioner.
The application included a supraspinatus muscle inhibition technique with approximately 10%-15% tape tension from insertion to origin and a glenohumeral mechanical correction technique with approximately 50%-75% tape tension from the anterior to the posterior aspect of the glenohumeral joint.
Shoulder isokinetic performance was assessed following the tape application.
The same tape material was applied to the dominant shoulder without therapeutic tension and without application principles intended to facilitate muscle activation or provide mechanical correction.
Participants subsequently underwent the same standardized isokinetic testing protocol.
No tape was applied to the dominant shoulder.
Participants completed the same standardized warm-up, familiarization, and isokinetic testing procedures used during the taping conditions.
|
|
실험적: Sham-Strong KT-No Taping Sequence
Participants received sham taping during the first testing session, Strong Kinesio Taping during the second testing session, and no taping during the third testing session.
Consecutive sessions were separated by a 72-hour washout period.
|
A 5-cm-wide Strong Kinesio Tape was applied to the dominant shoulder by a certified Kinesio Taping practitioner.
The application included a supraspinatus muscle inhibition technique with approximately 10%-15% tape tension from insertion to origin and a glenohumeral mechanical correction technique with approximately 50%-75% tape tension from the anterior to the posterior aspect of the glenohumeral joint.
Shoulder isokinetic performance was assessed following the tape application.
The same tape material was applied to the dominant shoulder without therapeutic tension and without application principles intended to facilitate muscle activation or provide mechanical correction.
Participants subsequently underwent the same standardized isokinetic testing protocol.
No tape was applied to the dominant shoulder.
Participants completed the same standardized warm-up, familiarization, and isokinetic testing procedures used during the taping conditions.
|
|
실험적: Sham-No Taping-Strong KT Sequence
Participants received sham taping during the first testing session, no taping during the second testing session, and Strong Kinesio Taping during the third testing session.
Consecutive sessions were separated by a 72-hour washout period.
|
A 5-cm-wide Strong Kinesio Tape was applied to the dominant shoulder by a certified Kinesio Taping practitioner.
The application included a supraspinatus muscle inhibition technique with approximately 10%-15% tape tension from insertion to origin and a glenohumeral mechanical correction technique with approximately 50%-75% tape tension from the anterior to the posterior aspect of the glenohumeral joint.
Shoulder isokinetic performance was assessed following the tape application.
The same tape material was applied to the dominant shoulder without therapeutic tension and without application principles intended to facilitate muscle activation or provide mechanical correction.
Participants subsequently underwent the same standardized isokinetic testing protocol.
No tape was applied to the dominant shoulder.
Participants completed the same standardized warm-up, familiarization, and isokinetic testing procedures used during the taping conditions.
|
|
실험적: No Taping-Strong KT-Sham Sequence
Participants received no taping during the first testing session, Strong Kinesio Taping during the second testing session, and sham taping during the third testing session.
Consecutive sessions were separated by a 72-hour washout period.
|
A 5-cm-wide Strong Kinesio Tape was applied to the dominant shoulder by a certified Kinesio Taping practitioner.
The application included a supraspinatus muscle inhibition technique with approximately 10%-15% tape tension from insertion to origin and a glenohumeral mechanical correction technique with approximately 50%-75% tape tension from the anterior to the posterior aspect of the glenohumeral joint.
Shoulder isokinetic performance was assessed following the tape application.
The same tape material was applied to the dominant shoulder without therapeutic tension and without application principles intended to facilitate muscle activation or provide mechanical correction.
Participants subsequently underwent the same standardized isokinetic testing protocol.
No tape was applied to the dominant shoulder.
Participants completed the same standardized warm-up, familiarization, and isokinetic testing procedures used during the taping conditions.
|
|
실험적: No Taping-Sham-Strong KT Sequence
Participants received no taping during the first testing session, sham taping during the second testing session, and Strong Kinesio Taping during the third testing session.
Consecutive sessions were separated by a 72-hour washout period.
|
A 5-cm-wide Strong Kinesio Tape was applied to the dominant shoulder by a certified Kinesio Taping practitioner.
The application included a supraspinatus muscle inhibition technique with approximately 10%-15% tape tension from insertion to origin and a glenohumeral mechanical correction technique with approximately 50%-75% tape tension from the anterior to the posterior aspect of the glenohumeral joint.
Shoulder isokinetic performance was assessed following the tape application.
The same tape material was applied to the dominant shoulder without therapeutic tension and without application principles intended to facilitate muscle activation or provide mechanical correction.
Participants subsequently underwent the same standardized isokinetic testing protocol.
No tape was applied to the dominant shoulder.
Participants completed the same standardized warm-up, familiarization, and isokinetic testing procedures used during the taping conditions.
|
연구는 무엇을 측정합니까?
주요 결과 측정
결과 측정 |
측정값 설명 |
기간 |
|---|---|---|
|
External Rotator Peak Torque at 60°/s
기간: Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Peak torque of the dominant shoulder external rotator muscles was measured using an isokinetic dynamometer at an angular velocity of 60°/s.
Peak torque was recorded in Newton-meters (Nm).
Higher values indicate greater maximal external rotator muscle strength.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
Internal Rotator Peak Torque at 60°/s
기간: Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Peak torque of the dominant shoulder internal rotator muscles was measured using an isokinetic dynamometer at an angular velocity of 60°/s.
Peak torque was recorded in Newton-meters (Nm).
Higher values indicate greater maximal internal rotator muscle strength.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
External Rotator Total Work at 60°/s
기간: Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Total work performed by the dominant shoulder external rotator muscles across five maximal repetitions was measured using an isokinetic dynamometer at an angular velocity of 60°/s.
Total work was recorded in joules (J).
Higher values indicate greater cumulative external rotator work.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
Internal Rotator Total Work at 60°/s
기간: Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Total work performed by the dominant shoulder internal rotator muscles across five maximal repetitions was measured using an isokinetic dynamometer at an angular velocity of 60°/s.
Total work was recorded in joules (J).
Higher values indicate greater cumulative internal rotator work.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
External Rotator Peak Torque at 240°/s
기간: Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Peak torque of the dominant shoulder external rotator muscles was measured using an isokinetic dynamometer at an angular velocity of 240°/s.
Peak torque was recorded in Newton-meters (Nm).
Higher values indicate greater maximal external rotator muscle performance at high angular velocity.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
Internal Rotator Peak Torque at 240°/s
기간: Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Peak torque of the dominant shoulder internal rotator muscles was measured using an isokinetic dynamometer at an angular velocity of 240°/s.
Peak torque was recorded in Newton-meters (Nm).
Higher values indicate greater maximal internal rotator muscle performance at high angular velocity.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
External Rotator Total Work at 240°/s
기간: Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Total work performed by the dominant shoulder external rotator muscles across 15 maximal repetitions was measured using an isokinetic dynamometer at an angular velocity of 240°/s.
Total work was recorded in joules (J).
Higher values indicate greater cumulative external rotator work.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
Internal Rotator Total Work at 240°/s
기간: Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
Total work performed by the dominant shoulder internal rotator muscles across 15 maximal repetitions was measured using an isokinetic dynamometer at an angular velocity of 240°/s.
Total work was recorded in joules (J).
Higher values indicate greater cumulative internal rotator work.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
2차 결과 측정
결과 측정 |
측정값 설명 |
기간 |
|---|---|---|
|
External-to-Internal Rotator Peak Torque Ratio at 60°/s
기간: Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
The conventional external-to-internal rotator strength ratio of the dominant shoulder was calculated by dividing external rotator peak torque by internal rotator peak torque and multiplying the result by 100.
The ratio was expressed as a percentage (%).
It represents the relative strength balance between the shoulder external and internal rotator muscles; higher values do not necessarily indicate a better outcome.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
|
External-to-Internal Rotator Peak Torque Ratio at 240°/s
기간: Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
The conventional external-to-internal rotator strength ratio of the dominant shoulder was calculated by dividing external rotator peak torque by internal rotator peak torque and multiplying the result by 100.
The ratio was expressed as a percentage (%).
It represents the relative strength balance between the shoulder external and internal rotator muscles; higher values do not necessarily indicate a better outcome.
|
Immediately following each experimental condition during each of the three testing sessions, with sessions separated by a 72-hour washout period.
|
공동 작업자 및 조사자
여기에서 이 연구와 관련된 사람과 조직을 찾을 수 있습니다.
연구 기록 날짜
이 날짜는 ClinicalTrials.gov에 대한 연구 기록 및 요약 결과 제출의 진행 상황을 추적합니다. 연구 기록 및 보고된 결과는 공개 웹사이트에 게시되기 전에 특정 품질 관리 기준을 충족하는지 확인하기 위해 국립 의학 도서관(NLM)에서 검토합니다.
연구 주요 날짜
연구 시작 (실제)
2026년 1월 1일
기본 완료 (실제)
2026년 4월 1일
연구 완료 (실제)
2026년 8월 1일
연구 등록 날짜
최초 제출
2026년 8월 22일
QC 기준을 충족하는 최초 제출
2026년 8월 22일
처음 게시됨 (실제)
2026년 8월 26일
연구 기록 업데이트
마지막 업데이트 게시됨 (실제)
2026년 8월 26일
QC 기준을 충족하는 마지막 업데이트 제출
2026년 8월 22일
마지막으로 확인됨
2026년 8월 1일
추가 정보
이 정보는 변경 없이 clinicaltrials.gov 웹사이트에서 직접 가져온 것입니다. 귀하의 연구 세부 정보를 변경, 제거 또는 업데이트하도록 요청하는 경우 register@clinicaltrials.gov. 문의하십시오. 변경 사항이 clinicaltrials.gov에 구현되는 즉시 저희 웹사이트에도 자동으로 업데이트됩니다. .