Milled vs 3D-Printed Partial-Coverage Restorations in Endodontically Treated Molars
Clinical Performance of CAD/CAM-Milled Versus 3D-Printed Composite Resin Partial-Coverage Restorations for Endodontically Treated Molars: A Randomized Controlled Clinical Trial
The goal of this clinical trial is to compare the clinical performance of Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM)-milled and 3D-printed composite resin partial-coverage restorations in endodontically treated molars.
The main questions it aims to answer are:
- Do 3D-printed composite resin partial-coverage restorations show similar clinical performance compared with CAD/CAM-milled composite resin restorations?
- Are there differences in survival, success rates, and complications between the two types of restorations over a 3-year follow-up period?
Researchers will compare CAD/CAM-milled composite resin restorations with 3D-printed composite resin restorations to evaluate their clinical performance.
Participants will:
- Receive a partial-coverage restoration (onlay or overlay) in an endodontically treated molar.
- Be randomly assigned to receive either a CAD/CAM-milled or a 3D-printed composite resin restoration.
- Attend follow-up visits at 12, 24, and 36 months.
- Undergo clinical evaluations by two blinded evaluators using the revised FDI criteria and standardized photographic documentation.
연구 개요
상태
정황
상세 설명
This randomized controlled clinical trial evaluates the clinical performance of indirect composite resin partial-coverage restorations fabricated using subtractive and additive manufacturing technologies in endodontically treated molars.
The study investigates whether 3D-printed composite resin restorations can achieve clinical outcomes comparable to CAD/CAM-milled composite resin restorations when used for cuspal coverage of structurally compromised posterior teeth.
All restorations will be fabricated using a fully digital workflow. Tooth preparation, immediate dentin sealing, digital intraoral scanning, restoration fabrication, and adhesive cementation procedures will be standardized and performed according to a predefined clinical protocol.
The trial will be conducted at Hospital San José, Santiago, Chile, using commercially available restorative materials manufactured by subtractive and additive technologies. Clinical performance will be evaluated according to internationally accepted restorative assessment criteria.
The study aims to generate medium-term clinical evidence regarding the use of 3D-printed composite resin restorations as a potential alternative to conventional CAD/CAM-milled restorations in restorative dentistry.
연구 유형
등록 (추정된)
단계
- 해당 없음
연락처 및 위치
연구 연락처
- 이름: Tomás Yoma Galleguillos, DDS
- 전화번호: +56985768407
- 이메일: tomasyoma@gmail.com
연구 장소
-
-
Santiago Metropolitan
-
Santiago, Santiago Metropolitan, 칠레
- 모병
- Hospital San José
-
연락하다:
- Tomás Yoma Galleguillos, DDS
- 전화번호: +56985768407
- 이메일: tomasyoma@gmail.com
-
수석 연구원:
- Tomás Yoma Galleguillos, DDS
-
-
참여기준
자격 기준
공부할 수 있는 나이
- 성인
- 고령자
건강한 자원 봉사자를 받아들입니다
설명
Inclusion Criteria:
- Adults aged 18 to 70 years
- Absence of active periodontal disease
- Good oral hygiene (O'Leary plaque index <20%)
- Absence of parafunctional habits (e.g., bruxism, onychophagia)
- Endodontically treated first molars (maxillary or mandibular) with extensive Class II cavities and loss of at least one cusp, requiring onlay or overlay restoration
- Tooth with functional occlusal contact and at least one proximal contact
- Referred from the Endodontics Department of Hospital San José, with endodontic treatment completed at the same institution
- Ability to provide written informed consent
- Ability to attend follow-up visits at 12, 24, and 36 months
Exclusion Criteria:
- Untreated active periodontal disease
- Poor oral hygiene (O'Leary plaque index ≥20%)
- Generalized active caries
- Active parafunctional habits
- Teeth with complete circumferential structural destruction or insufficient coronal tooth structure for onlay/overlay restoration
- Subgingival margins compromising the biologic width
- Known allergy to study materials
- Pregnancy or breastfeeding
공부 계획
연구는 어떻게 설계됩니까?
디자인 세부사항
- 주 목적: 치료
- 할당: 무작위
- 중재 모델: 병렬 할당
- 마스킹: 더블
무기와 개입
참가자 그룹 / 팔 |
개입 / 치료 |
|---|---|
|
활성 비교기: Milled Composite Resin Onlay/Overlay
Participants receive indirect onlay or overlay restorations fabricated from milled composite resin blocks (HC Block, Shofu, Japan) for the rehabilitation of endodontically treated molars with extensive loss of tooth structure.
Tooth preparation, immediate dentin sealing, digital impression, and adhesive cementation procedures are standardized for all participants
|
Indirect partial coverage restoration fabricated from milled composite resin blocks (HC Block, Shofu, Japan) and adhesively cemented on endodontically treated molars.
|
|
실험적: 3D-Printed Composite Resin Onlay/Overlay
Participants receive indirect onlay or overlay restorations fabricated from 3D-printed composite resin (Rodin Sculpture, Pac-Dent, USA) for the rehabilitation of endodontically treated molars with extensive loss of tooth structure.
Tooth preparation, immediate dentin sealing, digital impression, and adhesive cementation procedures are standardized for all participants.
|
Indirect partial coverage restoration fabricated from 3D-printed composite resin (Rodin Sculpture, Pac-Dent, USA) and adhesively cemented on endodontically treated molars.
|
연구는 무엇을 측정합니까?
주요 결과 측정
결과 측정 |
측정값 설명 |
기간 |
|---|---|---|
|
Clinical performance of onlay and overlay restorations according to revised World Dental Federation (FDI) criteria.
기간: Baseline, 12 months, 24 months, and 36 months (primary endpoint at 36 months)
|
Clinical performance of milled and 3D-printed composite resin onlay and overlay restorations assessed using the revised FDI criteria.
An overall FDI evaluation score will be assigned to each restoration by two blinded evaluators.
|
Baseline, 12 months, 24 months, and 36 months (primary endpoint at 36 months)
|
2차 결과 측정
결과 측정 |
측정값 설명 |
기간 |
|---|---|---|
|
Restoration survival rate
기간: 36 months
|
Survival of milled and 3D-printed composite resin onlay and overlay restorations.
A restoration will be considered surviving if it remains in function at follow-up, regardless of the need for minor repair.
|
36 months
|
|
Restoration success rate
기간: 36 months
|
Success of restorations according to revised FDI criteria.
Restorations receiving clinically acceptable ratings and not requiring corrective intervention will be considered successful.
|
36 months
|
|
Restoration failure rate
기간: 36 months
|
Proportion of restorations requiring replacement during the 36-month follow-up period.
|
36 months
|
|
Clinical complications
기간: Baseline to 36 months
|
Frequency and type of clinical complications observed during the 36-month follow-up period, including mechanical, biological, and esthetic complications associated with the restorations.
|
Baseline to 36 months
|
공동 작업자 및 조사자
수사관
- 수석 연구원: Tomás Yoma Galleguillos, DDS, Hospital San José, Santiago, Chile
연구 기록 날짜
연구 주요 날짜
연구 시작 (실제)
기본 완료 (추정된)
연구 완료 (추정된)
연구 등록 날짜
최초 제출
QC 기준을 충족하는 최초 제출
처음 게시됨 (실제)
연구 기록 업데이트
마지막 업데이트 게시됨 (실제)
QC 기준을 충족하는 마지막 업데이트 제출
마지막으로 확인됨
추가 정보
이 연구와 관련된 용어
키워드
추가 관련 MeSH 약관
기타 연구 ID 번호
- HSJ-RCT-3DPRINT-001
개별 참가자 데이터(IPD) 계획
개별 참가자 데이터(IPD)를 공유할 계획입니까?
IPD 계획 설명
약물 및 장치 정보, 연구 문서
미국 FDA 규제 의약품 연구
미국 FDA 규제 기기 제품 연구
이 정보는 변경 없이 clinicaltrials.gov 웹사이트에서 직접 가져온 것입니다. 귀하의 연구 세부 정보를 변경, 제거 또는 업데이트하도록 요청하는 경우 register@clinicaltrials.gov. 문의하십시오. 변경 사항이 clinicaltrials.gov에 구현되는 즉시 저희 웹사이트에도 자동으로 업데이트됩니다. .