Milled vs 3D-Printed Partial-Coverage Restorations in Endodontically Treated Molars
Clinical Performance of CAD/CAM-Milled Versus 3D-Printed Composite Resin Partial-Coverage Restorations for Endodontically Treated Molars: A Randomized Controlled Clinical Trial
The goal of this clinical trial is to compare the clinical performance of Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM)-milled and 3D-printed composite resin partial-coverage restorations in endodontically treated molars.
The main questions it aims to answer are:
- Do 3D-printed composite resin partial-coverage restorations show similar clinical performance compared with CAD/CAM-milled composite resin restorations?
- Are there differences in survival, success rates, and complications between the two types of restorations over a 3-year follow-up period?
Researchers will compare CAD/CAM-milled composite resin restorations with 3D-printed composite resin restorations to evaluate their clinical performance.
Participants will:
- Receive a partial-coverage restoration (onlay or overlay) in an endodontically treated molar.
- Be randomly assigned to receive either a CAD/CAM-milled or a 3D-printed composite resin restoration.
- Attend follow-up visits at 12, 24, and 36 months.
- Undergo clinical evaluations by two blinded evaluators using the revised FDI criteria and standardized photographic documentation.
Descripción general del estudio
Estado
Condiciones
Descripción detallada
This randomized controlled clinical trial evaluates the clinical performance of indirect composite resin partial-coverage restorations fabricated using subtractive and additive manufacturing technologies in endodontically treated molars.
The study investigates whether 3D-printed composite resin restorations can achieve clinical outcomes comparable to CAD/CAM-milled composite resin restorations when used for cuspal coverage of structurally compromised posterior teeth.
All restorations will be fabricated using a fully digital workflow. Tooth preparation, immediate dentin sealing, digital intraoral scanning, restoration fabrication, and adhesive cementation procedures will be standardized and performed according to a predefined clinical protocol.
The trial will be conducted at Hospital San José, Santiago, Chile, using commercially available restorative materials manufactured by subtractive and additive technologies. Clinical performance will be evaluated according to internationally accepted restorative assessment criteria.
The study aims to generate medium-term clinical evidence regarding the use of 3D-printed composite resin restorations as a potential alternative to conventional CAD/CAM-milled restorations in restorative dentistry.
Tipo de estudio
Inscripción (Estimado)
Fase
- No aplica
Contactos y Ubicaciones
Estudio Contacto
- Nombre: Tomás Yoma Galleguillos, DDS
- Número de teléfono: +56985768407
- Correo electrónico: tomasyoma@gmail.com
Ubicaciones de estudio
-
-
Santiago Metropolitan
-
Santiago, Santiago Metropolitan, Chile
- Reclutamiento
- Hospital San Jose
-
Contacto:
- Tomás Yoma Galleguillos, DDS
- Número de teléfono: +56985768407
- Correo electrónico: tomasyoma@gmail.com
-
Investigador principal:
- Tomás Yoma Galleguillos, DDS
-
-
Criterios de participación
Criterio de elegibilidad
Edades elegibles para estudiar
- Adulto
- Adulto Mayor
Acepta Voluntarios Saludables
Descripción
Inclusion Criteria:
- Adults aged 18 to 70 years
- Absence of active periodontal disease
- Good oral hygiene (O'Leary plaque index <20%)
- Absence of parafunctional habits (e.g., bruxism, onychophagia)
- Endodontically treated first molars (maxillary or mandibular) with extensive Class II cavities and loss of at least one cusp, requiring onlay or overlay restoration
- Tooth with functional occlusal contact and at least one proximal contact
- Referred from the Endodontics Department of Hospital San José, with endodontic treatment completed at the same institution
- Ability to provide written informed consent
- Ability to attend follow-up visits at 12, 24, and 36 months
Exclusion Criteria:
- Untreated active periodontal disease
- Poor oral hygiene (O'Leary plaque index ≥20%)
- Generalized active caries
- Active parafunctional habits
- Teeth with complete circumferential structural destruction or insufficient coronal tooth structure for onlay/overlay restoration
- Subgingival margins compromising the biologic width
- Known allergy to study materials
- Pregnancy or breastfeeding
Plan de estudios
¿Cómo está diseñado el estudio?
Detalles de diseño
- Propósito principal: Tratamiento
- Asignación: Aleatorizado
- Modelo Intervencionista: Asignación paralela
- Enmascaramiento: Doble
Armas e Intervenciones
Grupo de participantes/brazo |
Intervención / Tratamiento |
|---|---|
|
Comparador activo: Milled Composite Resin Onlay/Overlay
Participants receive indirect onlay or overlay restorations fabricated from milled composite resin blocks (HC Block, Shofu, Japan) for the rehabilitation of endodontically treated molars with extensive loss of tooth structure.
Tooth preparation, immediate dentin sealing, digital impression, and adhesive cementation procedures are standardized for all participants
|
Indirect partial coverage restoration fabricated from milled composite resin blocks (HC Block, Shofu, Japan) and adhesively cemented on endodontically treated molars.
|
|
Experimental: 3D-Printed Composite Resin Onlay/Overlay
Participants receive indirect onlay or overlay restorations fabricated from 3D-printed composite resin (Rodin Sculpture, Pac-Dent, USA) for the rehabilitation of endodontically treated molars with extensive loss of tooth structure.
Tooth preparation, immediate dentin sealing, digital impression, and adhesive cementation procedures are standardized for all participants.
|
Indirect partial coverage restoration fabricated from 3D-printed composite resin (Rodin Sculpture, Pac-Dent, USA) and adhesively cemented on endodontically treated molars.
|
¿Qué mide el estudio?
Medidas de resultado primarias
Medida de resultado |
Medida Descripción |
Periodo de tiempo |
|---|---|---|
|
Clinical performance of onlay and overlay restorations according to revised World Dental Federation (FDI) criteria.
Periodo de tiempo: Baseline, 12 months, 24 months, and 36 months (primary endpoint at 36 months)
|
Clinical performance of milled and 3D-printed composite resin onlay and overlay restorations assessed using the revised FDI criteria.
An overall FDI evaluation score will be assigned to each restoration by two blinded evaluators.
|
Baseline, 12 months, 24 months, and 36 months (primary endpoint at 36 months)
|
Medidas de resultado secundarias
Medida de resultado |
Medida Descripción |
Periodo de tiempo |
|---|---|---|
|
Restoration survival rate
Periodo de tiempo: 36 months
|
Survival of milled and 3D-printed composite resin onlay and overlay restorations.
A restoration will be considered surviving if it remains in function at follow-up, regardless of the need for minor repair.
|
36 months
|
|
Restoration success rate
Periodo de tiempo: 36 months
|
Success of restorations according to revised FDI criteria.
Restorations receiving clinically acceptable ratings and not requiring corrective intervention will be considered successful.
|
36 months
|
|
Restoration failure rate
Periodo de tiempo: 36 months
|
Proportion of restorations requiring replacement during the 36-month follow-up period.
|
36 months
|
|
Clinical complications
Periodo de tiempo: Baseline to 36 months
|
Frequency and type of clinical complications observed during the 36-month follow-up period, including mechanical, biological, and esthetic complications associated with the restorations.
|
Baseline to 36 months
|
Colaboradores e Investigadores
Patrocinador
Investigadores
- Investigador principal: Tomás Yoma Galleguillos, DDS, Hospital San José, Santiago, Chile
Fechas de registro del estudio
Fechas importantes del estudio
Inicio del estudio (Actual)
Finalización primaria (Estimado)
Finalización del estudio (Estimado)
Fechas de registro del estudio
Enviado por primera vez
Primero enviado que cumplió con los criterios de control de calidad
Publicado por primera vez (Actual)
Actualizaciones de registros de estudio
Última actualización publicada (Actual)
Última actualización enviada que cumplió con los criterios de control de calidad
Última verificación
Más información
Términos relacionados con este estudio
Palabras clave
Términos MeSH relevantes adicionales
Otros números de identificación del estudio
- HSJ-RCT-3DPRINT-001
Plan de datos de participantes individuales (IPD)
¿Planea compartir datos de participantes individuales (IPD)?
Descripción del plan IPD
Información sobre medicamentos y dispositivos, documentos del estudio
Estudia un producto farmacéutico regulado por la FDA de EE. UU.
Estudia un producto de dispositivo regulado por la FDA de EE. UU.
Esta información se obtuvo directamente del sitio web clinicaltrials.gov sin cambios. Si tiene alguna solicitud para cambiar, eliminar o actualizar los detalles de su estudio, comuníquese con register@clinicaltrials.gov. Tan pronto como se implemente un cambio en clinicaltrials.gov, también se actualizará automáticamente en nuestro sitio web. .