Milled vs 3D-Printed Partial-Coverage Restorations in Endodontically Treated Molars
Clinical Performance of CAD/CAM-Milled Versus 3D-Printed Composite Resin Partial-Coverage Restorations for Endodontically Treated Molars: A Randomized Controlled Clinical Trial
The goal of this clinical trial is to compare the clinical performance of Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM)-milled and 3D-printed composite resin partial-coverage restorations in endodontically treated molars.
The main questions it aims to answer are:
- Do 3D-printed composite resin partial-coverage restorations show similar clinical performance compared with CAD/CAM-milled composite resin restorations?
- Are there differences in survival, success rates, and complications between the two types of restorations over a 3-year follow-up period?
Researchers will compare CAD/CAM-milled composite resin restorations with 3D-printed composite resin restorations to evaluate their clinical performance.
Participants will:
- Receive a partial-coverage restoration (onlay or overlay) in an endodontically treated molar.
- Be randomly assigned to receive either a CAD/CAM-milled or a 3D-printed composite resin restoration.
- Attend follow-up visits at 12, 24, and 36 months.
- Undergo clinical evaluations by two blinded evaluators using the revised FDI criteria and standardized photographic documentation.
Обзор исследования
Статус
Условия
Подробное описание
This randomized controlled clinical trial evaluates the clinical performance of indirect composite resin partial-coverage restorations fabricated using subtractive and additive manufacturing technologies in endodontically treated molars.
The study investigates whether 3D-printed composite resin restorations can achieve clinical outcomes comparable to CAD/CAM-milled composite resin restorations when used for cuspal coverage of structurally compromised posterior teeth.
All restorations will be fabricated using a fully digital workflow. Tooth preparation, immediate dentin sealing, digital intraoral scanning, restoration fabrication, and adhesive cementation procedures will be standardized and performed according to a predefined clinical protocol.
The trial will be conducted at Hospital San José, Santiago, Chile, using commercially available restorative materials manufactured by subtractive and additive technologies. Clinical performance will be evaluated according to internationally accepted restorative assessment criteria.
The study aims to generate medium-term clinical evidence regarding the use of 3D-printed composite resin restorations as a potential alternative to conventional CAD/CAM-milled restorations in restorative dentistry.
Тип исследования
Регистрация (Оцененный)
Фаза
- Непригодный
Контакты и местонахождение
Контакты исследования
- Имя: Tomás Yoma Galleguillos, DDS
- Номер телефона: +56985768407
- Электронная почта: tomasyoma@gmail.com
Места учебы
-
-
Santiago Metropolitan
-
Santiago, Santiago Metropolitan, Чили
- Рекрутинг
- Hospital San Jose
-
Контакт:
- Tomás Yoma Galleguillos, DDS
- Номер телефона: +56985768407
- Электронная почта: tomasyoma@gmail.com
-
Главный следователь:
- Tomás Yoma Galleguillos, DDS
-
-
Критерии участия
Критерии приемлемости
Возраст, подходящий для обучения
- Взрослый
- Пожилой взрослый
Принимает здоровых добровольцев
Описание
Inclusion Criteria:
- Adults aged 18 to 70 years
- Absence of active periodontal disease
- Good oral hygiene (O'Leary plaque index <20%)
- Absence of parafunctional habits (e.g., bruxism, onychophagia)
- Endodontically treated first molars (maxillary or mandibular) with extensive Class II cavities and loss of at least one cusp, requiring onlay or overlay restoration
- Tooth with functional occlusal contact and at least one proximal contact
- Referred from the Endodontics Department of Hospital San José, with endodontic treatment completed at the same institution
- Ability to provide written informed consent
- Ability to attend follow-up visits at 12, 24, and 36 months
Exclusion Criteria:
- Untreated active periodontal disease
- Poor oral hygiene (O'Leary plaque index ≥20%)
- Generalized active caries
- Active parafunctional habits
- Teeth with complete circumferential structural destruction or insufficient coronal tooth structure for onlay/overlay restoration
- Subgingival margins compromising the biologic width
- Known allergy to study materials
- Pregnancy or breastfeeding
Учебный план
Как устроено исследование?
Детали дизайна
- Основная цель: Уход
- Распределение: Рандомизированный
- Интервенционная модель: Параллельное назначение
- Маскировка: Двойной
Оружие и интервенции
Группа участников / Армия |
Вмешательство/лечение |
|---|---|
|
Активный компаратор: Milled Composite Resin Onlay/Overlay
Participants receive indirect onlay or overlay restorations fabricated from milled composite resin blocks (HC Block, Shofu, Japan) for the rehabilitation of endodontically treated molars with extensive loss of tooth structure.
Tooth preparation, immediate dentin sealing, digital impression, and adhesive cementation procedures are standardized for all participants
|
Indirect partial coverage restoration fabricated from milled composite resin blocks (HC Block, Shofu, Japan) and adhesively cemented on endodontically treated molars.
|
|
Экспериментальный: 3D-Printed Composite Resin Onlay/Overlay
Participants receive indirect onlay or overlay restorations fabricated from 3D-printed composite resin (Rodin Sculpture, Pac-Dent, USA) for the rehabilitation of endodontically treated molars with extensive loss of tooth structure.
Tooth preparation, immediate dentin sealing, digital impression, and adhesive cementation procedures are standardized for all participants.
|
Indirect partial coverage restoration fabricated from 3D-printed composite resin (Rodin Sculpture, Pac-Dent, USA) and adhesively cemented on endodontically treated molars.
|
Что измеряет исследование?
Первичные показатели результатов
Мера результата |
Мера Описание |
Временное ограничение |
|---|---|---|
|
Clinical performance of onlay and overlay restorations according to revised World Dental Federation (FDI) criteria.
Временное ограничение: Baseline, 12 months, 24 months, and 36 months (primary endpoint at 36 months)
|
Clinical performance of milled and 3D-printed composite resin onlay and overlay restorations assessed using the revised FDI criteria.
An overall FDI evaluation score will be assigned to each restoration by two blinded evaluators.
|
Baseline, 12 months, 24 months, and 36 months (primary endpoint at 36 months)
|
Вторичные показатели результатов
Мера результата |
Мера Описание |
Временное ограничение |
|---|---|---|
|
Restoration survival rate
Временное ограничение: 36 months
|
Survival of milled and 3D-printed composite resin onlay and overlay restorations.
A restoration will be considered surviving if it remains in function at follow-up, regardless of the need for minor repair.
|
36 months
|
|
Restoration success rate
Временное ограничение: 36 months
|
Success of restorations according to revised FDI criteria.
Restorations receiving clinically acceptable ratings and not requiring corrective intervention will be considered successful.
|
36 months
|
|
Restoration failure rate
Временное ограничение: 36 months
|
Proportion of restorations requiring replacement during the 36-month follow-up period.
|
36 months
|
|
Clinical complications
Временное ограничение: Baseline to 36 months
|
Frequency and type of clinical complications observed during the 36-month follow-up period, including mechanical, biological, and esthetic complications associated with the restorations.
|
Baseline to 36 months
|
Соавторы и исследователи
Спонсор
Следователи
- Главный следователь: Tomás Yoma Galleguillos, DDS, Hospital San José, Santiago, Chile
Даты записи исследования
Изучение основных дат
Начало исследования (Действительный)
Первичное завершение (Оцененный)
Завершение исследования (Оцененный)
Даты регистрации исследования
Первый отправленный
Впервые представлено, что соответствует критериям контроля качества
Первый опубликованный (Действительный)
Обновления учебных записей
Последнее опубликованное обновление (Действительный)
Последнее отправленное обновление, отвечающее критериям контроля качества
Последняя проверка
Дополнительная информация
Термины, связанные с этим исследованием
Ключевые слова
Дополнительные соответствующие термины MeSH
Другие идентификационные номера исследования
- HSJ-RCT-3DPRINT-001
Планирование данных отдельных участников (IPD)
Планируете делиться данными об отдельных участниках (IPD)?
Описание плана IPD
Информация о лекарствах и устройствах, исследовательские документы
Изучает лекарственный продукт, регулируемый FDA США.
Изучает продукт устройства, регулируемый Управлением по санитарному надзору за качеством пищевых продуктов и медикаментов США.
Эта информация была получена непосредственно с веб-сайта clinicaltrials.gov без каких-либо изменений. Если у вас есть запросы на изменение, удаление или обновление сведений об исследовании, обращайтесь по адресу register@clinicaltrials.gov. Как только изменение будет реализовано на clinicaltrials.gov, оно будет автоматически обновлено и на нашем веб-сайте. .