3D Facial Scanning in Full-Arch Implant Prosthodontics: Time Efficiency and Patient Satisfaction
2026년 8월 5일 업데이트: Lamiaa Farouk, Ain Shams University
Effect of Integrating 3D Facial Scanning in Full-Arch Implant Prosthetics: Time Efficiency and Patient Satisfaction
This study compares two ways of planning the bite (jaw-relation) stage of full-arch, implant-supported dental prosthesis treatment: a standard digital approach, and the same approach with the addition of 3D facial scanning, which lets the dental team plan the new teeth against a scan of the patient's own face.
The study measured how patients felt about their treatment using a validated questionnaire, and also tracked how many clinic visits and adjustments each approach needed.
Twenty-two patients took part, randomly assigned to one of the two approaches.
연구 개요
상태
완전한
상세 설명
Full-arch implant-supported prosthetic rehabilitation requires accurate jaw-relation recording, which determines both the functional relationship between the arches and the esthetic integration of the final prosthesis within the patient's face.
Conventional digital workflows rely on intraoral scanning and wax-rim jaw-relation techniques without reference to extraoral facial anatomy.
This prospective, randomized, single-center pilot trial compared a conventional-digital hybrid workflow (Group A) with an enhanced digital workflow incorporating 3D facial scanning (Group B) in patients undergoing full-arch, implant-supported maxillary prosthetic rehabilitation (All-on-6 configuration).
All patients received six implants placed using a fully guided surgical protocol with a stackable surgical guide, followed by an immediately loaded PMMA provisional prosthesis during a three-month osseointegration period.
Following healing, patients were randomly allocated (computer-generated sequence, allocation concealed by an independent third party) to Group A or Group B for the prosthetic (jaw-relation recording) phase.
In Group B, 3D facial scanning was merged with intraoral scans and CBCT data to guide prosthetic design against facial reference planes.
The primary outcome was patient-reported oral health-related quality of life, measured using the validated short-form Oral Health Impact Profile (OHIP-14) questionnaire, administered after four weeks of intraoral trial wear of the try-in prosthesis (T1) and again four weeks after delivery of the definitive prosthesis (T2).
Secondary outcomes included the number of clinical appointments and chairside adjustments required to complete the prosthetic phase, and implant/prosthesis survival at six months.
The definitive prosthesis in both groups consisted of a milled cobalt-chromium framework with layered zirconia, with a mutually protected occlusal scheme.
Outcome assessment (clinical/technical evaluation and statistical analysis) was blinded; blinding of patients and the treating clinician was not feasible given the visibly different nature of the two workflows.
연구 유형
중재적
등록 (실제)
22
단계
- 해당 없음
연락처 및 위치
이 섹션에서는 연구를 수행하는 사람들의 연락처 정보와 이 연구가 수행되는 장소에 대한 정보를 제공합니다.
연구 장소
-
-
-
Cairo, 이집트
- Oral and Maxillofacial Prosthodontics Department, Faculty of Dentistry, Ain Shams University
-
-
참여기준
연구원은 적격성 기준이라는 특정 설명에 맞는 사람을 찾습니다. 이러한 기준의 몇 가지 예는 개인의 일반적인 건강 상태 또는 이전 치료입니다.
자격 기준
공부할 수 있는 나이
- 성인
- 고령자
건강한 자원 봉사자를 받아들입니다
아니
설명
Inclusion Criteria:
- Adults (≥18 years) indicated for full-arch maxillary implant-supported fixed prosthetic rehabilitation
- Completion of the surgical phase with stable implant osseointegration
- Presence of healthy peri-implant soft tissues
- Adequate oral hygiene status
- Sufficient bone and soft-tissue conditions compatible with full-arch prosthetic rehabilitation
- Ability to comply with all scheduled follow-up visits
- Capacity to maintain natural head position during facial scanning procedures
- Absence of significant gag reflex interfering with scanning/impression procedures
- Ability to communicate effectively and complete questionnaires
- Provision of written informed consent
- Physically and psychologically fit for the planned treatment
Exclusion Criteria:
- Severe skeletal or orthognathic discrepancies
- History of significant facial trauma or surgery affecting facial symmetry
- Prior maxillofacial pathology affecting the surgical/prosthetic site
- Uncontrolled systemic diseases affecting healing or treatment tolerance
- Use of medications that alter osseointegration or facial soft tissues
- Active oral or peri-implant infection
- Neuromuscular disorders or temporomandibular joint dysfunction affecting jaw positioning
- Conditions affecting the ability to maintain stable head position for scanning
- Severe psychomotor limitations
- Known hypersensitivity to materials used in bite registration or prosthesis fabrication
- Inability or unwillingness to provide informed consent
- Pregnancy or lactation, if deemed a contraindication by the supervising clinician
- Poor compliance or demonstrated unreliability in past dental or medical care
공부 계획
이 섹션에서는 연구 설계 방법과 연구가 측정하는 내용을 포함하여 연구 계획에 대한 세부 정보를 제공합니다.
연구는 어떻게 설계됩니까?
디자인 세부사항
- 주 목적: 치료
- 할당: 무작위
- 중재 모델: 병렬 할당
- 마스킹: 하나의
무기와 개입
참가자 그룹 / 팔 |
개입 / 치료 |
|---|---|
|
활성 비교기: Conventional-Digital Hybrid Workflow
aw-relation recording using intraoral digital scanning, digitally fabricated bite blocks, and a traditional wax-rim jaw-relation technique with facebow transfer and mechanical articulator mounting, without facial scanning.
|
Jaw-relation recording using intraoral digital scanning, digitally fabricated bite blocks, and a traditional wax-rim jaw-relation technique with facebow transfer and mechanical articulator mounting, w
|
|
실험적: Enhanced Digital Workflow with 3D Facial Scanning
Same base digital workflow as Group A, with the addition of high-resolution 3D facial scanning (Shining 3D structured-light scanner), merged with intraoral scans and CBCT data via Exocad software to guide prosthetic alignment against extraoral facial landmarks.
|
Integration of 3D facial scanning into the jaw-relation recording stage of full-arch implant prosthetic rehabilitation, merging facial, intraoral, and CBCT datasets to guide prosthetic design against facial reference planes.
Performed in addition to the same base digital workflow described in Intervention 1.
|
연구는 무엇을 측정합니까?
주요 결과 측정
결과 측정 |
측정값 설명 |
기간 |
|---|---|---|
|
Total Oral Health Impact Profile-14 (OHIP-14) Score at Trial-Wear Timepoint
기간: 4 weeks
|
Patient-reported oral health-related quality of life, 14 items across 7 domains, scored 0-56 (higher = worse).
Assessed after the patient had worn the try-in (trial) prosthesis intraorally for four weeks (T1).
|
4 weeks
|
|
Total Oral Health Impact Profile-14 (OHIP-14) Score at Post-Delivery Timepoint
기간: 4 weeks
|
Patient-reported oral health-related quality of life, 14 items across 7 domains, scored 0-56 (higher = worse).
Assessed four weeks after delivery of the definitive prosthesis (T2).
|
4 weeks
|
2차 결과 측정
결과 측정 |
측정값 설명 |
기간 |
|---|---|---|
|
Number of Clinical Appointments to Complete the Prosthetic Phase
기간: up to 12 weeks
|
Total number of clinic visits from jaw-relation registration through prosthesis delivery.
|
up to 12 weeks
|
|
Number of Try-In Adjustments
기간: up to 8 weeks
|
Number of chairside occlusal corrections (selective grinding, material addition, or jaw-relation re-verification) required at try-in before definitive fabrication.
|
up to 8 weeks
|
|
Implant and Prosthesis Survival / Complications at 6 Months
기간: 6 months post-delivery
|
Clinical review for implant failure, prosthesis fracture, or other mechanical/biological complications.
|
6 months post-delivery
|
공동 작업자 및 조사자
여기에서 이 연구와 관련된 사람과 조직을 찾을 수 있습니다.
연구 기록 날짜
이 날짜는 ClinicalTrials.gov에 대한 연구 기록 및 요약 결과 제출의 진행 상황을 추적합니다. 연구 기록 및 보고된 결과는 공개 웹사이트에 게시되기 전에 특정 품질 관리 기준을 충족하는지 확인하기 위해 국립 의학 도서관(NLM)에서 검토합니다.
연구 주요 날짜
연구 시작 (실제)
2024년 10월 31일
기본 완료 (실제)
2025년 9월 1일
연구 완료 (실제)
2026년 7월 25일
연구 등록 날짜
최초 제출
2026년 8월 1일
QC 기준을 충족하는 최초 제출
2026년 8월 5일
처음 게시됨 (실제)
2026년 8월 7일
연구 기록 업데이트
마지막 업데이트 게시됨 (실제)
2026년 8월 7일
QC 기준을 충족하는 마지막 업데이트 제출
2026년 8월 5일
마지막으로 확인됨
2026년 8월 1일
추가 정보
이 연구와 관련된 용어
키워드
기타 연구 ID 번호
- FDASU-Rec IR/M102515
개별 참가자 데이터(IPD) 계획
개별 참가자 데이터(IPD)를 공유할 계획입니까?
아니요
IPD 계획 설명
Individual participant data will not be shared.
The original informed consent obtained from participants covered their participation in this study but did not include provisions for the public sharing of individual-level, de-identified data with third parties or external researchers.
In addition, given the small sample size (n = 11 per group) within a single department, there is a meaningful risk that even de-identified individual-level data could be re-identified.
No data-sharing repository or access infrastructure has been established for this dataset.
Aggregate, de-identified results are reported in the published thesis and any resulting publications.
약물 및 장치 정보, 연구 문서
미국 FDA 규제 의약품 연구
아니
미국 FDA 규제 기기 제품 연구
아니
이 정보는 변경 없이 clinicaltrials.gov 웹사이트에서 직접 가져온 것입니다. 귀하의 연구 세부 정보를 변경, 제거 또는 업데이트하도록 요청하는 경우 register@clinicaltrials.gov. 문의하십시오. 변경 사항이 clinicaltrials.gov에 구현되는 즉시 저희 웹사이트에도 자동으로 업데이트됩니다. .