3D Facial Scanning in Full-Arch Implant Prosthodontics: Time Efficiency and Patient Satisfaction
5 août 2026 mis à jour par: Lamiaa Farouk, Ain Shams University
Effect of Integrating 3D Facial Scanning in Full-Arch Implant Prosthetics: Time Efficiency and Patient Satisfaction
This study compares two ways of planning the bite (jaw-relation) stage of full-arch, implant-supported dental prosthesis treatment: a standard digital approach, and the same approach with the addition of 3D facial scanning, which lets the dental team plan the new teeth against a scan of the patient's own face.
The study measured how patients felt about their treatment using a validated questionnaire, and also tracked how many clinic visits and adjustments each approach needed.
Twenty-two patients took part, randomly assigned to one of the two approaches.
Aperçu de l'étude
Statut
Complété
Description détaillée
Full-arch implant-supported prosthetic rehabilitation requires accurate jaw-relation recording, which determines both the functional relationship between the arches and the esthetic integration of the final prosthesis within the patient's face.
Conventional digital workflows rely on intraoral scanning and wax-rim jaw-relation techniques without reference to extraoral facial anatomy.
This prospective, randomized, single-center pilot trial compared a conventional-digital hybrid workflow (Group A) with an enhanced digital workflow incorporating 3D facial scanning (Group B) in patients undergoing full-arch, implant-supported maxillary prosthetic rehabilitation (All-on-6 configuration).
All patients received six implants placed using a fully guided surgical protocol with a stackable surgical guide, followed by an immediately loaded PMMA provisional prosthesis during a three-month osseointegration period.
Following healing, patients were randomly allocated (computer-generated sequence, allocation concealed by an independent third party) to Group A or Group B for the prosthetic (jaw-relation recording) phase.
In Group B, 3D facial scanning was merged with intraoral scans and CBCT data to guide prosthetic design against facial reference planes.
The primary outcome was patient-reported oral health-related quality of life, measured using the validated short-form Oral Health Impact Profile (OHIP-14) questionnaire, administered after four weeks of intraoral trial wear of the try-in prosthesis (T1) and again four weeks after delivery of the definitive prosthesis (T2).
Secondary outcomes included the number of clinical appointments and chairside adjustments required to complete the prosthetic phase, and implant/prosthesis survival at six months.
The definitive prosthesis in both groups consisted of a milled cobalt-chromium framework with layered zirconia, with a mutually protected occlusal scheme.
Outcome assessment (clinical/technical evaluation and statistical analysis) was blinded; blinding of patients and the treating clinician was not feasible given the visibly different nature of the two workflows.
Type d'étude
Interventionnel
Inscription (Réel)
22
Phase
- N'est pas applicable
Contacts et emplacements
Cette section fournit les coordonnées de ceux qui mènent l'étude et des informations sur le lieu où cette étude est menée.
Lieux d'étude
-
-
-
Cairo, Egypte
- Oral and Maxillofacial Prosthodontics Department, Faculty of Dentistry, Ain Shams University
-
-
Critères de participation
Les chercheurs recherchent des personnes qui correspondent à une certaine description, appelée critères d'éligibilité. Certains exemples de ces critères sont l'état de santé général d'une personne ou des traitements antérieurs.
Critère d'éligibilité
Âges éligibles pour étudier
- Adulte
- Adulte plus âgé
Accepte les volontaires sains
Non
La description
Inclusion Criteria:
- Adults (≥18 years) indicated for full-arch maxillary implant-supported fixed prosthetic rehabilitation
- Completion of the surgical phase with stable implant osseointegration
- Presence of healthy peri-implant soft tissues
- Adequate oral hygiene status
- Sufficient bone and soft-tissue conditions compatible with full-arch prosthetic rehabilitation
- Ability to comply with all scheduled follow-up visits
- Capacity to maintain natural head position during facial scanning procedures
- Absence of significant gag reflex interfering with scanning/impression procedures
- Ability to communicate effectively and complete questionnaires
- Provision of written informed consent
- Physically and psychologically fit for the planned treatment
Exclusion Criteria:
- Severe skeletal or orthognathic discrepancies
- History of significant facial trauma or surgery affecting facial symmetry
- Prior maxillofacial pathology affecting the surgical/prosthetic site
- Uncontrolled systemic diseases affecting healing or treatment tolerance
- Use of medications that alter osseointegration or facial soft tissues
- Active oral or peri-implant infection
- Neuromuscular disorders or temporomandibular joint dysfunction affecting jaw positioning
- Conditions affecting the ability to maintain stable head position for scanning
- Severe psychomotor limitations
- Known hypersensitivity to materials used in bite registration or prosthesis fabrication
- Inability or unwillingness to provide informed consent
- Pregnancy or lactation, if deemed a contraindication by the supervising clinician
- Poor compliance or demonstrated unreliability in past dental or medical care
Plan d'étude
Cette section fournit des détails sur le plan d'étude, y compris la façon dont l'étude est conçue et ce que l'étude mesure.
Comment l'étude est-elle conçue ?
Détails de conception
- Objectif principal: Traitement
- Répartition: Randomisé
- Modèle interventionnel: Affectation parallèle
- Masquage: Seul
Armes et Interventions
Groupe de participants / Bras |
Intervention / Traitement |
|---|---|
|
Comparateur actif: Conventional-Digital Hybrid Workflow
aw-relation recording using intraoral digital scanning, digitally fabricated bite blocks, and a traditional wax-rim jaw-relation technique with facebow transfer and mechanical articulator mounting, without facial scanning.
|
Jaw-relation recording using intraoral digital scanning, digitally fabricated bite blocks, and a traditional wax-rim jaw-relation technique with facebow transfer and mechanical articulator mounting, w
|
|
Expérimental: Enhanced Digital Workflow with 3D Facial Scanning
Same base digital workflow as Group A, with the addition of high-resolution 3D facial scanning (Shining 3D structured-light scanner), merged with intraoral scans and CBCT data via Exocad software to guide prosthetic alignment against extraoral facial landmarks.
|
Integration of 3D facial scanning into the jaw-relation recording stage of full-arch implant prosthetic rehabilitation, merging facial, intraoral, and CBCT datasets to guide prosthetic design against facial reference planes.
Performed in addition to the same base digital workflow described in Intervention 1.
|
Que mesure l'étude ?
Principaux critères de jugement
Mesure des résultats |
Description de la mesure |
Délai |
|---|---|---|
|
Total Oral Health Impact Profile-14 (OHIP-14) Score at Trial-Wear Timepoint
Délai: 4 weeks
|
Patient-reported oral health-related quality of life, 14 items across 7 domains, scored 0-56 (higher = worse).
Assessed after the patient had worn the try-in (trial) prosthesis intraorally for four weeks (T1).
|
4 weeks
|
|
Total Oral Health Impact Profile-14 (OHIP-14) Score at Post-Delivery Timepoint
Délai: 4 weeks
|
Patient-reported oral health-related quality of life, 14 items across 7 domains, scored 0-56 (higher = worse).
Assessed four weeks after delivery of the definitive prosthesis (T2).
|
4 weeks
|
Mesures de résultats secondaires
Mesure des résultats |
Description de la mesure |
Délai |
|---|---|---|
|
Number of Clinical Appointments to Complete the Prosthetic Phase
Délai: up to 12 weeks
|
Total number of clinic visits from jaw-relation registration through prosthesis delivery.
|
up to 12 weeks
|
|
Number of Try-In Adjustments
Délai: up to 8 weeks
|
Number of chairside occlusal corrections (selective grinding, material addition, or jaw-relation re-verification) required at try-in before definitive fabrication.
|
up to 8 weeks
|
|
Implant and Prosthesis Survival / Complications at 6 Months
Délai: 6 months post-delivery
|
Clinical review for implant failure, prosthesis fracture, or other mechanical/biological complications.
|
6 months post-delivery
|
Collaborateurs et enquêteurs
C'est ici que vous trouverez les personnes et les organisations impliquées dans cette étude.
Parrainer
Dates d'enregistrement des études
Ces dates suivent la progression des dossiers d'étude et des soumissions de résultats sommaires à ClinicalTrials.gov. Les dossiers d'étude et les résultats rapportés sont examinés par la Bibliothèque nationale de médecine (NLM) pour s'assurer qu'ils répondent à des normes de contrôle de qualité spécifiques avant d'être publiés sur le site Web public.
Dates principales de l'étude
Début de l'étude (Réel)
31 octobre 2024
Achèvement primaire (Réel)
1 septembre 2025
Achèvement de l'étude (Réel)
25 juillet 2026
Dates d'inscription aux études
Première soumission
1 août 2026
Première soumission répondant aux critères de contrôle qualité
5 août 2026
Première publication (Réel)
7 août 2026
Mises à jour des dossiers d'étude
Dernière mise à jour publiée (Réel)
7 août 2026
Dernière mise à jour soumise répondant aux critères de contrôle qualité
5 août 2026
Dernière vérification
1 août 2026
Plus d'information
Termes liés à cette étude
Mots clés
Autres numéros d'identification d'étude
- FDASU-Rec IR/M102515
Plan pour les données individuelles des participants (IPD)
Prévoyez-vous de partager les données individuelles des participants (DPI) ?
NON
Description du régime IPD
Individual participant data will not be shared.
The original informed consent obtained from participants covered their participation in this study but did not include provisions for the public sharing of individual-level, de-identified data with third parties or external researchers.
In addition, given the small sample size (n = 11 per group) within a single department, there is a meaningful risk that even de-identified individual-level data could be re-identified.
No data-sharing repository or access infrastructure has been established for this dataset.
Aggregate, de-identified results are reported in the published thesis and any resulting publications.
Informations sur les médicaments et les dispositifs, documents d'étude
Étudie un produit pharmaceutique réglementé par la FDA américaine
Non
Étudie un produit d'appareil réglementé par la FDA américaine
Non
Ces informations ont été extraites directement du site Web clinicaltrials.gov sans aucune modification. Si vous avez des demandes de modification, de suppression ou de mise à jour des détails de votre étude, veuillez contacter register@clinicaltrials.gov. Dès qu'un changement est mis en œuvre sur clinicaltrials.gov, il sera également mis à jour automatiquement sur notre site Web .