이 페이지는 자동 번역되었으며 번역의 정확성을 보장하지 않습니다. 참조하십시오 영문판 원본 텍스트의 경우.

Immediate Molar Implants With Customized Healing Abutments in Different Post-Extraction Socket Classes (IMPLA-CHA)

2026년 8월 31일 업데이트: Plovdiv Medical University

Evaluation of the Success of Immediate Implants in the Molar Region Using Individually Fabricated Healing Abutments (Sulcus Formers) in Different Classes of Post-Extraction Sockets: A Prospective Cohort Study

Immediate implant placement into a fresh extraction socket shortens overall treatment time and reduces the number of surgical procedures, but the fit between the implant and the socket walls, and the resulting soft-tissue contour, differ substantially between socket types. This study evaluates immediate implant placement in the molar and posterior region combined with an individually fabricated (customized) healing abutment, or sulcus former, that seals the socket and shapes the emergence profile from the day of surgery.

Consecutive patients with a non-restorable posterior tooth are treated with flapless atraumatic extraction, immediate implant placement, grafting of the residual gap, and a chairside customized healing abutment fabricated on a titanium temporary abutment. Participants are grouped by the class of the post-extraction socket (A, B or C) according to the interradicular septal bone available for primary stability.

Outcomes are preservation of peri-implant soft-tissue volume assessed with an intraoral scanner, preservation of alveolar bone volume assessed on cone-beam computed tomography, implant stability measured by resonance frequency analysis (ISQ) at placement and before loading, and time to definitive loading. Early wound healing on the Landry index, the degree of bone corticalization before loading, implant survival, healing-abutment complications and analgesic requirement are also recorded.

연구 개요

상태

모병

정황

개입 / 치료

연구 유형

관찰

등록 (추정된)

60

연락처 및 위치

이 섹션에서는 연구를 수행하는 사람들의 연락처 정보와 이 연구가 수행되는 장소에 대한 정보를 제공합니다.

연구 연락처

연구 장소

  • 불가리아
      • Plovdiv, 불가리아, 4000
        • 모병
        • Department of Dental Implantology, Faculty of Dental Medicine, Medical University - Plovdiv
        • 연락하다:

참여기준

연구원은 적격성 기준이라는 특정 설명에 맞는 사람을 찾습니다. 이러한 기준의 몇 가지 예는 개인의 일반적인 건강 상태 또는 이전 치료입니다.

자격 기준

공부할 수 있는 나이

  • 성인
  • 고령자

건강한 자원 봉사자를 받아들입니다

아니

샘플링 방법

비확률 샘플

연구 인구

Consecutive adult patients attending the Department of Dental Implantology, Faculty of Dental Medicine, Medical University - Plovdiv, with a non-restorable posterior (premolar or molar) tooth indicated for extraction and suitable for immediate implant placement.

설명

Inclusion Criteria:

  • Age 18 years or over
  • ASA physical status I or II
  • A non-restorable posterior tooth (premolar or molar) indicated for extraction: clinically unrestorable crown, advanced chronic periodontitis, failed or untreatable endodontic therapy, or vertical root fracture
  • Residual bone permitting implant placement with adequate primary stability
  • Able and willing to give written informed consent and to attend the follow-up schedule

Exclusion Criteria:

  • ASA physical status III or higher
  • Pregnancy or lactation
  • Uncontrolled diabetes mellitus
  • Smoking more than 10 cigarettes per day
  • Drug or alcohol abuse
  • Current or previous bisphosphonate or other antiresorptive therapy
  • Head and neck radiotherapy
  • Immunosuppression
  • Anticoagulant or antiplatelet therapy where the required pre-operative preparation is declined
  • Psychiatric conditions preventing compliance with the study procedures
  • Known titanium allergy
  • Severe bruxism
  • Acute infection at the surgical site
  • Advanced alveolar resorption precluding immediate implant placement

공부 계획

이 섹션에서는 연구 설계 방법과 연구가 측정하는 내용을 포함하여 연구 계획에 대한 세부 정보를 제공합니다.

연구는 어떻게 설계됩니까?

디자인 세부사항

코호트 및 개입

그룹/코호트
개입 / 치료
Socket class A
Posterior extraction socket in which the interradicular septal bone is sufficient to house the implant, giving circumferential bone contact along its coronal part. Because a molar socket is frequently 10 mm or more across, a residual void commonly remains around the implant within the socket. Participants receive immediate implant placement with a chairside customized healing abutment.
절차: Immediate implant placement with customized healing abutment
Flapless atraumatic extraction with tooth sectioning and root-by-root removal, socket debridement and saline irrigation, followed by immediate placement of a MegaGen AnyRidge implant (MegaGen Implant Co., Daegu, South Korea; diameter 4.0-5.5 mm, length 8.5-11.5 mm) in a subcrestal position at the level of the septal bone. Where insertion torque of at least 35 Ncm and an implant stability quotient of at least 65 are achieved, the residual gap is grafted with equine-derived xenograft granules of 0.25 mm (Maggi Biotechnology, Andezeno, Italy) and a customized healing abutment is fabricated chairside from flowable composite on a titanium temporary abutment (Spider Web technique), hand-tightened and left free of occlusal contact. No barrier membrane is used. Definitive loading is planned at three months.
Socket class B
Posterior extraction socket in which the septal bone is sufficient to stabilise the implant but not to house it, so that part of the implant surface faces the socket rather than bone. Participants receive immediate implant placement with a chairside customized healing abutment.
절차: Immediate implant placement with customized healing abutment
Flapless atraumatic extraction with tooth sectioning and root-by-root removal, socket debridement and saline irrigation, followed by immediate placement of a MegaGen AnyRidge implant (MegaGen Implant Co., Daegu, South Korea; diameter 4.0-5.5 mm, length 8.5-11.5 mm) in a subcrestal position at the level of the septal bone. Where insertion torque of at least 35 Ncm and an implant stability quotient of at least 65 are achieved, the residual gap is grafted with equine-derived xenograft granules of 0.25 mm (Maggi Biotechnology, Andezeno, Italy) and a customized healing abutment is fabricated chairside from flowable composite on a titanium temporary abutment (Spider Web technique), hand-tightened and left free of occlusal contact. No barrier membrane is used. Definitive loading is planned at three months.
Socket class C
Posterior extraction socket with little or no septal bone, so that primary stability must be obtained from the peripheral socket walls and/or the bone apical to the socket. Participants receive immediate implant placement with a chairside customized healing abutment.
절차: Immediate implant placement with customized healing abutment
Flapless atraumatic extraction with tooth sectioning and root-by-root removal, socket debridement and saline irrigation, followed by immediate placement of a MegaGen AnyRidge implant (MegaGen Implant Co., Daegu, South Korea; diameter 4.0-5.5 mm, length 8.5-11.5 mm) in a subcrestal position at the level of the septal bone. Where insertion torque of at least 35 Ncm and an implant stability quotient of at least 65 are achieved, the residual gap is grafted with equine-derived xenograft granules of 0.25 mm (Maggi Biotechnology, Andezeno, Italy) and a customized healing abutment is fabricated chairside from flowable composite on a titanium temporary abutment (Spider Web technique), hand-tightened and left free of occlusal contact. No barrier membrane is used. Definitive loading is planned at three months.

연구는 무엇을 측정합니까?

주요 결과 측정

결과 측정
측정값 설명
기간
Change in peri-implant soft-tissue volume
기간: Baseline, 3 months after placement (before loading), and 2 weeks after loading
Volumetric change of the peri-implant soft tissue relative to the pre-extraction baseline, measured in cubic millimetres by superimposition of intraoral scans.
Baseline, 3 months after placement (before loading), and 2 weeks after loading
Time to definitive loading
기간: Up to 6 months after implant placement
Interval in months from implant placement to definitive prosthetic loading, determined by the pre-loading radiographic assessment and the implant stability quotient.
Up to 6 months after implant placement
Implant stability quotient (ISQ)
기간: At implant placement and at 3 months after placement (before loading)
Implant stability measured by resonance frequency analysis on the ISQ scale from 1 to 100, where higher values indicate greater stability. Stability before loading is the criterion that determines whether the implant is loaded at three months.
At implant placement and at 3 months after placement (before loading)
Change in alveolar bone volume
기간: Baseline and 3 months after placement (before loading)
Volumetric change of the peri-implant alveolar bone relative to the pre-extraction baseline, measured in cubic millimetres on cone-beam computed tomography.
Baseline and 3 months after placement (before loading)

2차 결과 측정

결과 측정
측정값 설명
기간
Early wound healing
기간: Days 7 and 14 after surgery
Early wound healing graded on the Landry Wound Healing Index from 1 to 5, where higher values indicate better healing.
Days 7 and 14 after surgery
Analgesic requirement
기간: First 5 days after surgery
Number of participants taking the prescribed analgesic (ibuprofen L-arginine 600 mg twice daily as needed) after surgery.
First 5 days after surgery
Customized healing abutment complications
기간: From surgery to definitive loading, up to 4 months
Number of participants with abutment screw loosening, fracture of the composite healing abutment, or peri-implant infection, each recorded as present or absent.
From surgery to definitive loading, up to 4 months
Implant survival
기간: Up to 24 months after implant placement
Proportion of implants in situ and functional at the latest follow-up visit.
Up to 24 months after implant placement
Peri-implant bone corticalization
기간: 3 months after placement (before loading)
Degree of corticalization of the peri-implant bone, assessed on cone-beam computed tomography using a radiological corticalization index.
3 months after placement (before loading)

공동 작업자 및 조사자

여기에서 이 연구와 관련된 사람과 조직을 찾을 수 있습니다.

스폰서

Plovdiv Medical University

수사관

  • 수석 연구원: Tasho Gavrailov, DMD, PhD, Medical University of Plovdiv

연구 기록 날짜

이 날짜는 ClinicalTrials.gov에 대한 연구 기록 및 요약 결과 제출의 진행 상황을 추적합니다. 연구 기록 및 보고된 결과는 공개 웹사이트에 게시되기 전에 특정 품질 관리 기준을 충족하는지 확인하기 위해 국립 의학 도서관(NLM)에서 검토합니다.

연구 주요 날짜

연구 시작 (실제)

2024년 4월 1일

기본 완료 (추정된)

2026년 12월 1일

연구 완료 (추정된)

2026년 12월 1일

연구 등록 날짜

최초 제출

2026년 8월 31일

QC 기준을 충족하는 최초 제출

2026년 8월 31일

처음 게시됨 (실제)

2026년 9월 3일

연구 기록 업데이트

마지막 업데이트 게시됨 (실제)

2026년 9월 3일

QC 기준을 충족하는 마지막 업데이트 제출

2026년 8월 31일

마지막으로 확인됨

2026년 8월 1일

추가 정보

이 연구와 관련된 용어

키워드

추가 관련 MeSH 약관

기타 연구 ID 번호

  • NO-18/2025
  • R-KNE-55/10.11.2025 (기타 식별자: Committee on Scientific Ethics, Medical University of Plovdiv)

개별 참가자 데이터(IPD) 계획

개별 참가자 데이터(IPD)를 공유할 계획입니까?

아니요

IPD 계획 설명

Individual participant data will not be made publicly available. De-identified data supporting the published analyses are available from the corresponding author on reasonable request.

약물 및 장치 정보, 연구 문서

미국 FDA 규제 의약품 연구

아니

미국 FDA 규제 기기 제품 연구

아니

이 정보는 변경 없이 clinicaltrials.gov 웹사이트에서 직접 가져온 것입니다. 귀하의 연구 세부 정보를 변경, 제거 또는 업데이트하도록 요청하는 경우 register@clinicaltrials.gov. 문의하십시오. 변경 사항이 clinicaltrials.gov에 구현되는 즉시 저희 웹사이트에도 자동으로 업데이트됩니다. .

구독하다