Cette page a été traduite automatiquement et l'exactitude de la traduction n'est pas garantie. Veuillez vous référer au version anglaise pour un texte source.

Immediate Molar Implants With Customized Healing Abutments in Different Post-Extraction Socket Classes (IMPLA-CHA)

31 août 2026 mis à jour par: Plovdiv Medical University

Evaluation of the Success of Immediate Implants in the Molar Region Using Individually Fabricated Healing Abutments (Sulcus Formers) in Different Classes of Post-Extraction Sockets: A Prospective Cohort Study

Immediate implant placement into a fresh extraction socket shortens overall treatment time and reduces the number of surgical procedures, but the fit between the implant and the socket walls, and the resulting soft-tissue contour, differ substantially between socket types. This study evaluates immediate implant placement in the molar and posterior region combined with an individually fabricated (customized) healing abutment, or sulcus former, that seals the socket and shapes the emergence profile from the day of surgery.

Consecutive patients with a non-restorable posterior tooth are treated with flapless atraumatic extraction, immediate implant placement, grafting of the residual gap, and a chairside customized healing abutment fabricated on a titanium temporary abutment. Participants are grouped by the class of the post-extraction socket (A, B or C) according to the interradicular septal bone available for primary stability.

Outcomes are preservation of peri-implant soft-tissue volume assessed with an intraoral scanner, preservation of alveolar bone volume assessed on cone-beam computed tomography, implant stability measured by resonance frequency analysis (ISQ) at placement and before loading, and time to definitive loading. Early wound healing on the Landry index, the degree of bone corticalization before loading, implant survival, healing-abutment complications and analgesic requirement are also recorded.

Aperçu de l'étude

Statut

Recrutement

Les conditions

Intervention / Traitement

Type d'étude

Observationnel

Inscription (Estimé)

60

Contacts et emplacements

Cette section fournit les coordonnées de ceux qui mènent l'étude et des informations sur le lieu où cette étude est menée.

Coordonnées de l'étude

Lieux d'étude

  • Bulgarie
      • Plovdiv, Bulgarie, 4000
        • Recrutement
        • Department of Dental Implantology, Faculty of Dental Medicine, Medical University - Plovdiv
        • Contact:

Critères de participation

Les chercheurs recherchent des personnes qui correspondent à une certaine description, appelée critères d'éligibilité. Certains exemples de ces critères sont l'état de santé général d'une personne ou des traitements antérieurs.

Critère d'éligibilité

Âges éligibles pour étudier

  • Adulte
  • Adulte plus âgé

Accepte les volontaires sains

Non

Méthode d'échantillonnage

Échantillon non probabiliste

Population étudiée

Consecutive adult patients attending the Department of Dental Implantology, Faculty of Dental Medicine, Medical University - Plovdiv, with a non-restorable posterior (premolar or molar) tooth indicated for extraction and suitable for immediate implant placement.

La description

Inclusion Criteria:

  • Age 18 years or over
  • ASA physical status I or II
  • A non-restorable posterior tooth (premolar or molar) indicated for extraction: clinically unrestorable crown, advanced chronic periodontitis, failed or untreatable endodontic therapy, or vertical root fracture
  • Residual bone permitting implant placement with adequate primary stability
  • Able and willing to give written informed consent and to attend the follow-up schedule

Exclusion Criteria:

  • ASA physical status III or higher
  • Pregnancy or lactation
  • Uncontrolled diabetes mellitus
  • Smoking more than 10 cigarettes per day
  • Drug or alcohol abuse
  • Current or previous bisphosphonate or other antiresorptive therapy
  • Head and neck radiotherapy
  • Immunosuppression
  • Anticoagulant or antiplatelet therapy where the required pre-operative preparation is declined
  • Psychiatric conditions preventing compliance with the study procedures
  • Known titanium allergy
  • Severe bruxism
  • Acute infection at the surgical site
  • Advanced alveolar resorption precluding immediate implant placement

Plan d'étude

Cette section fournit des détails sur le plan d'étude, y compris la façon dont l'étude est conçue et ce que l'étude mesure.

Comment l'étude est-elle conçue ?

Détails de conception

Cohortes et interventions

Groupe / Cohorte
Intervention / Traitement
Socket class A
Posterior extraction socket in which the interradicular septal bone is sufficient to house the implant, giving circumferential bone contact along its coronal part. Because a molar socket is frequently 10 mm or more across, a residual void commonly remains around the implant within the socket. Participants receive immediate implant placement with a chairside customized healing abutment.
Procédure: Immediate implant placement with customized healing abutment
Flapless atraumatic extraction with tooth sectioning and root-by-root removal, socket debridement and saline irrigation, followed by immediate placement of a MegaGen AnyRidge implant (MegaGen Implant Co., Daegu, South Korea; diameter 4.0-5.5 mm, length 8.5-11.5 mm) in a subcrestal position at the level of the septal bone. Where insertion torque of at least 35 Ncm and an implant stability quotient of at least 65 are achieved, the residual gap is grafted with equine-derived xenograft granules of 0.25 mm (Maggi Biotechnology, Andezeno, Italy) and a customized healing abutment is fabricated chairside from flowable composite on a titanium temporary abutment (Spider Web technique), hand-tightened and left free of occlusal contact. No barrier membrane is used. Definitive loading is planned at three months.
Socket class B
Posterior extraction socket in which the septal bone is sufficient to stabilise the implant but not to house it, so that part of the implant surface faces the socket rather than bone. Participants receive immediate implant placement with a chairside customized healing abutment.
Procédure: Immediate implant placement with customized healing abutment
Flapless atraumatic extraction with tooth sectioning and root-by-root removal, socket debridement and saline irrigation, followed by immediate placement of a MegaGen AnyRidge implant (MegaGen Implant Co., Daegu, South Korea; diameter 4.0-5.5 mm, length 8.5-11.5 mm) in a subcrestal position at the level of the septal bone. Where insertion torque of at least 35 Ncm and an implant stability quotient of at least 65 are achieved, the residual gap is grafted with equine-derived xenograft granules of 0.25 mm (Maggi Biotechnology, Andezeno, Italy) and a customized healing abutment is fabricated chairside from flowable composite on a titanium temporary abutment (Spider Web technique), hand-tightened and left free of occlusal contact. No barrier membrane is used. Definitive loading is planned at three months.
Socket class C
Posterior extraction socket with little or no septal bone, so that primary stability must be obtained from the peripheral socket walls and/or the bone apical to the socket. Participants receive immediate implant placement with a chairside customized healing abutment.
Procédure: Immediate implant placement with customized healing abutment
Flapless atraumatic extraction with tooth sectioning and root-by-root removal, socket debridement and saline irrigation, followed by immediate placement of a MegaGen AnyRidge implant (MegaGen Implant Co., Daegu, South Korea; diameter 4.0-5.5 mm, length 8.5-11.5 mm) in a subcrestal position at the level of the septal bone. Where insertion torque of at least 35 Ncm and an implant stability quotient of at least 65 are achieved, the residual gap is grafted with equine-derived xenograft granules of 0.25 mm (Maggi Biotechnology, Andezeno, Italy) and a customized healing abutment is fabricated chairside from flowable composite on a titanium temporary abutment (Spider Web technique), hand-tightened and left free of occlusal contact. No barrier membrane is used. Definitive loading is planned at three months.

Que mesure l'étude ?

Principaux critères de jugement

Mesure des résultats
Description de la mesure
Délai
Change in peri-implant soft-tissue volume
Délai: Baseline, 3 months after placement (before loading), and 2 weeks after loading
Volumetric change of the peri-implant soft tissue relative to the pre-extraction baseline, measured in cubic millimetres by superimposition of intraoral scans.
Baseline, 3 months after placement (before loading), and 2 weeks after loading
Time to definitive loading
Délai: Up to 6 months after implant placement
Interval in months from implant placement to definitive prosthetic loading, determined by the pre-loading radiographic assessment and the implant stability quotient.
Up to 6 months after implant placement
Implant stability quotient (ISQ)
Délai: At implant placement and at 3 months after placement (before loading)
Implant stability measured by resonance frequency analysis on the ISQ scale from 1 to 100, where higher values indicate greater stability. Stability before loading is the criterion that determines whether the implant is loaded at three months.
At implant placement and at 3 months after placement (before loading)
Change in alveolar bone volume
Délai: Baseline and 3 months after placement (before loading)
Volumetric change of the peri-implant alveolar bone relative to the pre-extraction baseline, measured in cubic millimetres on cone-beam computed tomography.
Baseline and 3 months after placement (before loading)

Mesures de résultats secondaires

Mesure des résultats
Description de la mesure
Délai
Early wound healing
Délai: Days 7 and 14 after surgery
Early wound healing graded on the Landry Wound Healing Index from 1 to 5, where higher values indicate better healing.
Days 7 and 14 after surgery
Analgesic requirement
Délai: First 5 days after surgery
Number of participants taking the prescribed analgesic (ibuprofen L-arginine 600 mg twice daily as needed) after surgery.
First 5 days after surgery
Customized healing abutment complications
Délai: From surgery to definitive loading, up to 4 months
Number of participants with abutment screw loosening, fracture of the composite healing abutment, or peri-implant infection, each recorded as present or absent.
From surgery to definitive loading, up to 4 months
Implant survival
Délai: Up to 24 months after implant placement
Proportion of implants in situ and functional at the latest follow-up visit.
Up to 24 months after implant placement
Peri-implant bone corticalization
Délai: 3 months after placement (before loading)
Degree of corticalization of the peri-implant bone, assessed on cone-beam computed tomography using a radiological corticalization index.
3 months after placement (before loading)

Collaborateurs et enquêteurs

C'est ici que vous trouverez les personnes et les organisations impliquées dans cette étude.

Parrainer

Plovdiv Medical University

Les enquêteurs

  • Chercheur principal: Tasho Gavrailov, DMD, PhD, Medical University of Plovdiv

Dates d'enregistrement des études

Ces dates suivent la progression des dossiers d'étude et des soumissions de résultats sommaires à ClinicalTrials.gov. Les dossiers d'étude et les résultats rapportés sont examinés par la Bibliothèque nationale de médecine (NLM) pour s'assurer qu'ils répondent à des normes de contrôle de qualité spécifiques avant d'être publiés sur le site Web public.

Dates principales de l'étude

Début de l'étude (Réel)

1 avril 2024

Achèvement primaire (Estimé)

1 décembre 2026

Achèvement de l'étude (Estimé)

1 décembre 2026

Dates d'inscription aux études

Première soumission

31 août 2026

Première soumission répondant aux critères de contrôle qualité

31 août 2026

Première publication (Réel)

3 septembre 2026

Mises à jour des dossiers d'étude

Dernière mise à jour publiée (Réel)

3 septembre 2026

Dernière mise à jour soumise répondant aux critères de contrôle qualité

31 août 2026

Dernière vérification

1 août 2026

Plus d'information

Termes liés à cette étude

Mots clés

Termes MeSH pertinents supplémentaires

Autres numéros d'identification d'étude

  • NO-18/2025
  • R-KNE-55/10.11.2025 (Autre identifiant: Committee on Scientific Ethics, Medical University of Plovdiv)

Plan pour les données individuelles des participants (IPD)

Prévoyez-vous de partager les données individuelles des participants (DPI) ?

NON

Description du régime IPD

Individual participant data will not be made publicly available. De-identified data supporting the published analyses are available from the corresponding author on reasonable request.

Informations sur les médicaments et les dispositifs, documents d'étude

Étudie un produit pharmaceutique réglementé par la FDA américaine

Non

Étudie un produit d'appareil réglementé par la FDA américaine

Non

Ces informations ont été extraites directement du site Web clinicaltrials.gov sans aucune modification. Si vous avez des demandes de modification, de suppression ou de mise à jour des détails de votre étude, veuillez contacter register@clinicaltrials.gov. Dès qu'un changement est mis en œuvre sur clinicaltrials.gov, il sera également mis à jour automatiquement sur notre site Web .

S'abonner