Tämä sivu käännettiin automaattisesti, eikä käännösten tarkkuutta voida taata. Katso englanninkielinen versio lähdetekstiä varten.

Immediate Molar Implants With Customized Healing Abutments in Different Post-Extraction Socket Classes (IMPLA-CHA)

maanantai 31. elokuuta 2026 päivittänyt: Plovdiv Medical University

Evaluation of the Success of Immediate Implants in the Molar Region Using Individually Fabricated Healing Abutments (Sulcus Formers) in Different Classes of Post-Extraction Sockets: A Prospective Cohort Study

Immediate implant placement into a fresh extraction socket shortens overall treatment time and reduces the number of surgical procedures, but the fit between the implant and the socket walls, and the resulting soft-tissue contour, differ substantially between socket types. This study evaluates immediate implant placement in the molar and posterior region combined with an individually fabricated (customized) healing abutment, or sulcus former, that seals the socket and shapes the emergence profile from the day of surgery.

Consecutive patients with a non-restorable posterior tooth are treated with flapless atraumatic extraction, immediate implant placement, grafting of the residual gap, and a chairside customized healing abutment fabricated on a titanium temporary abutment. Participants are grouped by the class of the post-extraction socket (A, B or C) according to the interradicular septal bone available for primary stability.

Outcomes are preservation of peri-implant soft-tissue volume assessed with an intraoral scanner, preservation of alveolar bone volume assessed on cone-beam computed tomography, implant stability measured by resonance frequency analysis (ISQ) at placement and before loading, and time to definitive loading. Early wound healing on the Landry index, the degree of bone corticalization before loading, implant survival, healing-abutment complications and analgesic requirement are also recorded.

Tutkimuksen yleiskatsaus

Opintotyyppi

Havainnollistava

Ilmoittautuminen (Arvioitu)

60

Yhteystiedot ja paikat

Tässä osiossa on tutkimuksen suorittajien yhteystiedot ja tiedot siitä, missä tämä tutkimus suoritetaan.

Opiskeluyhteys

Opiskelupaikat

      • Plovdiv, Bulgaria, 4000
        • Rekrytointi
        • Department of Dental Implantology, Faculty of Dental Medicine, Medical University - Plovdiv
        • Ottaa yhteyttä:

Osallistumiskriteerit

Tutkijat etsivät ihmisiä, jotka sopivat tiettyyn kuvaukseen, jota kutsutaan kelpoisuuskriteereiksi. Joitakin esimerkkejä näistä kriteereistä ovat henkilön yleinen terveydentila tai aiemmat hoidot.

Kelpoisuusvaatimukset

Opintokelpoiset iät

  • Aikuinen
  • Vanhempi Aikuinen

Hyväksyy terveitä vapaaehtoisia

Ei

Näytteenottomenetelmä

Ei-todennäköisyysnäyte

Tutkimusväestö

Consecutive adult patients attending the Department of Dental Implantology, Faculty of Dental Medicine, Medical University - Plovdiv, with a non-restorable posterior (premolar or molar) tooth indicated for extraction and suitable for immediate implant placement.

Kuvaus

Inclusion Criteria:

  • Age 18 years or over
  • ASA physical status I or II
  • A non-restorable posterior tooth (premolar or molar) indicated for extraction: clinically unrestorable crown, advanced chronic periodontitis, failed or untreatable endodontic therapy, or vertical root fracture
  • Residual bone permitting implant placement with adequate primary stability
  • Able and willing to give written informed consent and to attend the follow-up schedule

Exclusion Criteria:

  • ASA physical status III or higher
  • Pregnancy or lactation
  • Uncontrolled diabetes mellitus
  • Smoking more than 10 cigarettes per day
  • Drug or alcohol abuse
  • Current or previous bisphosphonate or other antiresorptive therapy
  • Head and neck radiotherapy
  • Immunosuppression
  • Anticoagulant or antiplatelet therapy where the required pre-operative preparation is declined
  • Psychiatric conditions preventing compliance with the study procedures
  • Known titanium allergy
  • Severe bruxism
  • Acute infection at the surgical site
  • Advanced alveolar resorption precluding immediate implant placement

Opintosuunnitelma

Tässä osiossa on tietoja tutkimussuunnitelmasta, mukaan lukien kuinka tutkimus on suunniteltu ja mitä tutkimuksella mitataan.

Miten tutkimus on suunniteltu?

Suunnittelun yksityiskohdat

Kohortit ja interventiot

Ryhmä/Kohortti
Interventio / Hoito
Socket class A
Posterior extraction socket in which the interradicular septal bone is sufficient to house the implant, giving circumferential bone contact along its coronal part. Because a molar socket is frequently 10 mm or more across, a residual void commonly remains around the implant within the socket. Participants receive immediate implant placement with a chairside customized healing abutment.
Flapless atraumatic extraction with tooth sectioning and root-by-root removal, socket debridement and saline irrigation, followed by immediate placement of a MegaGen AnyRidge implant (MegaGen Implant Co., Daegu, South Korea; diameter 4.0-5.5 mm, length 8.5-11.5 mm) in a subcrestal position at the level of the septal bone. Where insertion torque of at least 35 Ncm and an implant stability quotient of at least 65 are achieved, the residual gap is grafted with equine-derived xenograft granules of 0.25 mm (Maggi Biotechnology, Andezeno, Italy) and a customized healing abutment is fabricated chairside from flowable composite on a titanium temporary abutment (Spider Web technique), hand-tightened and left free of occlusal contact. No barrier membrane is used. Definitive loading is planned at three months.
Socket class B
Posterior extraction socket in which the septal bone is sufficient to stabilise the implant but not to house it, so that part of the implant surface faces the socket rather than bone. Participants receive immediate implant placement with a chairside customized healing abutment.
Flapless atraumatic extraction with tooth sectioning and root-by-root removal, socket debridement and saline irrigation, followed by immediate placement of a MegaGen AnyRidge implant (MegaGen Implant Co., Daegu, South Korea; diameter 4.0-5.5 mm, length 8.5-11.5 mm) in a subcrestal position at the level of the septal bone. Where insertion torque of at least 35 Ncm and an implant stability quotient of at least 65 are achieved, the residual gap is grafted with equine-derived xenograft granules of 0.25 mm (Maggi Biotechnology, Andezeno, Italy) and a customized healing abutment is fabricated chairside from flowable composite on a titanium temporary abutment (Spider Web technique), hand-tightened and left free of occlusal contact. No barrier membrane is used. Definitive loading is planned at three months.
Socket class C
Posterior extraction socket with little or no septal bone, so that primary stability must be obtained from the peripheral socket walls and/or the bone apical to the socket. Participants receive immediate implant placement with a chairside customized healing abutment.
Flapless atraumatic extraction with tooth sectioning and root-by-root removal, socket debridement and saline irrigation, followed by immediate placement of a MegaGen AnyRidge implant (MegaGen Implant Co., Daegu, South Korea; diameter 4.0-5.5 mm, length 8.5-11.5 mm) in a subcrestal position at the level of the septal bone. Where insertion torque of at least 35 Ncm and an implant stability quotient of at least 65 are achieved, the residual gap is grafted with equine-derived xenograft granules of 0.25 mm (Maggi Biotechnology, Andezeno, Italy) and a customized healing abutment is fabricated chairside from flowable composite on a titanium temporary abutment (Spider Web technique), hand-tightened and left free of occlusal contact. No barrier membrane is used. Definitive loading is planned at three months.

Mitä tutkimuksessa mitataan?

Ensisijaiset tulostoimenpiteet

Tulosmittaus
Toimenpiteen kuvaus
Aikaikkuna
Change in peri-implant soft-tissue volume
Aikaikkuna: Baseline, 3 months after placement (before loading), and 2 weeks after loading
Volumetric change of the peri-implant soft tissue relative to the pre-extraction baseline, measured in cubic millimetres by superimposition of intraoral scans.
Baseline, 3 months after placement (before loading), and 2 weeks after loading
Time to definitive loading
Aikaikkuna: Up to 6 months after implant placement
Interval in months from implant placement to definitive prosthetic loading, determined by the pre-loading radiographic assessment and the implant stability quotient.
Up to 6 months after implant placement
Implant stability quotient (ISQ)
Aikaikkuna: At implant placement and at 3 months after placement (before loading)
Implant stability measured by resonance frequency analysis on the ISQ scale from 1 to 100, where higher values indicate greater stability. Stability before loading is the criterion that determines whether the implant is loaded at three months.
At implant placement and at 3 months after placement (before loading)
Change in alveolar bone volume
Aikaikkuna: Baseline and 3 months after placement (before loading)
Volumetric change of the peri-implant alveolar bone relative to the pre-extraction baseline, measured in cubic millimetres on cone-beam computed tomography.
Baseline and 3 months after placement (before loading)

Toissijaiset tulostoimenpiteet

Tulosmittaus
Toimenpiteen kuvaus
Aikaikkuna
Early wound healing
Aikaikkuna: Days 7 and 14 after surgery
Early wound healing graded on the Landry Wound Healing Index from 1 to 5, where higher values indicate better healing.
Days 7 and 14 after surgery
Analgesic requirement
Aikaikkuna: First 5 days after surgery
Number of participants taking the prescribed analgesic (ibuprofen L-arginine 600 mg twice daily as needed) after surgery.
First 5 days after surgery
Customized healing abutment complications
Aikaikkuna: From surgery to definitive loading, up to 4 months
Number of participants with abutment screw loosening, fracture of the composite healing abutment, or peri-implant infection, each recorded as present or absent.
From surgery to definitive loading, up to 4 months
Implant survival
Aikaikkuna: Up to 24 months after implant placement
Proportion of implants in situ and functional at the latest follow-up visit.
Up to 24 months after implant placement
Peri-implant bone corticalization
Aikaikkuna: 3 months after placement (before loading)
Degree of corticalization of the peri-implant bone, assessed on cone-beam computed tomography using a radiological corticalization index.
3 months after placement (before loading)

Yhteistyökumppanit ja tutkijat

Täältä löydät tähän tutkimukseen osallistuvat ihmiset ja organisaatiot.

Tutkijat

  • Päätutkija: Tasho Gavrailov, DMD, PhD, Medical University of Plovdiv

Opintojen ennätyspäivät

Nämä päivämäärät seuraavat ClinicalTrials.gov-sivustolle lähetettyjen tutkimustietueiden ja yhteenvetojen edistymistä. National Library of Medicine (NLM) tarkistaa tutkimustiedot ja raportoidut tulokset varmistaakseen, että ne täyttävät tietyt laadunvalvontastandardit, ennen kuin ne julkaistaan ​​julkisella verkkosivustolla.

Opi tärkeimmät päivämäärät

Opiskelun aloitus (Todellinen)

Maanantai 1. huhtikuuta 2024

Ensisijainen valmistuminen (Arvioitu)

Tiistai 1. joulukuuta 2026

Opintojen valmistuminen (Arvioitu)

Tiistai 1. joulukuuta 2026

Opintoihin ilmoittautumispäivät

Ensimmäinen lähetetty

Maanantai 31. elokuuta 2026

Ensimmäinen toimitettu, joka täytti QC-kriteerit

Maanantai 31. elokuuta 2026

Ensimmäinen Lähetetty (Todellinen)

Torstai 3. syyskuuta 2026

Tutkimustietojen päivitykset

Viimeisin päivitys julkaistu (Todellinen)

Torstai 3. syyskuuta 2026

Viimeisin lähetetty päivitys, joka täytti QC-kriteerit

Maanantai 31. elokuuta 2026

Viimeksi vahvistettu

Lauantai 1. elokuuta 2026

Lisää tietoa

Tähän tutkimukseen liittyvät termit

Yksittäisten osallistujien tietojen suunnitelma (IPD)

Aiotko jakaa yksittäisten osallistujien tietoja (IPD)?

EI

IPD-suunnitelman kuvaus

Individual participant data will not be made publicly available. De-identified data supporting the published analyses are available from the corresponding author on reasonable request.

Lääke- ja laitetiedot, tutkimusasiakirjat

Tutkii yhdysvaltalaista FDA sääntelemää lääkevalmistetta

Ei

Tutkii yhdysvaltalaista FDA sääntelemää laitetuotetta

Ei

Nämä tiedot haettiin suoraan verkkosivustolta clinicaltrials.gov ilman muutoksia. Jos sinulla on pyyntöjä muuttaa, poistaa tai päivittää tutkimustietojasi, ota yhteyttä register@clinicaltrials.gov. Heti kun muutos on otettu käyttöön osoitteessa clinicaltrials.gov, se päivitetään automaattisesti myös verkkosivustollemme .

Tilaa