Denna sida har översatts automatiskt och översättningens korrekthet kan inte garanteras. Vänligen se engelsk version för en källtext.

Immediate Molar Implants With Customized Healing Abutments in Different Post-Extraction Socket Classes (IMPLA-CHA)

31 augusti 2026 uppdaterad av: Plovdiv Medical University

Evaluation of the Success of Immediate Implants in the Molar Region Using Individually Fabricated Healing Abutments (Sulcus Formers) in Different Classes of Post-Extraction Sockets: A Prospective Cohort Study

Immediate implant placement into a fresh extraction socket shortens overall treatment time and reduces the number of surgical procedures, but the fit between the implant and the socket walls, and the resulting soft-tissue contour, differ substantially between socket types. This study evaluates immediate implant placement in the molar and posterior region combined with an individually fabricated (customized) healing abutment, or sulcus former, that seals the socket and shapes the emergence profile from the day of surgery.

Consecutive patients with a non-restorable posterior tooth are treated with flapless atraumatic extraction, immediate implant placement, grafting of the residual gap, and a chairside customized healing abutment fabricated on a titanium temporary abutment. Participants are grouped by the class of the post-extraction socket (A, B or C) according to the interradicular septal bone available for primary stability.

Outcomes are preservation of peri-implant soft-tissue volume assessed with an intraoral scanner, preservation of alveolar bone volume assessed on cone-beam computed tomography, implant stability measured by resonance frequency analysis (ISQ) at placement and before loading, and time to definitive loading. Early wound healing on the Landry index, the degree of bone corticalization before loading, implant survival, healing-abutment complications and analgesic requirement are also recorded.

Studieöversikt

Studietyp

Observationell

Inskrivning (Beräknad)

60

Kontakter och platser

Det här avsnittet innehåller kontaktuppgifter för dem som genomför studien och information om var denna studie genomförs.

Studiekontakt

Studieorter

      • Plovdiv, Bulgarien, 4000
        • Rekrytering
        • Department of Dental Implantology, Faculty of Dental Medicine, Medical University - Plovdiv
        • Kontakt:

Deltagandekriterier

Forskare letar efter personer som passar en viss beskrivning, så kallade behörighetskriterier. Några exempel på dessa kriterier är en persons allmänna hälsotillstånd eller tidigare behandlingar.

Urvalskriterier

Åldrar som är berättigade till studier

  • Vuxen
  • Äldre vuxen

Tar emot friska volontärer

Nej

Testmetod

Icke-sannolikhetsprov

Studera befolkning

Consecutive adult patients attending the Department of Dental Implantology, Faculty of Dental Medicine, Medical University - Plovdiv, with a non-restorable posterior (premolar or molar) tooth indicated for extraction and suitable for immediate implant placement.

Beskrivning

Inclusion Criteria:

  • Age 18 years or over
  • ASA physical status I or II
  • A non-restorable posterior tooth (premolar or molar) indicated for extraction: clinically unrestorable crown, advanced chronic periodontitis, failed or untreatable endodontic therapy, or vertical root fracture
  • Residual bone permitting implant placement with adequate primary stability
  • Able and willing to give written informed consent and to attend the follow-up schedule

Exclusion Criteria:

  • ASA physical status III or higher
  • Pregnancy or lactation
  • Uncontrolled diabetes mellitus
  • Smoking more than 10 cigarettes per day
  • Drug or alcohol abuse
  • Current or previous bisphosphonate or other antiresorptive therapy
  • Head and neck radiotherapy
  • Immunosuppression
  • Anticoagulant or antiplatelet therapy where the required pre-operative preparation is declined
  • Psychiatric conditions preventing compliance with the study procedures
  • Known titanium allergy
  • Severe bruxism
  • Acute infection at the surgical site
  • Advanced alveolar resorption precluding immediate implant placement

Studieplan

Det här avsnittet ger detaljer om studieplanen, inklusive hur studien är utformad och vad studien mäter.

Hur är studien utformad?

Designdetaljer

Kohorter och interventioner

Grupp / Kohort
Intervention / Behandling
Socket class A
Posterior extraction socket in which the interradicular septal bone is sufficient to house the implant, giving circumferential bone contact along its coronal part. Because a molar socket is frequently 10 mm or more across, a residual void commonly remains around the implant within the socket. Participants receive immediate implant placement with a chairside customized healing abutment.
Flapless atraumatic extraction with tooth sectioning and root-by-root removal, socket debridement and saline irrigation, followed by immediate placement of a MegaGen AnyRidge implant (MegaGen Implant Co., Daegu, South Korea; diameter 4.0-5.5 mm, length 8.5-11.5 mm) in a subcrestal position at the level of the septal bone. Where insertion torque of at least 35 Ncm and an implant stability quotient of at least 65 are achieved, the residual gap is grafted with equine-derived xenograft granules of 0.25 mm (Maggi Biotechnology, Andezeno, Italy) and a customized healing abutment is fabricated chairside from flowable composite on a titanium temporary abutment (Spider Web technique), hand-tightened and left free of occlusal contact. No barrier membrane is used. Definitive loading is planned at three months.
Socket class B
Posterior extraction socket in which the septal bone is sufficient to stabilise the implant but not to house it, so that part of the implant surface faces the socket rather than bone. Participants receive immediate implant placement with a chairside customized healing abutment.
Flapless atraumatic extraction with tooth sectioning and root-by-root removal, socket debridement and saline irrigation, followed by immediate placement of a MegaGen AnyRidge implant (MegaGen Implant Co., Daegu, South Korea; diameter 4.0-5.5 mm, length 8.5-11.5 mm) in a subcrestal position at the level of the septal bone. Where insertion torque of at least 35 Ncm and an implant stability quotient of at least 65 are achieved, the residual gap is grafted with equine-derived xenograft granules of 0.25 mm (Maggi Biotechnology, Andezeno, Italy) and a customized healing abutment is fabricated chairside from flowable composite on a titanium temporary abutment (Spider Web technique), hand-tightened and left free of occlusal contact. No barrier membrane is used. Definitive loading is planned at three months.
Socket class C
Posterior extraction socket with little or no septal bone, so that primary stability must be obtained from the peripheral socket walls and/or the bone apical to the socket. Participants receive immediate implant placement with a chairside customized healing abutment.
Flapless atraumatic extraction with tooth sectioning and root-by-root removal, socket debridement and saline irrigation, followed by immediate placement of a MegaGen AnyRidge implant (MegaGen Implant Co., Daegu, South Korea; diameter 4.0-5.5 mm, length 8.5-11.5 mm) in a subcrestal position at the level of the septal bone. Where insertion torque of at least 35 Ncm and an implant stability quotient of at least 65 are achieved, the residual gap is grafted with equine-derived xenograft granules of 0.25 mm (Maggi Biotechnology, Andezeno, Italy) and a customized healing abutment is fabricated chairside from flowable composite on a titanium temporary abutment (Spider Web technique), hand-tightened and left free of occlusal contact. No barrier membrane is used. Definitive loading is planned at three months.

Vad mäter studien?

Primära resultatmått

Resultatmått
Åtgärdsbeskrivning
Tidsram
Change in peri-implant soft-tissue volume
Tidsram: Baseline, 3 months after placement (before loading), and 2 weeks after loading
Volumetric change of the peri-implant soft tissue relative to the pre-extraction baseline, measured in cubic millimetres by superimposition of intraoral scans.
Baseline, 3 months after placement (before loading), and 2 weeks after loading
Time to definitive loading
Tidsram: Up to 6 months after implant placement
Interval in months from implant placement to definitive prosthetic loading, determined by the pre-loading radiographic assessment and the implant stability quotient.
Up to 6 months after implant placement
Implant stability quotient (ISQ)
Tidsram: At implant placement and at 3 months after placement (before loading)
Implant stability measured by resonance frequency analysis on the ISQ scale from 1 to 100, where higher values indicate greater stability. Stability before loading is the criterion that determines whether the implant is loaded at three months.
At implant placement and at 3 months after placement (before loading)
Change in alveolar bone volume
Tidsram: Baseline and 3 months after placement (before loading)
Volumetric change of the peri-implant alveolar bone relative to the pre-extraction baseline, measured in cubic millimetres on cone-beam computed tomography.
Baseline and 3 months after placement (before loading)

Sekundära resultatmått

Resultatmått
Åtgärdsbeskrivning
Tidsram
Early wound healing
Tidsram: Days 7 and 14 after surgery
Early wound healing graded on the Landry Wound Healing Index from 1 to 5, where higher values indicate better healing.
Days 7 and 14 after surgery
Analgesic requirement
Tidsram: First 5 days after surgery
Number of participants taking the prescribed analgesic (ibuprofen L-arginine 600 mg twice daily as needed) after surgery.
First 5 days after surgery
Customized healing abutment complications
Tidsram: From surgery to definitive loading, up to 4 months
Number of participants with abutment screw loosening, fracture of the composite healing abutment, or peri-implant infection, each recorded as present or absent.
From surgery to definitive loading, up to 4 months
Implant survival
Tidsram: Up to 24 months after implant placement
Proportion of implants in situ and functional at the latest follow-up visit.
Up to 24 months after implant placement
Peri-implant bone corticalization
Tidsram: 3 months after placement (before loading)
Degree of corticalization of the peri-implant bone, assessed on cone-beam computed tomography using a radiological corticalization index.
3 months after placement (before loading)

Samarbetspartners och utredare

Det är här du hittar personer och organisationer som är involverade i denna studie.

Utredare

  • Huvudutredare: Tasho Gavrailov, DMD, PhD, Medical University of Plovdiv

Studieavstämningsdatum

Dessa datum spårar framstegen för inlämningar av studieposter och sammanfattande resultat till ClinicalTrials.gov. Studieposter och rapporterade resultat granskas av National Library of Medicine (NLM) för att säkerställa att de uppfyller specifika kvalitetskontrollstandarder innan de publiceras på den offentliga webbplatsen.

Studera stora datum

Studiestart (Faktisk)

1 april 2024

Primärt slutförande (Beräknad)

1 december 2026

Avslutad studie (Beräknad)

1 december 2026

Studieregistreringsdatum

Först inskickad

31 augusti 2026

Först inskickad som uppfyllde QC-kriterierna

31 augusti 2026

Första postat (Faktisk)

3 september 2026

Uppdateringar av studier

Senaste uppdatering publicerad (Faktisk)

3 september 2026

Senaste inskickade uppdateringen som uppfyllde QC-kriterierna

31 augusti 2026

Senast verifierad

1 augusti 2026

Mer information

Termer relaterade till denna studie

Plan för individuella deltagardata (IPD)

Planerar du att dela individuella deltagardata (IPD)?

NEJ

IPD-planbeskrivning

Individual participant data will not be made publicly available. De-identified data supporting the published analyses are available from the corresponding author on reasonable request.

Läkemedels- och apparatinformation, studiedokument

Studerar en amerikansk FDA-reglerad läkemedelsprodukt

Nej

Studerar en amerikansk FDA-reglerad produktprodukt

Nej

Denna information hämtades direkt från webbplatsen clinicaltrials.gov utan några ändringar. Om du har några önskemål om att ändra, ta bort eller uppdatera dina studieuppgifter, vänligen kontakta register@clinicaltrials.gov. Så snart en ändring har implementerats på clinicaltrials.gov, kommer denna att uppdateras automatiskt även på vår webbplats .

Prenumerera