Tato stránka byla automaticky přeložena a přesnost překladu není zaručena. Podívejte se prosím na anglická verze pro zdrojový text.

Prefabricated CAD/CAM PEEK Crowns For Primary Molars Restoration

28. května 2026 aktualizováno: Arab International University

Evaluation of Minimally Prepared CAD/CAM Polyetheretherketone (PEEK) Crowns Efficacy in Restoring Primary Molars

This Split-mouth randomized clinical trial aims to evaluate CAD/CAM prefabricated Polyether ether ketone crowns for primary molars restoration after pulpotomy compared to Stainless steel crowns Over follow-up periods of 3, 6, and 12 months, the sample included 60 children aged 5-9 years who had bilateral mandibular second primary molars.

Each child received a pulpotomy treatment followed by the placement of a stainless steel crown on one side and a PEEK crown on the contralateral side, distributed randomly.

Clinical parameters were subsequently evaluated during the three follow-up periods, including the gingival index, plaque index, bleeding on probing index, restoration retention and integrity, marginal adaptation, color stability, and both parental and child satisfaction.

Přehled studie

Detailní popis

Interest in the esthetic aspect of pediatric dental treatment has increased among both children and parents, as children's self-perception is strongly influenced by the appearance of their teeth from an early age. Most esthetic restorative options require extensive tooth preparation compared with stainless steel crowns (SSCs). However, only limited studies have investigated conservative esthetic alternatives for primary molars.

This randomized controlled clinical trial aimed to evaluate the clinical effectiveness of CAD-CAM prefabricated esthetic PEEK crowns compared with stainless steel crowns (SSCs) in restoring primary mandibular second molars after pulpotomy. Clinical performance was assessed according to restoration retention and integrity, gingival health, plaque accumulation, bleeding on probing, marginal adaptation, color stability, and child/parent satisfaction over follow-up periods of 3, 6, and 12 months.

The sample was randomly allocated using the website: randomization.com

A total crowns were randomly distributed into four groups (n=20 per group):

(A): Prefabricated CAD/CAM PEEK crowns with 0.2 mm thickness (B): Prefabricated CAD/CAM PEEK crowns with 0.4 mm thickness (C): CAD/CAM fabricated PEEK crowns prepared according to NuSmile recommendations (D): Stainless steel crowns (SSC). The study included healthy, cooperative children aged 5-9 years requiring pulpotomy treatment for mandibular second primary.

Clinical Procedure

Clinical and radiographic examinations are performed to confirm the indication for pulpotomy treatment, followed by completion of the study form. Local anesthesia and rubber dam isolation are carried out, and pulpotomy is performed according to the conventional technique described by Dean (2016). The tooth is then restored with glass ionomer cement.

After cement setting, conservative tooth preparation is performed using diamond burs with 1-2 mm occlusal reduction. For Groups I, II, and IV, proximal reduction is completed with minimal preparation. In Group III, tooth preparation follows NuSmile recommendations, including occlusal reduction, proximal opening, crown reduction, and a 1 mm subgingival finish line.

For Groups I, II, and IV, the appropriate crown size is selected, checked for marginal adaptation and proximal contacts, then cemented using Fuji I glass ionomer cement. Excess cement is removed using a dental explorer and dental floss.

For the CAD/CAM fabricated PEEK group, a silicone impression is taken and scanned digitally. Crowns are designed using Exocad software and fabricated with CAD-CAM technology. After polishing and internal surface conditioning with aluminum oxide particles, the crown is tried in, cemented with Fuji I glass ionomer cement, and excess cement is removed.

Clinical parameters are evaluated immediately after crown cementation for directly measurable baseline variables and during the three follow-up periods (after 3, 6, 12 months), including the gingival index, plaque index, bleeding on probing index, restoration retention and integrity, marginal adaptation, color stability, and both parental and child satisfaction.

Typ studie

Intervenční

Zápis (Odhadovaný)

60

Fáze

  • Nelze použít

Kontakty a umístění

Tato část poskytuje kontaktní údaje pro ty, kteří studii provádějí, a informace o tom, kde se tato studie provádí.

Studijní místa

      • Damascus, Sýrie
        • School of Dental Medicine

Kritéria účasti

Výzkumníci hledají lidi, kteří odpovídají určitému popisu, kterému se říká kritéria způsobilosti. Některé příklady těchto kritérií jsou celkový zdravotní stav osoby nebo předchozí léčba.

Kritéria způsobilosti

Věk způsobilý ke studiu

  • Dítě

Přijímá zdravé dobrovolníky

Ne

Popis

Inclusion Criteria:

  1. Healthy children aged 5-9 years.
  2. Children requiring pulpotomy of mandibular second primary molars.
  3. Cooperative children rated as positive or definitely positive on the Frankl behavior scale.
  4. No acute or chronic abscess at the anesthesia site.

Exclusion Criteria:

  1. Root resorption exceeding the apical third.
  2. Non-restorable teeth.
  3. Presence of swelling, fistula, or acute or chronic pulpitis.

Studijní plán

Tato část poskytuje podrobnosti o studijním plánu, včetně toho, jak je studie navržena a co studie měří.

Jak je studie koncipována?

Detaily designu

  • Primární účel: Léčba
  • Přidělení: Randomizované
  • Intervenční model: Crossover Assignment
  • Maskování: Singl

Zbraně a zásahy

Skupina účastníků / Arm
Intervence / Léčba
Experimentální: Prefabricated PEEK crowns of 0.2 mm thickness
Minimally prepared teeth restored with prefabricated PEEK crowns of 0.2 mm wall thickness.
The pulpotomized molar assigned to experimental group will be received A Polyether ether ketone prefabricated crown with 0.2mm thickness on one side of mandibular arch, and the other side will be received a Stainless steel crown as control group.
Experimentální: Prefabricated PEEK crowns of 0.4 mm wall thickness
Minimally prepared teeth restored with prefabricated PEEK crowns of 0.4 mm wall thickness.
The pulpotomized molar assigned to experimental group will be received A Polyether ether ketone prefabricated crown with 0.4mm thickness on one side of mandibular arch, and the other side will be received a Stainless steel crown as control group.
Experimentální: CAD/CAM-fabricated PEEK crowns
Teeth receiving comprehensive preparation and restored with CAD/CAM-fabricated PEEK crowns following the NuSmile preparation protocol.
The pulpotomized molar assigned to experimental group will be received A CAD/CAM fabricated Polyether ether ketone crown on one side of mandibular arch, and the other side will be received a Stainless steel crown as control group.
Aktivní komparátor: Stainless steel crowns
Minimally prepared teeth restored with prefabricated stainless steel crowns, as the positive control group.
The pulpotomized molar assigned to control group will be received a Stainless steel crown as control group on one side of mandibular arch, and the other side will be received one of the arm 1, 2, or 3

Co je měření studie?

Primární výstupní opatření

Měření výsledku
Popis opatření
Časové okno
Gingival Index
Časové okno: Baseline, 3 months, 6 months, and 12 months postoperatively

0 = No gingival inflammation.

  1. = Mild inflammation with slight changes in color and texture affecting part of the marginal gingiva or papilla.
  2. = Mild inflammation with changes in color and texture involving the entire marginal gingiva or papilla.
  3. = Moderate gingival inflammation with obvious redness, surface glazing, edema, and/or enlargement of the marginal gingiva or papilla.
  4. = Severe gingival inflammation with marked redness, edema and/or enlargement of the marginal gingiva or papilla, spontaneous bleeding, and ulceration.
Baseline, 3 months, 6 months, and 12 months postoperatively
Plaque Index
Časové okno: Baseline, 3 months, 6 months, and 12 months postoperatively

0 = No plaque accumulation around the gingival margin.

  1. = Slight plaque accumulation detected only by passing a probe.
  2. = Moderate plaque accumulation visible to the naked eye.
  3. = Heavy plaque accumulation on the crown surface, gingiva, and interdental areas.
Baseline, 3 months, 6 months, and 12 months postoperatively
Bleeding on Probing
Časové okno: Baseline, 3 months, 6 months, and 12 months postoperatively

Bleeding on probing is assessed using a Williams periodontal probe inserted into the gingival sulcus around each crowned tooth. Four sites (mesial, distal, buccal, and lingual) are examined, and bleeding is evaluated 10 seconds after probing as follows:

(-) No bleeding. (+) Bleeding present.

Baseline, 3 months, 6 months, and 12 months postoperatively
Wong-Baker Faces Scale
Časové okno: Baseline, 3 months, 6 months, 12 months postoperatively

A Wong-Baker Faces Scale consisting of six expressive faces is used, ranging from "no hurts" to "hurts worst," to facilitate the child's selection of the appropriate face. The scale ranges from 0 to 10.

The child is given a questionnaire displaying the faces immediately after crown placement and is asked to choose the face that best represents their feeling at that moment. The child indicates the selected face by pointing to it, and the response is recorded in the study form.

Baseline, 3 months, 6 months, 12 months postoperatively

Sekundární výstupní opatření

Měření výsledku
Popis opatření
Časové okno
Color Stability
Časové okno: 3 months, 6 months, 12 months postoperatively

Color stability is assessed using a shade guide as a reference standard. The crown color is compared with the shade guide at each follow-up visit (3, 6, and 12 months) according to the following criteria:

0 = No color change.

  1. = Slight change from the original color.
  2. = Unacceptable color change.
3 months, 6 months, 12 months postoperatively
Restoration retention and integrity
Časové okno: 3 months, 6 months, 12 months postoperatively

The clinical condition of the crown is evaluated during follow-up visits according to the following criteria:

0 = No visible fracture.

  1. = Minor crown fracture that is repairable.
  2. = Major crown fracture that can still be repaired.
  3. = Crown loss and exclusion from the study sample.
3 months, 6 months, 12 months postoperatively
Marginal Adaptation
Časové okno: 3 months, 6 months, 12 months postoperatively

Marginal adaptation discrepancies were evaluated clinically using a sharp explorer and direct visual examination under dental operating light According to the modified United States Public Health Service (USPHS) criteria; (A): An Alpha grade represented a clinically ideal restoration with excellent marginal adaptation, no detectable gap on exploratory examination.

(B): A Bravo grade indicated a clinically acceptable restoration with a slight marginal discrepancy detectable by an explorer, but without dentin exposure.

(C): A Charlie grade was assigned to restorations that were clinically unacceptable due to a definite marginal gap, with exposed dentin.

(D): A Delta grade denotes the worst clinical condition, characterized by gross marginal failure, loss of retention, or other major defects, for which complete replacement of the restoration is required.

3 months, 6 months, 12 months postoperatively
Patient/Parent Satisfaction
Časové okno: 3 months, 6 months, 12 months postoperatively

The child and one parent are asked about their satisfaction with the crowns regarding esthetics and function, and the responses are recorded in the patient form. Evaluation is performed as follows:

  1. = Completely satisfied with both esthetic and functional outcomes.
  2. = Satisfied with esthetic and functional outcomes with a minor remark.
  3. = Minor criticism without negative clinical effects or esthetic defects.
  4. = Desire for improvement in esthetic and functional aspects.
  5. = Completely dissatisfied.
3 months, 6 months, 12 months postoperatively

Spolupracovníci a vyšetřovatelé

Zde najdete lidi a organizace zapojené do této studie.

Spolupracovníci

Vyšetřovatelé

  • Vrchní vyšetřovatel: Bushra Munzer Shamma, MSc, DDS., Damascus University
  • Studijní židle: Mohannad Laflouf, PhD, MSc, DDS., Damascus University
  • Ředitel studie: Saleh Al Kurdi, PhD, MSc, DDS., Arab International University

Publikace a užitečné odkazy

Osoba odpovědná za zadávání informací o studiu tyto publikace poskytuje dobrovolně. Mohou se týkat čehokoli, co souvisí se studiem.

Termíny studijních záznamů

Tato data sledují průběh záznamů studie a předkládání souhrnných výsledků na ClinicalTrials.gov. Záznamy ze studií a hlášené výsledky jsou před zveřejněním na veřejné webové stránce přezkoumány Národní lékařskou knihovnou (NLM), aby se ujistily, že splňují specifické standardy kontroly kvality.

Hlavní termíny studia

Začátek studia (Aktuální)

2. dubna 2024

Primární dokončení (Aktuální)

10. prosince 2025

Dokončení studie (Odhadovaný)

26. srpna 2026

Termíny zápisu do studia

První předloženo

22. května 2026

První předloženo, které splnilo kritéria kontroly kvality

28. května 2026

První zveřejněno (Aktuální)

1. června 2026

Aktualizace studijních záznamů

Poslední zveřejněná aktualizace (Aktuální)

1. června 2026

Odeslaná poslední aktualizace, která splnila kritéria kontroly kvality

28. května 2026

Naposledy ověřeno

1. května 2026

Více informací

Termíny související s touto studií

Další identifikační čísla studie

  • 106/SRC/Sep.23.2024

Plán pro data jednotlivých účastníků (IPD)

Plánujete sdílet data jednotlivých účastníků (IPD)?

NE

Informace o lécích a zařízeních, studijní dokumenty

Studuje lékový produkt regulovaný americkým FDA

Ne

Studuje produkt zařízení regulovaný americkým úřadem FDA

Ne

Tyto informace byly beze změn načteny přímo z webu clinicaltrials.gov. Máte-li jakékoli požadavky na změnu, odstranění nebo aktualizaci podrobností studie, kontaktujte prosím register@clinicaltrials.gov. Jakmile bude změna implementována na clinicaltrials.gov, bude automaticky aktualizována i na našem webu .

Předplatit