Cette page a été traduite automatiquement et l'exactitude de la traduction n'est pas garantie. Veuillez vous référer au version anglaise pour un texte source.

Clinical Evaluation of the Access Socket Flexible Socket for Transtibial Prosthesis (AS-TT)

Transtibial amputation significantly impacts patient autonomy and quality of life, primarily due to the limitations of conventional rigid sockets, which restrict comfort and joint range of motion. The Access Socket (AS) is an innovative prosthetic socket combining a rigid carbon-fiber structure in key load-bearing areas with flexible urethane-resin (ProtheFLEX®) zones in regions typically rigid in conventional sockets. This hybrid design aims to improve comfort and pressure distribution while preserving the mechanical properties required for ambulation.

The AS has already demonstrated benefits in transfemoral amputees and is now reimbursed in France for that population. A preliminary uncontrolled study in 12 transtibial amputees suggested significant improvements in perceived function, comfort, satisfaction, and mobility.

This multicenter, randomized, open-label, two-arm crossover study aims to compare the (AS) with the standard rigid socket (RS) in 25 adults with transtibial amputation. Participants will wear each socket for approximately 4 weeks (after a 1-2 week adaptation period) in a randomized order. The primary outcome is the Patient Specific Functional Scale (PSFS). Secondary outcomes include comfort (SCS), satisfaction (OPUS), psychosocial adjustment (TAPES-R), mobility (PLUS-M), prosthesis utility (PEQ-U), and the proportion of patients electing to keep the AS at study completion.

Aperçu de l'étude

Description détaillée

Background. Lower-limb amputation affects more than 7,500 people annually in France, with approximately 50% at the transtibial level. The socket is the critical interface between the residual limb and the prosthesis, transmitting mechanical forces while needing to remain comfortable. Currently, only RS (carbon or resin) are listed on the French reimbursable products list (LPPR) for transtibial amputation. Documented limitations of rigid sockets include restricted knee flexion, walking discomfort in challenging environments, donning difficulties, and suboptimal pressure distribution that does not adapt to residual-limb volume changes.

Investigational device. The AS follows the same molding and shaping principles as the standard RS but differs in two manufacturing steps: (1) carbon fibers are placed only on lateral, postero-inferior, and inferior areas to provide structural rigidity; (2) stratification uses urethane resin (ProtheFLEX®, already used in medical-device manufacturing) instead of epoxy or acrylic resin, creating soft zones in regions typically rigid in conventional sockets.

Comparator. Both sockets are manufactured from the same plaster mold to ensure strictly identical internal geometry. Only the material structure (carbon/urethane distribution) differs; all other prosthetic components (intermediate piece, prosthetic foot) are identical.

Design rationale. A double-blind design is not feasible because participants can perceive differences in socket rigidity and prosthesis weight. The crossover design controls for between-subject variability and order effects.

Sample size. Based on the preliminary study (Patient Specific Functional Scale (PSFS) standard deviation 1.74), to detect a difference of 1.3 points (the PSFS MDC₉₀ for 3 items) with 80% power and α=0.05, 19 participants are required. 25 will be enrolled to account for dropouts and to provide a more representative sample for secondary endpoints.

Visits. Four study visits over approximately 14-21 weeks per participant: inclusion (V0), evaluation after first socket period (V1), evaluation after second socket period (V2), and an optional follow-up visit (V3) one month later if the participant elects to keep the AS.

Type d'étude

Interventionnel

Inscription (Estimé)

25

Phase

  • N'est pas applicable

Contacts et emplacements

Cette section fournit les coordonnées de ceux qui mènent l'étude et des informations sur le lieu où cette étude est menée.

Coordonnées de l'étude

Sauvegarde des contacts de l'étude

Lieux d'étude

      • Clamart, France, 92140
        • Recrutement
        • Hôpital National d'Instruction des Armées (HNIA) Percy
        • Chercheur principal:
          • Marie Thomas-Pohl, MD
        • Contact:
      • Freyming-Merlebach, France, 57804
        • Recrutement
        • Hôpital Filieris de Freyming-Merlebach
        • Contact:
        • Chercheur principal:
          • Catherine Achour
      • Grenoble, France, 38434
        • Recrutement
        • CHU Grenoble Alpes - Hôpital Sud
        • Contact:
        • Chercheur principal:
          • Solène MAret, MD
        • Sous-enquêteur:
          • Phillipe Escobar, MD
      • Nancy, France, 54000
      • Paris, France, 75007
        • Recrutement
        • Insititution Nationale des Invalides
        • Contact:

Critères de participation

Les chercheurs recherchent des personnes qui correspondent à une certaine description, appelée critères d'éligibilité. Certains exemples de ces critères sont l'état de santé général d'une personne ou des traitements antérieurs.

Critère d'éligibilité

Âges éligibles pour étudier

  • Adulte
  • Adulte plus âgé

Accepte les volontaires sains

Non

La description

Inclusion Criteria:

  • Unilateral or bilateral transtibial amputation
  • Currently fitted with a definitive carbon rigid socket
  • Any residual-limb shape
  • Any etiology
  • Able to understand simple instructions, read, write, and provide informed consent - or able to be accompanied by a trusted person in case of inability to read/write autonomously
  • Provided free written informed consent
  • Aged 18 years or older
  • Affiliated to a social security system

Exclusion Criteria:

  • Use of hydroalcoholic solution (HAS) for socket donning
  • Currently fitted with a provisional socket
  • Neurological pathology limiting capacity to participate in activities
  • Orthopedic pathology limiting capacity to participate in activities
  • Pregnant or breastfeeding women
  • Minors
  • Persons not under legal protection or unable to express consent
  • Persons under guardianship or curatorship
  • Persons under judicial protection

Plan d'étude

Cette section fournit des détails sur le plan d'étude, y compris la façon dont l'étude est conçue et ce que l'étude mesure.

Comment l'étude est-elle conçue ?

Détails de conception

  • Objectif principal: Traitement
  • Répartition: Randomisé
  • Modèle interventionnel: Affectation croisée
  • Masquage: Aucun (étiquette ouverte)

Armes et Interventions

Groupe de participants / Bras
Intervention / Traitement
Comparateur actif: Group 1 (RS -> AS)
Participants wear their standard rigid socket (RS) for 4 weeks, complete evaluation, then switch to the Access Socket (AS) for 1-2 weeks of adaptation followed by 4 weeks of wear, with a second evaluation.
Hybrid prosthetic socket combining a rigid carbon-fiber structure in load-bearing areas (lateral, postero-inferior, inferior) with flexible urethane-resin (ProtheFLEX®) zones in regions typically rigid in conventional sockets. Manufactured from the same plaster mold as the rigid socket to ensure identical internal geometry.
Conventional definitive carbon-fiber rigid socket, currently the only socket type reimbursed in France for transtibial amputation (LPPR-listed). Standard of care comparator.
Comparateur actif: Group 2 (AS -> RS)
Participants receive the Access Socket (AS) first, with 1-2 weeks of adaptation followed by 4 weeks of wear and evaluation. They then switch to the standard rigid socket (RS) for 1-2 weeks of adaptation and 4 weeks of wear, with a second evaluation.
Hybrid prosthetic socket combining a rigid carbon-fiber structure in load-bearing areas (lateral, postero-inferior, inferior) with flexible urethane-resin (ProtheFLEX®) zones in regions typically rigid in conventional sockets. Manufactured from the same plaster mold as the rigid socket to ensure identical internal geometry.
Conventional definitive carbon-fiber rigid socket, currently the only socket type reimbursed in France for transtibial amputation (LPPR-listed). Standard of care comparator.

Que mesure l'étude ?

Principaux critères de jugement

Mesure des résultats
Description de la mesure
Délai
Patient Specific Functional Scale (PSFS) score
Délai: One time at the end of each 4-week wear period (V1, V2 and V3)
Patient-centered self-report tool. The patient identifies 3-5 specific activities they have difficulty performing, then rates their ability on a 0-10 scale (0 = unable to perform, 10 = able to perform at pre-injury level). The final score is the mean of the ratings
One time at the end of each 4-week wear period (V1, V2 and V3)

Mesures de résultats secondaires

Mesure des résultats
Description de la mesure
Délai
Socket Comfort Scale (SCS) score
Délai: One time at the end of each 4-week wear period (V1, V2 and V3)
0-10 numerical rating of socket comfort (0 = least comfortable imaginable, 10 = most comfortable imaginable)
One time at the end of each 4-week wear period (V1, V2 and V3)
Orthotics Prosthetics Users Survey (OPUS) score
Délai: One time at the end of each 4-week wear period (V1, V2 and V3)
Self-report instrument evaluating functional outcomes and quality of life specifically for orthosis and prosthesis users. Assesses lower-limb functional status, health-related quality of life, satisfaction with the device, and satisfaction with services. The higher the score, the more favorable the result for the device
One time at the end of each 4-week wear period (V1, V2 and V3)
Trinity Amputation and Prosthesis Experience Scale - Revised (TAPES-R) score
Délai: One time at the end of each 4-week wear period (V1, V2 and V3)
33-item multidimensional questionnaire evaluating psychosocial adjustment to amputation and prosthesis use, including general adjustment, social adjustment, activity restriction, and prosthesis satisfaction. The higher the global score, the more favorable the result for the device
One time at the end of each 4-week wear period (V1, V2 and V3)
Prosthesis Evaluation Questionnaire - Utility subscale (PEQ-U) score
Délai: One time at the end of each 4-week wear period (V1, V2 and V3)
The score is calculated as the mean of the 8 items in the subscale. Each item is rated on a Visual Analogue Scale (VAS) from 0 to 100. The total score ranges from 0 to 100, where higher scores indicate a better outcome (greater satisfaction and prosthesis utility)
One time at the end of each 4-week wear period (V1, V2 and V3)
Proportion of participants electing to keep the Access Socket at study completion
Délai: Through study completion, an average of 10 weeks
Percentage of participants who choose the AS over the RS at the end of the study, reported with 95% confidence interval. Participants are not informed of this option until the end of the study to avoid judgment bias
Through study completion, an average of 10 weeks

Collaborateurs et enquêteurs

C'est ici que vous trouverez les personnes et les organisations impliquées dans cette étude.

Dates d'enregistrement des études

Ces dates suivent la progression des dossiers d'étude et des soumissions de résultats sommaires à ClinicalTrials.gov. Les dossiers d'étude et les résultats rapportés sont examinés par la Bibliothèque nationale de médecine (NLM) pour s'assurer qu'ils répondent à des normes de contrôle de qualité spécifiques avant d'être publiés sur le site Web public.

Dates principales de l'étude

Début de l'étude (Réel)

27 avril 2026

Achèvement primaire (Estimé)

27 avril 2027

Achèvement de l'étude (Estimé)

30 octobre 2027

Dates d'inscription aux études

Première soumission

5 mai 2026

Première soumission répondant aux critères de contrôle qualité

13 mai 2026

Première publication (Réel)

18 mai 2026

Mises à jour des dossiers d'étude

Dernière mise à jour publiée (Réel)

18 mai 2026

Dernière mise à jour soumise répondant aux critères de contrôle qualité

13 mai 2026

Dernière vérification

1 mai 2026

Plus d'information

Termes liés à cette étude

Plan pour les données individuelles des participants (IPD)

Prévoyez-vous de partager les données individuelles des participants (DPI) ?

NON

Description du régime IPD

: Individual participant data will not be shared. Aggregated study results will be published in scientific journals and a summary report will be transmitted to the CPP within 12 months of study completion

Informations sur les médicaments et les dispositifs, documents d'étude

Étudie un produit pharmaceutique réglementé par la FDA américaine

Non

Étudie un produit d'appareil réglementé par la FDA américaine

Non

Ces informations ont été extraites directement du site Web clinicaltrials.gov sans aucune modification. Si vous avez des demandes de modification, de suppression ou de mise à jour des détails de votre étude, veuillez contacter register@clinicaltrials.gov. Dès qu'un changement est mis en œuvre sur clinicaltrials.gov, il sera également mis à jour automatiquement sur notre site Web .

S'abonner