Cette page a été traduite automatiquement et l'exactitude de la traduction n'est pas garantie. Veuillez vous référer au version anglaise pour un texte source.

Clinical Performance of CAD/CAM Occlusal Splints Fabricated With or Without a Wax Bite Registration in Healthy Adults (Splint)

24 juillet 2026 mis à jour par: Radboud University Medical Center

Clinical Performance of CAD/CAM Occlusal Splints Fabricated With or Without Wax Bite Registration: A Randomized Crossover Clinical Trial

Occlusal splints are commonly used to manage sleep bruxism, temporomandibular disorders, and tooth wear. Traditionally, a wax bite registration is used during the fabrication of CAD/CAM occlusal splints to determine the vertical dimension and occlusal relationship. New digital techniques allow the splint to be designed without a wax bite registration by virtually increasing the vertical dimension based on maximal intercuspation.

This randomized crossover study compares these two fabrication workflows in healthy volunteers. Participants will wear both splints in random order. The study will evaluate patient-reported comfort and clinical performance, including occlusal contacts, force distribution, splint stability, and the occlusal adjustments required during insertion

Aperçu de l'étude

Statut

Pas encore de recrutement

Les conditions

Intervention / Traitement

Description détaillée

Occlusal splints are widely used in the management of sleep bruxism, temporomandibular disorders, and tooth wear. The increasing implementation of CAD/CAM technology has improved the efficiency and reproducibility of occlusal splint fabrication. Conventionally, the vertical dimension and occlusal relationship are determined using a wax bite registration. Recent developments in digital dentistry now allow the vertical dimension to be increased virtually based on the patient's maximal intercuspation, eliminating the need for an additional wax bite registration.

Although both fabrication workflows are currently used in clinical practice, there is limited clinical evidence comparing their performance. It remains unclear whether omitting the conventional wax bite registration affects the initial clinical performance of CAD/CAM occlusal splints at insertion, before any occlusal adjustments are performed. Potential differences may exist in patient comfort, splint stability, occlusal contacts, force distribution, and the number of occlusal adjustments required. In addition, little is known about differences in patient-reported outcomes, including comfort, perceived occlusion, stability, and overall satisfaction during the period of splint use.

Type d'étude

Interventionnel

Inscription (Estimé)

30

Phase

  • N'est pas applicable

Contacts et emplacements

Cette section fournit les coordonnées de ceux qui mènent l'étude et des informations sur le lieu où cette étude est menée.

Coordonnées de l'étude

Sauvegarde des contacts de l'étude

Lieux d'étude

Critères de participation

Les chercheurs recherchent des personnes qui correspondent à une certaine description, appelée critères d'éligibilité. Certains exemples de ces critères sont l'état de santé général d'une personne ou des traitements antérieurs.

Critère d'éligibilité

Âges éligibles pour étudier

  • Adulte

Accepte les volontaires sains

Oui

Population étudiée

The population for this prospective clinical randomized crossover trial, will consist of young adult participants aged 18 to 45, which study Dentistry, or are a co-worker or patient at the Dentistry Department of Radboudumc Nijmegen.

La description

Inclusion criteria:

  • Subjects aged 18-45 years
  • Subjects with an ASA physical status classification of I-III.
  • Subjects with healthy complete dentitions (except for congenitally missing teeth (agenesis), extractions of wisdom teeth, or tooth extractions for the purpose of orthodontic treatment in the past)
  • Subjects willing and able to participate in the study
  • Subjects willing to provide written informed consent for their participation in the study

Exclusion Criteria:

  • Subjects presenting with active dental disease, extensive restorations affecting the occlusion, or other oral conditions that may interfere with the assessment of the occlusal splints
  • Subjects with a history of autoimmune disorders
  • Subjects with known allergies to acrylic materials
  • Subjects with severe allergies manifested by a history of anaphylaxis or those with severe, chronic allergies (e.g., asthma) and subjects with an active infection of any kind at the time of enrollment
  • Subjects who are pregnant or lactating
  • Subjects enrolled in another investigational clinical trial

Plan d'étude

Cette section fournit des détails sur le plan d'étude, y compris la façon dont l'étude est conçue et ce que l'étude mesure.

Comment l'étude est-elle conçue ?

Détails de conception

  • Objectif principal: Autre
  • Répartition: Randomisé
  • Modèle interventionnel: Affectation croisée
  • Masquage: Seul

Armes et Interventions

Groupe de participants / Bras
Intervention / Traitement
Expérimental: Sequence B
Participants receive a CAD/CAM occlusal splint fabricated using a virtual increase of the vertical dimension (without a wax bite registration) for 3 weeks, followed by a CAD/CAM occlusal splint fabricated using a conventional wax bite registration for 3 weeks.
Dispositif: Occlusal splint fabricated using a virtual increase of the vertical dimension
Intervention 1: CAD/CAM occlusal splint fabricated using a virtual increase of the vertical dimension CAD/CAM-milled occlusal splint fabricated from PMMA using a fully digital workflow. The splint is designed by virtually increasing the vertical dimension based on the participant's maximal intercuspation, without the use of a conventional wax bite registration. Participants will wear the splint overnight for 3 weeks (minimum 6 hours per night).
Dispositif: Occlusal splint fabricated using a conventional wax bite registration
Intervention 2: CAD/CAM occlusal splint fabricated using a conventional wax bite registration CAD/CAM-milled occlusal splint fabricated from the same PMMA material using a conventional wax bite registration to determine the vertical dimension and occlusal relationship during the digital design process. Participants will wear the splint overnight for 3 weeks (minimum 6 hours per night).
Expérimental: Sequence A
Participants receive a CAD/CAM occlusal splint fabricated using a conventional wax bite registration for 3 weeks, followed by a CAD/CAM occlusal splint fabricated using a virtual increase of the vertical dimension (without a wax bite registration) for 3 weeks.
Dispositif: Occlusal splint fabricated using a virtual increase of the vertical dimension
Intervention 1: CAD/CAM occlusal splint fabricated using a virtual increase of the vertical dimension CAD/CAM-milled occlusal splint fabricated from PMMA using a fully digital workflow. The splint is designed by virtually increasing the vertical dimension based on the participant's maximal intercuspation, without the use of a conventional wax bite registration. Participants will wear the splint overnight for 3 weeks (minimum 6 hours per night).
Dispositif: Occlusal splint fabricated using a conventional wax bite registration
Intervention 2: CAD/CAM occlusal splint fabricated using a conventional wax bite registration CAD/CAM-milled occlusal splint fabricated from the same PMMA material using a conventional wax bite registration to determine the vertical dimension and occlusal relationship during the digital design process. Participants will wear the splint overnight for 3 weeks (minimum 6 hours per night).

Que mesure l'étude ?

Principaux critères de jugement

Mesure des résultats
Description de la mesure
Délai
Participant-reported comfort
Délai: From enrollment to the end of treatment at 7 weeks
Self-reported wear comfort by filling in a questionnaire. This scale measures the comfort of the occlusal splint (0-10), where "very uncomfortable" represents the worst experience (lowest score) and "very comfortable" represents the best experience (highest score). Minimum Value: very uncomfortable, Maximum Value: very comfortable. Higher Scores Mean: better comfort (more comfort)
From enrollment to the end of treatment at 7 weeks

Collaborateurs et enquêteurs

C'est ici que vous trouverez les personnes et les organisations impliquées dans cette étude.

Parrainer

Radboud University Medical Center

Les enquêteurs

  • Chercheur principal: Sabine Mechelse, MSc, Radboud University Medical Center

Dates d'enregistrement des études

Ces dates suivent la progression des dossiers d'étude et des soumissions de résultats sommaires à ClinicalTrials.gov. Les dossiers d'étude et les résultats rapportés sont examinés par la Bibliothèque nationale de médecine (NLM) pour s'assurer qu'ils répondent à des normes de contrôle de qualité spécifiques avant d'être publiés sur le site Web public.

Dates principales de l'étude

Début de l'étude (Estimé)

1 septembre 2026

Achèvement primaire (Estimé)

31 janvier 2027

Achèvement de l'étude (Estimé)

31 janvier 2027

Dates d'inscription aux études

Première soumission

17 juillet 2026

Première soumission répondant aux critères de contrôle qualité

17 juillet 2026

Première publication (Réel)

22 juillet 2026

Mises à jour des dossiers d'étude

Dernière mise à jour publiée (Réel)

27 juillet 2026

Dernière mise à jour soumise répondant aux critères de contrôle qualité

24 juillet 2026

Dernière vérification

1 juillet 2026

Plus d'information

Termes liés à cette étude

Mots clés

Termes MeSH pertinents supplémentaires

Autres numéros d'identification d'étude

  • R0147841A

Plan pour les données individuelles des participants (IPD)

Prévoyez-vous de partager les données individuelles des participants (DPI) ?

OUI

Description du régime IPD

Specific IPD datasets, such as those underlying published results, will be shared. However, this sharing will occur under strict conditions to ensure data security and participant confidentiality. The data will be pseudonymized, using a secure key management system to separate identifiers from research data. Access will require appropriate agreements, ensuring compliance with ethical and legal standards, and will be granted only for research purposes aligning with the study's objectives.

Délai de partage IPD

Beginning 3 months and ending 3 years after the publication of results.

Critères d'accès au partage IPD

To ensure confidentiality and compliance, access to IPD will be restricted to authorized personnel involved in the research process, including the Principal Investigator (PI), specific research team members, external collaborators, and regulatory authorities. Access is based on each individual's role and necessity for the research. The PI will have full access to the IPD, pseudonymized data, and supporting documents for data management and reporting. Research team members, such as co- investigators, assistants, and statisticians, will have access to the data necessary for their assigned tasks. Access will be controlled through formal data requests, Data Use Agreements, and secure platforms. Pseudonymization ensures participant confidentiality while enabling the sharing of valuable research data for scientific progress.

Type d'informations de prise en charge du partage d'IPD

  • PROTOCOLE D'ÉTUDE
  • SÈVE
  • CIF

Informations sur les médicaments et les dispositifs, documents d'étude

Étudie un produit pharmaceutique réglementé par la FDA américaine

Non

Étudie un produit d'appareil réglementé par la FDA américaine

Non

Ces informations ont été extraites directement du site Web clinicaltrials.gov sans aucune modification. Si vous avez des demandes de modification, de suppression ou de mise à jour des détails de votre étude, veuillez contacter register@clinicaltrials.gov. Dès qu'un changement est mis en œuvre sur clinicaltrials.gov, il sera également mis à jour automatiquement sur notre site Web .

S'abonner