Clinical Efficacy of Different Fissure Sealant Materials in the Newly Erupted Non-Carious First Permanent Molars
Clinical Efficacy of Different Fissure Sealant Materials in the Newly Erupted Non-Carious First Permanent Molars: A Randomized Controlled Clinical Trial
The aim of this study is to compare the clinical retention rates, marginal adaptation, marginal discoloration and secondary caries formation of two different types of resin-modified glass ionomers (Fuji® II LC; Clinpro™ XT Varnish) and giomer-containing fissure sealant materials (Beautifil Flow) with glass ionomer-containing fissure sealant material (Fuji Triage®) used on newly erupted non-carious first permanent molars as a fissure sealant.
The study included 384 teeth belonging to 182 children, aged between 5 to 9 years old, who have two newly erupted mandibular permanent first molars.
調査の概要
状態
条件
詳細な説明
研究の種類
入学 (実際)
段階
- 適用できない
連絡先と場所
研究場所
-
-
-
Izmir、七面鳥
- Izmir Katip Celebi University
-
-
参加基準
適格基準
就学可能な年齢
健康ボランティアの受け入れ
受講資格のある性別
説明
Inclusion Criteria:
- Children who have two newly erupted non-carious mandibular permanent first molars that fissure sealant is indicated,
- Newly erupted first permanent molars show scores of 0 (Sound tooth surface)-1(First visual change in enamel) according to ICDAS II,
- Newly erupted first permanent molars show scores between 0-13 by using DIAGNOdent device,
- Children who haven't any systemic disease that prevents the application,
- Cooperative children who allowed the clinical applications.
Exclusion Criteria:
- Teeth with proximal and initial caries,
- Teeth with applied fissure sealant,
- Teeth with developmental defects such as hypoplasia and restorations,
- Non-cooperative children who don't allow the clinical applications,
- Children and parents who denied the participation in the follow-up appointments.
研究計画
研究はどのように設計されていますか？
デザインの詳細
- 主な目的：処理
- 割り当て：ランダム化
- 介入モデル：並列代入
- マスキング：ダブル
武器と介入
参加者グループ / アーム |
介入・治療 |
|---|---|
|
実験的：Group 1 (Fuji II LC-Fuji Triage)
In Group 1, newly erupted mandibular permanent first molars were sealed with resin-modified glass ionomers containing fissure sealant material (Fuji® II LC, GC Corporation, Tokyo, Japan) (test 1).
The other first molars were sealed with glass ionomers containing fissure sealant material (Fuji Triage®, GC Corporation, Tokyo, Japan) (control).
|
Fuji® II LC is a resin modified glass ionomer contained, fluoride releasing and light-cured material. Since the product is tolerant to moisture and saliva, it's used for fissure sealant of newly erupted teeth. Test 1 newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.The tooth surface was rinsed with water and dried. Thereafter, Fuji® II LC was applied to the pits and fissures on the tooth surface using a brush. Then, the varnish was applied and cured according to the manufacturer's instructions.
他の名前：
Fuji Triage® is a new generation glass ionomer containing with low viscosity, high fluoride content and light curing materials. Since the product is tolerant of moisture and saliva, it is used for fissure sealant of newly erupted teeth. Control newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.Then the tooth surface was rinsed with water and dried. Thereafter,Fuji Triage® was applied to the pits and fissures on the tooth surface using a brush. Thereafter, the varnish was applied and cured according to the manufacturer's instructions.
他の名前：
|
|
実験的：Group 2 (Clinpro XT Varnish-Fuji Triage)
In Group 2, newly erupted mandibular permanent first molars were sealed with resin-modified glass ionomers containing fissure sealant material (Clinpro™ XT Varnish, 3M ESPE, St. Pauls, Miniapolis, MN, USA) (test 2).
The other first molars were sealed with glass ionomers containing fissure sealant material (Fuji Triage®, GC Corporation, Tokyo, Japan) (control).
|
Fuji Triage® is a new generation glass ionomer containing with low viscosity, high fluoride content and light curing materials. Since the product is tolerant of moisture and saliva, it is used for fissure sealant of newly erupted teeth. Control newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.Then the tooth surface was rinsed with water and dried. Thereafter,Fuji Triage® was applied to the pits and fissures on the tooth surface using a brush. Thereafter, the varnish was applied and cured according to the manufacturer's instructions.
他の名前：
Clinpro™ XT Varnish is a resin modified glass ionomer containing, fluoride-releasing, light-cured varnish. Since the product is tolerant to moisture and saliva, it is used for fissure sealant of newly erupted teeth. The product can be recharged with fluoride using fluoride-containing products. Test 2 newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 35% phosphoric acid was applied to all surfaces of the tooth for 15 seconds.Then the tooth surface was rinsed with water and dried. Thereafter, Clinpro™ XT Varnish was applied in compliance with the manufacturers' instructions.
他の名前：
|
|
実験的：Group 3 (Beautiful Flow- Fuji Triage)
In Group 3, newly erupted mandibular permanent first molars were sealed with Giomer containing fissure sealant material (Beautifil Flow, Shofu, Kyoto, Japan) (test 3).
The other first molars were sealed with glass ionomers containing fissure sealant material (Fuji Triage®, GC Corporation, Tokyo, Japan) (control).
|
Fuji Triage® is a new generation glass ionomer containing with low viscosity, high fluoride content and light curing materials. Since the product is tolerant of moisture and saliva, it is used for fissure sealant of newly erupted teeth. Control newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.Then the tooth surface was rinsed with water and dried. Thereafter,Fuji Triage® was applied to the pits and fissures on the tooth surface using a brush. Thereafter, the varnish was applied and cured according to the manufacturer's instructions.
他の名前：
Beautiful Flow is a Giomer contained, fluoride releasing and light cured material. The product contains pre-reacted glass ionomer particles (PRG). It is a high water resistant material. It is used for fissure sealant. Test 3 newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 7% phosphoric acid was applied to all surfaces of the tooth for 10 seconds. Then the tooth surface was rinsed with water and dried. Afterwards, a two-stage self-etch adhesive system was applied. Thereafter, Beautiful Flow was applied in compliance with the manufacturers' instructions.
他の名前：
|
この研究は何を測定していますか？
主要な結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
The assessment of clinical retention rates of fissure sealants applied to newly erupted permanent first molars.
時間枠：18 months after the clinical applications
|
The primary outcome of the study was the assessment of clinical retention rates at 18th months.
|
18 months after the clinical applications
|
|
The assessment of marginal adaptation rates of fissure sealants applied to newly erupted permanent first molars.
時間枠：18 months after the clinical applications
|
The primary outcome of the study was the assessment of marginal adaptation rates at 18th months.
|
18 months after the clinical applications
|
|
The assessment of marginal discoloration rates of fissure sealants applied to newly erupted permanent first molars.
時間枠：18 months after the clinical applications
|
The primary outcome of the study was the assessment of marginal discoloration rates at 18th months.
|
18 months after the clinical applications
|
|
The assessment of secondary caries rates of fissure sealants applied to newly erupted permanent first molars.
時間枠：18 months after the clinical applications
|
The primary outcome of the study was the assessment of secondary caries rates at 18th months.
|
18 months after the clinical applications
|
二次結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
The assessment of remineralization capacity using DIAGNOdent device
時間枠：18 months after the clinical applications
|
The secondary outcome of the study was the assessment of remineralization capacity using DIAGNOdent, at 18th months.
|
18 months after the clinical applications
|
協力者と研究者
研究記録日
主要日程の研究
研究開始 (実際)
一次修了 (実際)
研究の完了 (実際)
試験登録日
最初に提出
QC基準を満たした最初の提出物
最初の投稿 (実際)
学習記録の更新
投稿された最後の更新 (実際)
QC基準を満たした最後の更新が送信されました
最終確認日
詳しくは
本研究に関する用語
キーワード
その他の研究ID番号
- 2018-TDU-DİŞF-0050
個々の参加者データ (IPD) の計画
個々の参加者データ (IPD) を共有する予定はありますか?
医薬品およびデバイス情報、研究文書
米国FDA規制医薬品の研究
米国FDA規制機器製品の研究
この情報は、Web サイト clinicaltrials.gov から変更なしで直接取得したものです。研究の詳細を変更、削除、または更新するリクエストがある場合は、register@clinicaltrials.gov。 までご連絡ください。 clinicaltrials.gov に変更が加えられるとすぐに、ウェブサイトでも自動的に更新されます。