Clinical Efficacy of Different Fissure Sealant Materials in the Newly Erupted Non-Carious First Permanent Molars
Clinical Efficacy of Different Fissure Sealant Materials in the Newly Erupted Non-Carious First Permanent Molars: A Randomized Controlled Clinical Trial
The aim of this study is to compare the clinical retention rates, marginal adaptation, marginal discoloration and secondary caries formation of two different types of resin-modified glass ionomers (Fuji® II LC; Clinpro™ XT Varnish) and giomer-containing fissure sealant materials (Beautifil Flow) with glass ionomer-containing fissure sealant material (Fuji Triage®) used on newly erupted non-carious first permanent molars as a fissure sealant.
The study included 384 teeth belonging to 182 children, aged between 5 to 9 years old, who have two newly erupted mandibular permanent first molars.
Studieoversigt
Status
Betingelser
Intervention / Behandling
Detaljeret beskrivelse
Undersøgelsestype
Tilmelding (Faktiske)
Fase
- Ikke anvendelig
Kontakter og lokationer
Studiesteder
-
-
-
Izmir, Kalkun
- Izmir Katip Celebi University
-
-
Deltagelseskriterier
Berettigelseskriterier
Aldre berettiget til at studere
Tager imod sunde frivillige
Køn, der er berettiget til at studere
Beskrivelse
Inclusion Criteria:
- Children who have two newly erupted non-carious mandibular permanent first molars that fissure sealant is indicated,
- Newly erupted first permanent molars show scores of 0 (Sound tooth surface)-1(First visual change in enamel) according to ICDAS II,
- Newly erupted first permanent molars show scores between 0-13 by using DIAGNOdent device,
- Children who haven't any systemic disease that prevents the application,
- Cooperative children who allowed the clinical applications.
Exclusion Criteria:
- Teeth with proximal and initial caries,
- Teeth with applied fissure sealant,
- Teeth with developmental defects such as hypoplasia and restorations,
- Non-cooperative children who don't allow the clinical applications,
- Children and parents who denied the participation in the follow-up appointments.
Studieplan
Hvordan er undersøgelsen tilrettelagt?
Design detaljer
- Primært formål: Behandling
- Tildeling: Randomiseret
- Interventionel model: Parallel tildeling
- Maskning: Dobbelt
Våben og indgreb
Deltagergruppe / Arm |
Intervention / Behandling |
|---|---|
|
Eksperimentel: Group 1 (Fuji II LC-Fuji Triage)
In Group 1, newly erupted mandibular permanent first molars were sealed with resin-modified glass ionomers containing fissure sealant material (Fuji® II LC, GC Corporation, Tokyo, Japan) (test 1).
The other first molars were sealed with glass ionomers containing fissure sealant material (Fuji Triage®, GC Corporation, Tokyo, Japan) (control).
|
Fuji® II LC is a resin modified glass ionomer contained, fluoride releasing and light-cured material. Since the product is tolerant to moisture and saliva, it's used for fissure sealant of newly erupted teeth. Test 1 newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.The tooth surface was rinsed with water and dried. Thereafter, Fuji® II LC was applied to the pits and fissures on the tooth surface using a brush. Then, the varnish was applied and cured according to the manufacturer's instructions.
Andre navne:
Fuji Triage® is a new generation glass ionomer containing with low viscosity, high fluoride content and light curing materials. Since the product is tolerant of moisture and saliva, it is used for fissure sealant of newly erupted teeth. Control newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.Then the tooth surface was rinsed with water and dried. Thereafter,Fuji Triage® was applied to the pits and fissures on the tooth surface using a brush. Thereafter, the varnish was applied and cured according to the manufacturer's instructions.
Andre navne:
|
|
Eksperimentel: Group 2 (Clinpro XT Varnish-Fuji Triage)
In Group 2, newly erupted mandibular permanent first molars were sealed with resin-modified glass ionomers containing fissure sealant material (Clinpro™ XT Varnish, 3M ESPE, St. Pauls, Miniapolis, MN, USA) (test 2).
The other first molars were sealed with glass ionomers containing fissure sealant material (Fuji Triage®, GC Corporation, Tokyo, Japan) (control).
|
Fuji Triage® is a new generation glass ionomer containing with low viscosity, high fluoride content and light curing materials. Since the product is tolerant of moisture and saliva, it is used for fissure sealant of newly erupted teeth. Control newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.Then the tooth surface was rinsed with water and dried. Thereafter,Fuji Triage® was applied to the pits and fissures on the tooth surface using a brush. Thereafter, the varnish was applied and cured according to the manufacturer's instructions.
Andre navne:
Clinpro™ XT Varnish is a resin modified glass ionomer containing, fluoride-releasing, light-cured varnish. Since the product is tolerant to moisture and saliva, it is used for fissure sealant of newly erupted teeth. The product can be recharged with fluoride using fluoride-containing products. Test 2 newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 35% phosphoric acid was applied to all surfaces of the tooth for 15 seconds.Then the tooth surface was rinsed with water and dried. Thereafter, Clinpro™ XT Varnish was applied in compliance with the manufacturers' instructions.
Andre navne:
|
|
Eksperimentel: Group 3 (Beautiful Flow- Fuji Triage)
In Group 3, newly erupted mandibular permanent first molars were sealed with Giomer containing fissure sealant material (Beautifil Flow, Shofu, Kyoto, Japan) (test 3).
The other first molars were sealed with glass ionomers containing fissure sealant material (Fuji Triage®, GC Corporation, Tokyo, Japan) (control).
|
Fuji Triage® is a new generation glass ionomer containing with low viscosity, high fluoride content and light curing materials. Since the product is tolerant of moisture and saliva, it is used for fissure sealant of newly erupted teeth. Control newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.Then the tooth surface was rinsed with water and dried. Thereafter,Fuji Triage® was applied to the pits and fissures on the tooth surface using a brush. Thereafter, the varnish was applied and cured according to the manufacturer's instructions.
Andre navne:
Beautiful Flow is a Giomer contained, fluoride releasing and light cured material. The product contains pre-reacted glass ionomer particles (PRG). It is a high water resistant material. It is used for fissure sealant. Test 3 newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 7% phosphoric acid was applied to all surfaces of the tooth for 10 seconds. Then the tooth surface was rinsed with water and dried. Afterwards, a two-stage self-etch adhesive system was applied. Thereafter, Beautiful Flow was applied in compliance with the manufacturers' instructions.
Andre navne:
|
Hvad måler undersøgelsen?
Primære resultatmål
Resultatmål |
Foranstaltningsbeskrivelse |
Tidsramme |
|---|---|---|
|
The assessment of clinical retention rates of fissure sealants applied to newly erupted permanent first molars.
Tidsramme: 18 months after the clinical applications
|
The primary outcome of the study was the assessment of clinical retention rates at 18th months.
|
18 months after the clinical applications
|
|
The assessment of marginal adaptation rates of fissure sealants applied to newly erupted permanent first molars.
Tidsramme: 18 months after the clinical applications
|
The primary outcome of the study was the assessment of marginal adaptation rates at 18th months.
|
18 months after the clinical applications
|
|
The assessment of marginal discoloration rates of fissure sealants applied to newly erupted permanent first molars.
Tidsramme: 18 months after the clinical applications
|
The primary outcome of the study was the assessment of marginal discoloration rates at 18th months.
|
18 months after the clinical applications
|
|
The assessment of secondary caries rates of fissure sealants applied to newly erupted permanent first molars.
Tidsramme: 18 months after the clinical applications
|
The primary outcome of the study was the assessment of secondary caries rates at 18th months.
|
18 months after the clinical applications
|
Sekundære resultatmål
Resultatmål |
Foranstaltningsbeskrivelse |
Tidsramme |
|---|---|---|
|
The assessment of remineralization capacity using DIAGNOdent device
Tidsramme: 18 months after the clinical applications
|
The secondary outcome of the study was the assessment of remineralization capacity using DIAGNOdent, at 18th months.
|
18 months after the clinical applications
|
Samarbejdspartnere og efterforskere
Sponsor
Datoer for undersøgelser
Studer store datoer
Studiestart (Faktiske)
Primær færdiggørelse (Faktiske)
Studieafslutning (Faktiske)
Datoer for studieregistrering
Først indsendt
Først indsendt, der opfyldte QC-kriterier
Først opslået (Faktiske)
Opdateringer af undersøgelsesjournaler
Sidste opdatering sendt (Faktiske)
Sidste opdatering indsendt, der opfyldte kvalitetskontrolkriterier
Sidst verificeret
Mere information
Begreber relateret til denne undersøgelse
Nøgleord
Andre undersøgelses-id-numre
- 2018-TDU-DİŞF-0050
Plan for individuelle deltagerdata (IPD)
Planlægger du at dele individuelle deltagerdata (IPD)?
Lægemiddel- og udstyrsoplysninger, undersøgelsesdokumenter
Studerer et amerikansk FDA-reguleret lægemiddelprodukt
Studerer et amerikansk FDA-reguleret enhedsprodukt
Disse oplysninger blev hentet direkte fra webstedet clinicaltrials.gov uden ændringer. Hvis du har nogen anmodninger om at ændre, fjerne eller opdatere dine undersøgelsesoplysninger, bedes du kontakte register@clinicaltrials.gov. Så snart en ændring er implementeret på clinicaltrials.gov, vil denne også blive opdateret automatisk på vores hjemmeside .