Clinical Efficacy of Different Fissure Sealant Materials in the Newly Erupted Non-Carious First Permanent Molars
Clinical Efficacy of Different Fissure Sealant Materials in the Newly Erupted Non-Carious First Permanent Molars: A Randomized Controlled Clinical Trial
The aim of this study is to compare the clinical retention rates, marginal adaptation, marginal discoloration and secondary caries formation of two different types of resin-modified glass ionomers (Fuji® II LC; Clinpro™ XT Varnish) and giomer-containing fissure sealant materials (Beautifil Flow) with glass ionomer-containing fissure sealant material (Fuji Triage®) used on newly erupted non-carious first permanent molars as a fissure sealant.
The study included 384 teeth belonging to 182 children, aged between 5 to 9 years old, who have two newly erupted mandibular permanent first molars.
Przegląd badań
Status
Warunki
Szczegółowy opis
Typ studiów
Zapisy (Rzeczywisty)
Faza
- Nie dotyczy
Kontakty i lokalizacje
Lokalizacje studiów
-
-
-
Izmir, Indyk
- Izmir Katip Celebi University
-
-
Kryteria uczestnictwa
Kryteria kwalifikacji
Wiek uprawniający do nauki
Akceptuje zdrowych ochotników
Płeć kwalifikująca się do nauki
Opis
Inclusion Criteria:
- Children who have two newly erupted non-carious mandibular permanent first molars that fissure sealant is indicated,
- Newly erupted first permanent molars show scores of 0 (Sound tooth surface)-1(First visual change in enamel) according to ICDAS II,
- Newly erupted first permanent molars show scores between 0-13 by using DIAGNOdent device,
- Children who haven't any systemic disease that prevents the application,
- Cooperative children who allowed the clinical applications.
Exclusion Criteria:
- Teeth with proximal and initial caries,
- Teeth with applied fissure sealant,
- Teeth with developmental defects such as hypoplasia and restorations,
- Non-cooperative children who don't allow the clinical applications,
- Children and parents who denied the participation in the follow-up appointments.
Plan studiów
Jak projektuje się badanie?
Szczegóły projektu
- Główny cel: Leczenie
- Przydział: Randomizowane
- Model interwencyjny: Przydział równoległy
- Maskowanie: Podwójnie
Broń i interwencje
Grupa uczestników / Arm |
Interwencja / Leczenie |
|---|---|
|
Eksperymentalny: Group 1 (Fuji II LC-Fuji Triage)
In Group 1, newly erupted mandibular permanent first molars were sealed with resin-modified glass ionomers containing fissure sealant material (Fuji® II LC, GC Corporation, Tokyo, Japan) (test 1).
The other first molars were sealed with glass ionomers containing fissure sealant material (Fuji Triage®, GC Corporation, Tokyo, Japan) (control).
|
Fuji® II LC is a resin modified glass ionomer contained, fluoride releasing and light-cured material. Since the product is tolerant to moisture and saliva, it's used for fissure sealant of newly erupted teeth. Test 1 newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.The tooth surface was rinsed with water and dried. Thereafter, Fuji® II LC was applied to the pits and fissures on the tooth surface using a brush. Then, the varnish was applied and cured according to the manufacturer's instructions.
Inne nazwy:
Fuji Triage® is a new generation glass ionomer containing with low viscosity, high fluoride content and light curing materials. Since the product is tolerant of moisture and saliva, it is used for fissure sealant of newly erupted teeth. Control newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.Then the tooth surface was rinsed with water and dried. Thereafter,Fuji Triage® was applied to the pits and fissures on the tooth surface using a brush. Thereafter, the varnish was applied and cured according to the manufacturer's instructions.
Inne nazwy:
|
|
Eksperymentalny: Group 2 (Clinpro XT Varnish-Fuji Triage)
In Group 2, newly erupted mandibular permanent first molars were sealed with resin-modified glass ionomers containing fissure sealant material (Clinpro™ XT Varnish, 3M ESPE, St. Pauls, Miniapolis, MN, USA) (test 2).
The other first molars were sealed with glass ionomers containing fissure sealant material (Fuji Triage®, GC Corporation, Tokyo, Japan) (control).
|
Fuji Triage® is a new generation glass ionomer containing with low viscosity, high fluoride content and light curing materials. Since the product is tolerant of moisture and saliva, it is used for fissure sealant of newly erupted teeth. Control newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.Then the tooth surface was rinsed with water and dried. Thereafter,Fuji Triage® was applied to the pits and fissures on the tooth surface using a brush. Thereafter, the varnish was applied and cured according to the manufacturer's instructions.
Inne nazwy:
Clinpro™ XT Varnish is a resin modified glass ionomer containing, fluoride-releasing, light-cured varnish. Since the product is tolerant to moisture and saliva, it is used for fissure sealant of newly erupted teeth. The product can be recharged with fluoride using fluoride-containing products. Test 2 newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 35% phosphoric acid was applied to all surfaces of the tooth for 15 seconds.Then the tooth surface was rinsed with water and dried. Thereafter, Clinpro™ XT Varnish was applied in compliance with the manufacturers' instructions.
Inne nazwy:
|
|
Eksperymentalny: Group 3 (Beautiful Flow- Fuji Triage)
In Group 3, newly erupted mandibular permanent first molars were sealed with Giomer containing fissure sealant material (Beautifil Flow, Shofu, Kyoto, Japan) (test 3).
The other first molars were sealed with glass ionomers containing fissure sealant material (Fuji Triage®, GC Corporation, Tokyo, Japan) (control).
|
Fuji Triage® is a new generation glass ionomer containing with low viscosity, high fluoride content and light curing materials. Since the product is tolerant of moisture and saliva, it is used for fissure sealant of newly erupted teeth. Control newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.Then the tooth surface was rinsed with water and dried. Thereafter,Fuji Triage® was applied to the pits and fissures on the tooth surface using a brush. Thereafter, the varnish was applied and cured according to the manufacturer's instructions.
Inne nazwy:
Beautiful Flow is a Giomer contained, fluoride releasing and light cured material. The product contains pre-reacted glass ionomer particles (PRG). It is a high water resistant material. It is used for fissure sealant. Test 3 newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 7% phosphoric acid was applied to all surfaces of the tooth for 10 seconds. Then the tooth surface was rinsed with water and dried. Afterwards, a two-stage self-etch adhesive system was applied. Thereafter, Beautiful Flow was applied in compliance with the manufacturers' instructions.
Inne nazwy:
|
Co mierzy badanie?
Podstawowe miary wyniku
Miara wyniku |
Opis środka |
Ramy czasowe |
|---|---|---|
|
The assessment of clinical retention rates of fissure sealants applied to newly erupted permanent first molars.
Ramy czasowe: 18 months after the clinical applications
|
The primary outcome of the study was the assessment of clinical retention rates at 18th months.
|
18 months after the clinical applications
|
|
The assessment of marginal adaptation rates of fissure sealants applied to newly erupted permanent first molars.
Ramy czasowe: 18 months after the clinical applications
|
The primary outcome of the study was the assessment of marginal adaptation rates at 18th months.
|
18 months after the clinical applications
|
|
The assessment of marginal discoloration rates of fissure sealants applied to newly erupted permanent first molars.
Ramy czasowe: 18 months after the clinical applications
|
The primary outcome of the study was the assessment of marginal discoloration rates at 18th months.
|
18 months after the clinical applications
|
|
The assessment of secondary caries rates of fissure sealants applied to newly erupted permanent first molars.
Ramy czasowe: 18 months after the clinical applications
|
The primary outcome of the study was the assessment of secondary caries rates at 18th months.
|
18 months after the clinical applications
|
Miary wyników drugorzędnych
Miara wyniku |
Opis środka |
Ramy czasowe |
|---|---|---|
|
The assessment of remineralization capacity using DIAGNOdent device
Ramy czasowe: 18 months after the clinical applications
|
The secondary outcome of the study was the assessment of remineralization capacity using DIAGNOdent, at 18th months.
|
18 months after the clinical applications
|
Współpracownicy i badacze
Sponsor
Daty zapisu na studia
Główne daty studiów
Rozpoczęcie studiów (Rzeczywisty)
Zakończenie podstawowe (Rzeczywisty)
Ukończenie studiów (Rzeczywisty)
Daty rejestracji na studia
Pierwszy przesłany
Pierwszy przesłany, który spełnia kryteria kontroli jakości
Pierwszy wysłany (Rzeczywisty)
Aktualizacje rekordów badań
Ostatnia wysłana aktualizacja (Rzeczywisty)
Ostatnia przesłana aktualizacja, która spełniała kryteria kontroli jakości
Ostatnia weryfikacja
Więcej informacji
Terminy związane z tym badaniem
Słowa kluczowe
Inne numery identyfikacyjne badania
- 2018-TDU-DİŞF-0050
Plan dla danych uczestnika indywidualnego (IPD)
Planujesz udostępniać dane poszczególnych uczestników (IPD)?
Informacje o lekach i urządzeniach, dokumenty badawcze
Bada produkt leczniczy regulowany przez amerykańską FDA
Bada produkt urządzenia regulowany przez amerykańską FDA
Te informacje zostały pobrane bezpośrednio ze strony internetowej clinicaltrials.gov bez żadnych zmian. Jeśli chcesz zmienić, usunąć lub zaktualizować dane swojego badania, skontaktuj się z register@clinicaltrials.gov. Gdy tylko zmiana zostanie wprowadzona na stronie clinicaltrials.gov, zostanie ona automatycznie zaktualizowana również na naszej stronie internetowej .