Clinical Efficacy of Different Fissure Sealant Materials in the Newly Erupted Non-Carious First Permanent Molars
Clinical Efficacy of Different Fissure Sealant Materials in the Newly Erupted Non-Carious First Permanent Molars: A Randomized Controlled Clinical Trial
The aim of this study is to compare the clinical retention rates, marginal adaptation, marginal discoloration and secondary caries formation of two different types of resin-modified glass ionomers (Fuji® II LC; Clinpro™ XT Varnish) and giomer-containing fissure sealant materials (Beautifil Flow) with glass ionomer-containing fissure sealant material (Fuji Triage®) used on newly erupted non-carious first permanent molars as a fissure sealant.
The study included 384 teeth belonging to 182 children, aged between 5 to 9 years old, who have two newly erupted mandibular permanent first molars.
연구 개요
상태
정황
상세 설명
연구 유형
등록 (실제)
단계
- 해당 없음
연락처 및 위치
연구 장소
-
-
-
Izmir, 칠면조
- Izmir Katip Celebi University
-
-
참여기준
자격 기준
공부할 수 있는 나이
건강한 자원 봉사자를 받아들입니다
연구 대상 성별
설명
Inclusion Criteria:
- Children who have two newly erupted non-carious mandibular permanent first molars that fissure sealant is indicated,
- Newly erupted first permanent molars show scores of 0 (Sound tooth surface)-1(First visual change in enamel) according to ICDAS II,
- Newly erupted first permanent molars show scores between 0-13 by using DIAGNOdent device,
- Children who haven't any systemic disease that prevents the application,
- Cooperative children who allowed the clinical applications.
Exclusion Criteria:
- Teeth with proximal and initial caries,
- Teeth with applied fissure sealant,
- Teeth with developmental defects such as hypoplasia and restorations,
- Non-cooperative children who don't allow the clinical applications,
- Children and parents who denied the participation in the follow-up appointments.
공부 계획
연구는 어떻게 설계됩니까?
디자인 세부사항
- 주 목적: 치료
- 할당: 무작위
- 중재 모델: 병렬 할당
- 마스킹: 더블
무기와 개입
참가자 그룹 / 팔 |
개입 / 치료 |
|---|---|
|
실험적: Group 1 (Fuji II LC-Fuji Triage)
In Group 1, newly erupted mandibular permanent first molars were sealed with resin-modified glass ionomers containing fissure sealant material (Fuji® II LC, GC Corporation, Tokyo, Japan) (test 1).
The other first molars were sealed with glass ionomers containing fissure sealant material (Fuji Triage®, GC Corporation, Tokyo, Japan) (control).
|
Fuji® II LC is a resin modified glass ionomer contained, fluoride releasing and light-cured material. Since the product is tolerant to moisture and saliva, it's used for fissure sealant of newly erupted teeth. Test 1 newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.The tooth surface was rinsed with water and dried. Thereafter, Fuji® II LC was applied to the pits and fissures on the tooth surface using a brush. Then, the varnish was applied and cured according to the manufacturer's instructions.
다른 이름들:
Fuji Triage® is a new generation glass ionomer containing with low viscosity, high fluoride content and light curing materials. Since the product is tolerant of moisture and saliva, it is used for fissure sealant of newly erupted teeth. Control newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.Then the tooth surface was rinsed with water and dried. Thereafter,Fuji Triage® was applied to the pits and fissures on the tooth surface using a brush. Thereafter, the varnish was applied and cured according to the manufacturer's instructions.
다른 이름들:
|
|
실험적: Group 2 (Clinpro XT Varnish-Fuji Triage)
In Group 2, newly erupted mandibular permanent first molars were sealed with resin-modified glass ionomers containing fissure sealant material (Clinpro™ XT Varnish, 3M ESPE, St. Pauls, Miniapolis, MN, USA) (test 2).
The other first molars were sealed with glass ionomers containing fissure sealant material (Fuji Triage®, GC Corporation, Tokyo, Japan) (control).
|
Fuji Triage® is a new generation glass ionomer containing with low viscosity, high fluoride content and light curing materials. Since the product is tolerant of moisture and saliva, it is used for fissure sealant of newly erupted teeth. Control newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.Then the tooth surface was rinsed with water and dried. Thereafter,Fuji Triage® was applied to the pits and fissures on the tooth surface using a brush. Thereafter, the varnish was applied and cured according to the manufacturer's instructions.
다른 이름들:
Clinpro™ XT Varnish is a resin modified glass ionomer containing, fluoride-releasing, light-cured varnish. Since the product is tolerant to moisture and saliva, it is used for fissure sealant of newly erupted teeth. The product can be recharged with fluoride using fluoride-containing products. Test 2 newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 35% phosphoric acid was applied to all surfaces of the tooth for 15 seconds.Then the tooth surface was rinsed with water and dried. Thereafter, Clinpro™ XT Varnish was applied in compliance with the manufacturers' instructions.
다른 이름들:
|
|
실험적: Group 3 (Beautiful Flow- Fuji Triage)
In Group 3, newly erupted mandibular permanent first molars were sealed with Giomer containing fissure sealant material (Beautifil Flow, Shofu, Kyoto, Japan) (test 3).
The other first molars were sealed with glass ionomers containing fissure sealant material (Fuji Triage®, GC Corporation, Tokyo, Japan) (control).
|
Fuji Triage® is a new generation glass ionomer containing with low viscosity, high fluoride content and light curing materials. Since the product is tolerant of moisture and saliva, it is used for fissure sealant of newly erupted teeth. Control newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 20% cavity conditioner was applied to all surfaces of the tooth for 10 seconds.Then the tooth surface was rinsed with water and dried. Thereafter,Fuji Triage® was applied to the pits and fissures on the tooth surface using a brush. Thereafter, the varnish was applied and cured according to the manufacturer's instructions.
다른 이름들:
Beautiful Flow is a Giomer contained, fluoride releasing and light cured material. The product contains pre-reacted glass ionomer particles (PRG). It is a high water resistant material. It is used for fissure sealant. Test 3 newly erupted first permanent molars were cleaned with a pumice paste using a bristle brush and isolated with cotton rolls. Then, 7% phosphoric acid was applied to all surfaces of the tooth for 10 seconds. Then the tooth surface was rinsed with water and dried. Afterwards, a two-stage self-etch adhesive system was applied. Thereafter, Beautiful Flow was applied in compliance with the manufacturers' instructions.
다른 이름들:
|
연구는 무엇을 측정합니까?
주요 결과 측정
결과 측정 |
측정값 설명 |
기간 |
|---|---|---|
|
The assessment of clinical retention rates of fissure sealants applied to newly erupted permanent first molars.
기간: 18 months after the clinical applications
|
The primary outcome of the study was the assessment of clinical retention rates at 18th months.
|
18 months after the clinical applications
|
|
The assessment of marginal adaptation rates of fissure sealants applied to newly erupted permanent first molars.
기간: 18 months after the clinical applications
|
The primary outcome of the study was the assessment of marginal adaptation rates at 18th months.
|
18 months after the clinical applications
|
|
The assessment of marginal discoloration rates of fissure sealants applied to newly erupted permanent first molars.
기간: 18 months after the clinical applications
|
The primary outcome of the study was the assessment of marginal discoloration rates at 18th months.
|
18 months after the clinical applications
|
|
The assessment of secondary caries rates of fissure sealants applied to newly erupted permanent first molars.
기간: 18 months after the clinical applications
|
The primary outcome of the study was the assessment of secondary caries rates at 18th months.
|
18 months after the clinical applications
|
2차 결과 측정
결과 측정 |
측정값 설명 |
기간 |
|---|---|---|
|
The assessment of remineralization capacity using DIAGNOdent device
기간: 18 months after the clinical applications
|
The secondary outcome of the study was the assessment of remineralization capacity using DIAGNOdent, at 18th months.
|
18 months after the clinical applications
|
공동 작업자 및 조사자
연구 기록 날짜
연구 주요 날짜
연구 시작 (실제)
기본 완료 (실제)
연구 완료 (실제)
연구 등록 날짜
최초 제출
QC 기준을 충족하는 최초 제출
처음 게시됨 (실제)
연구 기록 업데이트
마지막 업데이트 게시됨 (실제)
QC 기준을 충족하는 마지막 업데이트 제출
마지막으로 확인됨
추가 정보
이 연구와 관련된 용어
기타 연구 ID 번호
- 2018-TDU-DİŞF-0050
개별 참가자 데이터(IPD) 계획
개별 참가자 데이터(IPD)를 공유할 계획입니까?
약물 및 장치 정보, 연구 문서
미국 FDA 규제 의약품 연구
미국 FDA 규제 기기 제품 연구
이 정보는 변경 없이 clinicaltrials.gov 웹사이트에서 직접 가져온 것입니다. 귀하의 연구 세부 정보를 변경, 제거 또는 업데이트하도록 요청하는 경우 register@clinicaltrials.gov. 문의하십시오. 변경 사항이 clinicaltrials.gov에 구현되는 즉시 저희 웹사이트에도 자동으로 업데이트됩니다. .