このページは自動翻訳されたものであり、翻訳の正確性は保証されていません。を参照してください。 英語版 ソーステキスト用。

HCV関連の慢性肝疾患の患者における腸内微生物叢のパターンに対する直接作用抗ウイルス薬の影響

2025年2月11日 更新者:Omnia Mohammed Kamal Eldin、Assiut University

直接作用型抗ウイルス(DAA)療法の最近の導入により、被験者や重度の併存疾患を持つ患者でも、HCV感染の治療率が劇的に変化しました。 ますます多くの研究が、HCV根絶後の肝臓線維症の代理マーカーである肝臓剛性の改善を実証しています。 これは、これらの患者の腸の肝臓軸に有益な影響を与える可能性があり、さらに疾患の進行を遅らせることに寄与し、合併症の将来の発生に影響を与える可能性があります。 健康な被験者の皮膚微生物叢の多様性は、健康な被験者よりも低かったが、HCV感染の治療によって大幅に改善され、ベースラインと比較して腸内微生物叢の組成の変化が観察された。 潜在的に病原性菌(腸内菌、腸球菌、およびブドウ球菌)の豊富さは、治療後に減少しました。

研究の目的:

1肝硬変の有無にかかわらず、HCV感染症の患者における腸内微生物叢の変化を決定します。

調査の概要

詳細な説明

It is a case-control study that was conducted on 8 non-cirrhotic chronically infected patients with hepatitis C virus (group I), 4 patients successfully treated from HCV after receiving 12 weeks of DAAs (Sofosbuvir, Daclatasvir) who achieved sustained viral response (group II), and 4 patients who relapsed after 12 weeks of DAAs (Sofosbuvir/Velpatasvir/Voxilaprevir) (group III). Fourteen healthy control subjects who were matched for age and sex (group VI) were enrolled after obtaining their informed consent. Detailed history taking, clinical examination, abdominal ultrasound (U/S), and laboratory investigations including complete blood count (CBC), liver function tests, and serum transaminases were determined for all patients.

Inclusion criteria: patients of any age or sex who was proved to be infected with hepatitis C virus without treatment, those who received treatment and sustained viral response and those who received treatment and relapsed and healthy controls were enrolled in the study Exclusion Criteria Patients receiving antibiotic treatment, probiotics, or any other medical treatment influencing intestinal microbiota 1 month before the start of the study as well as patients with any other viral infection as HBV, and HIV were excluded.

Specimen collection Fresh stool samples were collected in the morning from all the participants and were processed within 1 h after defecation. An aseptic technique was used for the collection of all specimens, with care taken to avoid contamination.

Also, 5ml of venous blood under aseptic conditions was collected from each patient for estimation of the different laboratory parameters.

1.4: Quantitative assessment of the RNA viral load HCV-RNA level was detected using real-time polymerase chain reaction (RT-PCR) (Bioline International, UK) with a lower limit of detection of 15 IU/ml. (Alter.,2007).

1.5: Microbiota Profiling 1.5.1.DNA Extraction

Immediately after collection, Genomic DNA was extracted from the stool samples using the Invitrogen PureLink Microbiome DNA Purification Kit (Thermo Fisher Scientific, Cat #A29790). The stool samples were mixed thoroughly to create a homogenous sample before weighing and transferring the measured amount of the feces (0.2± 0.05 g) to the bead tube, then we followed instructions as directed by the manufacturer as follows:

We performed the procedure at room temperature (20-25 ºC).1. The lysate was prepared as following:

  1. Sample (0.2±0.05 g) and S1-Lysis Buffer (600µL) were added to the bead tube, the total mixture was 800µL,
  2. The bead tubes were vortexed to ensure that the samples were thoroughly dispersed in the liquid.
  3. One hundred µL of S2 -Lysis Enhancer was added and vortexed briefly.

e. Bead tubes were vortexed for 10 minutes at maximum speed on the vortex mixer using hands-free adapter and horizontal agitation.

f. The bead tubes were centrifuged at 14,000× g for 5 minutes at room temperature.

g. Then, 400µL of the supernatant was transferred to a clean microcentrifuge tube.

h. After that, 250µL of S3- cleanup Buffer was added to the tubes and vortexed immediately to ensure even dispersion of S3 and uniform precipitation of inhibitors.

i. The bead tubes were centrifuged at 14,000× g for 2 minutes at room temperature.

j. Then 500µL of the supernatant was transferred to a clean microcentrifuge tube, with care to avoid the pellet and any debris.

2. Then, DNA was bound to the column as following :

  1. A total of 900µL of S4-Binding Buffer was added to the tubes and vortexed briefly.
  2. Then, 700µL of the sample mixture was loaded onto a spin column-tube assembly, and centrifuged at 14,000× g for 1 minute.
  3. The flow-through was discarded and the previous step was repeated with the remaining sample mixture.

We ensured that the entire sample mixture passed into the collection tube by inspecting the column and centrifuging again at 14,000 × g for 1 minute.

3. The DNA was washed and eluted as following:

  1. The spin column was placed in a clean collection tube, 500µL of S5- Wash Buffer was added, and then the spin column- tube was centrifuged assembly at 14.000 × g for 1 minute.
  2. the flow-through was discarded-, and then the spin column-tube was centrifuged assembly at 14.000 × g for 30 seconds, we did the second centrifugation to optimize the removal of S5- wash Buffer which could interfere with downstream applications.
  3. The spin column was placed in a clean tube, 100µL of S6- Elution Buffer was added, and then the tubes were incubated at room temperature for 1 minute.
  4. The spin column-tube was centrifuged assembly at 14.000× g for 1 minute then the column was discarded.

The purified DNA in the tube was used for the following downstream applications.

1.5.2.PCR amplification of 16S rRNA gene

a. PCR optimization

Immediately after DNA extraction, PCR was conducted to amplify hyper variable regions V3-V4 of 16S rRNA gene using the following primers with Illumina adapters (underlined):

Forward Primer 5'TCGTCGGCAGCGTCAGATGTGTATAAGAGACAGCCTACGGGNGGCWGCAG3' Reverse Primer 5'GTCTCGTGGGCTCGGAGATGTGTATAAGAGACAGGACTACHVGGGTATCTAATC 3' PCR reactions were performed for preparing 16SrRNA for sequencing in 25μL reactions with 0.8μL for each forward and reverse primers (10μM, Metabion, Germany), 3 μL of template DNA, and 12.5 μL of 1×of Hot Master Mix (Genedirex PCR supermix). 1.5.3. Agarose gel electrophoresis All PCR amplicons were assessed by loading 5 μL of the PCR product into wells of 1% (w/v) Agarose. Five μL of Hyper Ladder l marker was loaded into the first well. Five μL of the PCR reaction mixture from each sample was inserted into the appropriate wells of the gel. The gel was then immersed in Tris-Borate-EDTA (TBE) buffer and electrophoresed at 90 V for separation of the fragments. The gel was visualized after excitation under UV transillumination. The amplified products were sent to IGA Technology Services (Udine, Italy) for further processing.

1.5.4. PCR product purification (PCR Clean-Up) Five μL of the PCR reaction mixture from each sample was mixed with 2 μL of loading buffer and after that PCR products were purified using the Agincourt XP Ampure Beads (Beckam Coulter).

1.5.5. PCR Product sequencing After amplicon purification, dual indices and Illumina sequencing adapters were attached using the Nextera XT Index Kit (Illumina). The quality of the final products was assessed using a Bioanalyzer 2100 (Agilent Technologies, USA) and, after their quantification with a Qubit (Invitrogen), the samples were pooled in equal proportions and sequenced paired-end in an Illumina MiSeq with 600 cycles (300 cycles for each paired read and 12 cycles for the barcode sequence) at IGA Technology Services (Udine, Italy).

1.6. Sequence analysis 1.6.1. Sequence analysis with Illumina MiSeq metagenomics workflow

IGA Technology Services performed sequences analysis using the metagenomics workflow of MiSeq Reporter v2.3 (Illumina). Briefly, sequences were demultiplexed based on index sequences. FASTQ files were generated with a Quality Score Trim sample-sheet set, to make trimming. The classification step was performed using Classify Reads, a proprietary Illumina algorithm that provides a species-level classification for paired-end reads. The process involves matching short subsequences of the reads (words) to a set of 16S reference sequences. The accumulated word matches for each read were used to assign reads to a particular taxonomic classification. The taxonomy database for the metagenomics workflow was an Illumina-curated version of the Greengenes database (greengenes. secondgenome. com/downloads/ database/13_5).

1.6.2. Sequence preprocessing and analysis Illumina platform generated two reads for the forward and reverse direction of the V3-V4 hyper-variable region of the 16S rRNA gene. Sequence filtering and analysis of sequence data were essentially performed with the MOTHUR (v. 1.35.1) software package (Schloss et al.,2009).

1.6.3. Data combination and preprocessing Firstly, Forward and reverse reads for each sample were combined in a single contig separately and samples from each site were combined in a single dataset for each site. This was performed using the (commands make. Contigs, make. file, and make. group) respectively.

1.6.4. Quality value checking and filtering

Quality filtering included rejecting reads <420nt and >470 nt, excluding homopolymer runs >8nt, and 0 ambiguous bases, and requiring minimum average Phred quality ≥25 using (command trim. seqs).

Illumina may generate many copies of the same sequence which were considered as duplicated sequences. Because it's computationally wasteful to align the same thing a bazillion times, we unique our sequences using the (command unique.seqs).

1.6.5. Sequence aligning to a reference database SILVA database was customized to the V3-V4 region of 16s rRNA gene using the (command pcr.seqs), corresponding to the same regions in Escherichia coli starting from 6426 and ending at 27645. After that, our sequences were aligned to reference database reference sequences (http://www.arb-silva.de/) using (command align.seqs). (Quast et al.,2012)

1.6.6. Sequence deduplication, denoising, and chimera removal Duplicate sequences were merged with previous unique sequences by running (command unique.seqs). To denoise our sequences, precluster the sequences was done using the (command pre. cluster) allowing for up to 2 differences between sequences. This command split the sequences by group and then sorted them by abundance and went from most abundant to least and identified sequences that were within 2 nt of each other.

Chimeras sequences were removed using the MOTHUR implementation of the UCHIME algorithm (Edgar et al.,2011). The (command chimera. chime) detected chimeric sequence which was removed by (command get.seqs).

1.6.7. Sequence classification Sequences were aligned to the SILVA taxonomy using a Bayesian classifier with the (command classify.seqs). (Wang et al.,2007).

1.7 Bacterial diversity analysis using QIIME2 1.7.1 Alpha diversity analysis The diversity analytic plugin within QIIME2 uses a random resampling of 32,084 sequences per sample for even sampling depth. Estimates of ecological indices included: rarefaction curves, the number of observed OTUs (species), and the Shannon index, representing common measures of alpha diversity. Rarefaction of the alpha diversity, defining the number of OTUs detected as a function of sampling effort, was performed to confirm that sampling depth gave sufficient coverage to accurately analyze the dominant members of bacterial communities. Alpha diversity was analyzed using two approaches; the number of observed species representing richness and the Shannon diversity index representing richness and evenness of communities.

1.7.2 Beta diversity analysis Beta diversity analyses were estimated to determine phylogenetic distances between communities including weighted UniFrac distance matrices (Lozupone et al.,2011).

In the weighted UniFrac analysis, the relative abundance of taxa found in the sample is counted, so less abundant OTU has less weight in the analysis.

UniFrac principal coordinates analysis (PCoA) was performed for the interpretation of the UniFrac distance matrix. Phyloseq and ggpubr, R packages were used for the calculation and plotting of α and β diversity (McMurdie and Holmes.,2013). Finally, significance testing of sample clustering was assessed by Permutational Multivariate Analysis of Variance (Adonis R,package Vegan) (Anderson.,2001) using the weighted UniFrac distance matrix in QIIME by compare_categories.py script.

1.8. Core microbiome analysis: Discovering a core microbiome is very important for understanding the stable, consistent elements across complex microbic assemblages. A core is often defined as the suite of members shared among microbial consortia from similar habitats and is represented by the overlapping areas of circles in Venn diagrams, in which each circle contains the membership of the sample or habitats being compared (Shade and Handelsman.,2012).

1.9. Identification of Biomarkers and Discriminative Taxa LefSe exemplifies the Linear discriminant analysis (LDA) Effect Size method. LEfSe is an algorithm for high-dimensional biomarker identification and characterization that identifies features such as genes, pathways, or taxa that explain the differences between two or more biological states. The idea of LefSe is to start to define significantly differentially abundant OTUs, then use the Wilcoxon rank sum test to check for consistency in the differential abundance, and finally estimate an effect size per feature using linear discriminant analysis. This method assumes that microbial communities can be separated by a linear combination of OTUs (Segata et al.,2011).

1.10. Correlation between community member The Spearman's Rank Correlation Coefficient is used to discover the strength of a link between two sets of data. The correlation coefficient has a maximum value of 1, indicating a perfect positive association between the data sets, and a minimum value of -1 indicating a perfect negative association between data sets. A value of 0 indicates no association between the ranks for the observed values (Farlie., 1960).

研究の種類

観察的

入学 (実際)

30

連絡先と場所

このセクションには、調査を実施する担当者の連絡先の詳細と、この調査が実施されている場所に関する情報が記載されています。

研究場所

      • Assiut、エジプト
        • Assiut University Hospitals

参加基準

研究者は、適格基準と呼ばれる特定の説明に適合する人を探します。これらの基準のいくつかの例は、人の一般的な健康状態または以前の治療です。

適格基準

就学可能な年齢

  • 子
  • 大人
  • 高齢者

健康ボランティアの受け入れ

はい

サンプリング方法

非確率サンプル

調査対象母集団

this study included four arms of patients :1- patients with chronic HCV infection who has not received any medications. @- patients who are cure from HCV infection after receiving days therapy.3- patients who have relapsed after treating HCV infection.4- healthy controls

説明

Inclusion Criteria: non-cirrhotic chronically infected patients with hepatitis C virus (group I), patients who are successfully treated from HCV after receiving 12 weeks of DAAs (Sofosbuvir, Daclatasvir) who achieved SVR (group II), and patients who relapsed after 12 weeks of DAAs(Sofosbuvir/Velpatasvir/Voxilaprevir) (group III). healthy control subjects who were matched for age and sex (group VI) were enrolled after obtaining their informed consent. - Exclusion Criteria:Patients receiving antibiotic treatment, probiotics, or any other medical treatment influencing intestinal microbiota 1 month before the start of the study as well as patients with any other viral infection as HBV, and HIV were excluded.

-

研究計画

このセクションでは、研究がどのように設計され、研究が何を測定しているかなど、研究計画の詳細を提供します。

研究はどのように設計されていますか?

デザインの詳細

コホートと介入

グループ/コホート
慢性HCV感染症の患者
患者はHCV感染の薬を受けていません
HCV感染の治療を受け、持続的なウイルス反応を達成した患者
これらの患者は、HCVのために12週間の抗ウイルス療法を受け、ウイルス反応を維持しました(ソフォスブビル、ダクラタスビル)
HCV治療を受けた後に再発し、ウイルス反応を維持できなかった患者
抗ウイルス療法を受けた後に再発した患者(Sofosbuvir/Velpatasvir/Voxilaprevir)
年齢やセックスのために他のグループと一致する健康なコントロール

この研究は何を測定していますか?

主要な結果の測定

結果測定
メジャーの説明
時間枠
1.肝硬変のない慢性HCV患者の腸内微生物叢の組成と構造を説明してください(治療、再発、およびSVRを達成した人)は、その一致する健康なコントロールと比較して
時間枠:4〜5週間
午前中にすべての参加者から新鮮な便サンプルを収集し、1時間および5 mLの静脈血を収集したために処理されました。Microbiotaプロファイリングは、DNA抽出を通じて行われ、16S RRNA遺伝子のPCR増幅が行われ、アガロースゲル電気泳動による評価が行われました。 Illumina Miseq Metagenomicsワークフローを介して行われたシーケンスの分析次に、処理、分析、データの組み合わせ、および前処理が行われました。Qiime2およびコアマイクロベーブ分析を使用したbacterial Diversity分析は最終的に行われました。
4〜5週間

協力者と研究者

ここでは、この調査に関係する人々や組織を見つけることができます。

スポンサー

研究記録日

これらの日付は、ClinicalTrials.gov への研究記録と要約結果の提出の進捗状況を追跡します。研究記録と報告された結果は、国立医学図書館 (NLM) によって審査され、公開 Web サイトに掲載される前に、特定の品質管理基準を満たしていることが確認されます。

主要日程の研究

研究開始 (実際)

2022年5月13日

一次修了 (実際)

2024年3月20日

研究の完了 (実際)

2024年8月30日

試験登録日

最初に提出

2025年2月3日

QC基準を満たした最初の提出物

2025年2月11日

最初の投稿 (実際)

2025年3月25日

学習記録の更新

投稿された最後の更新 (実際)

2025年3月25日

QC基準を満たした最後の更新が送信されました

2025年2月11日

最終確認日

2025年2月1日

詳しくは

本研究に関する用語

追加の関連 MeSH 用語

その他の研究ID番号

  • 04_2023_200392

個々の参加者データ (IPD) の計画

個々の参加者データ (IPD) を共有する予定はありますか?

未定

医薬品およびデバイス情報、研究文書

米国FDA規制医薬品の研究

いいえ

米国FDA規制機器製品の研究

いいえ

米国で製造され、米国から輸出された製品。

いいえ

この情報は、Web サイト clinicaltrials.gov から変更なしで直接取得したものです。研究の詳細を変更、削除、または更新するリクエストがある場合は、register@clinicaltrials.gov。 までご連絡ください。 clinicaltrials.gov に変更が加えられるとすぐに、ウェブサイトでも自動的に更新されます。

購読する