Denna sida har översatts automatiskt och översättningens korrekthet kan inte garanteras. Vänligen se engelsk version för en källtext.

Påverkan av direktverkande antivirala läkemedel på mönstren för tarmmikrobiota hos patienter med HCV-relaterade kroniska leversjukdomar

11 februari 2025 uppdaterad av: Omnia Mohammed Kamal Eldin, Assiut University

Den senaste introduktionen av direktverkande antiviral (DAA) terapi har dramatiskt förändrat hastigheterna för botemedel mot HCV-infektion även hos svåra att behandla försökspersoner och hos dem med allvarliga komorbiditeter. Ett växande antal studier har också visat en förbättring av leverstyvhet, som är en surrogatmarkör för leverfibros, efter utrotning av HCV. Detta kan ha en gynnsam inverkan på tarmleveraxeln hos dessa patienter och kan ytterligare bidra till att bromsa utvecklingen av sjukdomen, vilket potentiellt påverkar den framtida förekomsten av komplikationer. Gutmikrobiota alfa -mångfalden hos cirrotiska patienter, som var lägre än hos friska försökspersoner, förbättrades signifikant genom botningen av HCV -infektion och en förskjutning i den totala tarmmikrobiota -sammansättningen observerades jämfört med baslinjen. Överflödet av potentiellt patogena bakterier (Enterobacteriaceae, Enterococcus och Staphylococcus) minskade efter behandlingen.

Syftet med studien:

1 För att bestämma förändringarna i tarmmikrobiota hos patienter med HCV-infektioner med / utan levercirrhos.

Studieöversikt

Status

Avslutad

Detaljerad beskrivning

It is a case-control study that was conducted on 8 non-cirrhotic chronically infected patients with hepatitis C virus (group I), 4 patients successfully treated from HCV after receiving 12 weeks of DAAs (Sofosbuvir, Daclatasvir) who achieved sustained viral response (group II), and 4 patients who relapsed after 12 weeks of DAAs (Sofosbuvir/Velpatasvir/Voxilaprevir) (group III). Fourteen healthy control subjects who were matched for age and sex (group VI) were enrolled after obtaining their informed consent. Detailed history taking, clinical examination, abdominal ultrasound (U/S), and laboratory investigations including complete blood count (CBC), liver function tests, and serum transaminases were determined for all patients.

Inclusion criteria: patients of any age or sex who was proved to be infected with hepatitis C virus without treatment, those who received treatment and sustained viral response and those who received treatment and relapsed and healthy controls were enrolled in the study Exclusion Criteria Patients receiving antibiotic treatment, probiotics, or any other medical treatment influencing intestinal microbiota 1 month before the start of the study as well as patients with any other viral infection as HBV, and HIV were excluded.

Specimen collection Fresh stool samples were collected in the morning from all the participants and were processed within 1 h after defecation. An aseptic technique was used for the collection of all specimens, with care taken to avoid contamination.

Also, 5ml of venous blood under aseptic conditions was collected from each patient for estimation of the different laboratory parameters.

1.4: Quantitative assessment of the RNA viral load HCV-RNA level was detected using real-time polymerase chain reaction (RT-PCR) (Bioline International, UK) with a lower limit of detection of 15 IU/ml. (Alter.,2007).

1.5: Microbiota Profiling 1.5.1.DNA Extraction

Immediately after collection, Genomic DNA was extracted from the stool samples using the Invitrogen PureLink Microbiome DNA Purification Kit (Thermo Fisher Scientific, Cat #A29790). The stool samples were mixed thoroughly to create a homogenous sample before weighing and transferring the measured amount of the feces (0.2± 0.05 g) to the bead tube, then we followed instructions as directed by the manufacturer as follows:

We performed the procedure at room temperature (20-25 ºC).1. The lysate was prepared as following:

  1. Sample (0.2±0.05 g) and S1-Lysis Buffer (600µL) were added to the bead tube, the total mixture was 800µL,
  2. The bead tubes were vortexed to ensure that the samples were thoroughly dispersed in the liquid.
  3. One hundred µL of S2 -Lysis Enhancer was added and vortexed briefly.

e. Bead tubes were vortexed for 10 minutes at maximum speed on the vortex mixer using hands-free adapter and horizontal agitation.

f. The bead tubes were centrifuged at 14,000× g for 5 minutes at room temperature.

g. Then, 400µL of the supernatant was transferred to a clean microcentrifuge tube.

h. After that, 250µL of S3- cleanup Buffer was added to the tubes and vortexed immediately to ensure even dispersion of S3 and uniform precipitation of inhibitors.

i. The bead tubes were centrifuged at 14,000× g for 2 minutes at room temperature.

j. Then 500µL of the supernatant was transferred to a clean microcentrifuge tube, with care to avoid the pellet and any debris.

2. Then, DNA was bound to the column as following :

  1. A total of 900µL of S4-Binding Buffer was added to the tubes and vortexed briefly.
  2. Then, 700µL of the sample mixture was loaded onto a spin column-tube assembly, and centrifuged at 14,000× g for 1 minute.
  3. The flow-through was discarded and the previous step was repeated with the remaining sample mixture.

We ensured that the entire sample mixture passed into the collection tube by inspecting the column and centrifuging again at 14,000 × g for 1 minute.

3. The DNA was washed and eluted as following:

  1. The spin column was placed in a clean collection tube, 500µL of S5- Wash Buffer was added, and then the spin column- tube was centrifuged assembly at 14.000 × g for 1 minute.
  2. the flow-through was discarded-, and then the spin column-tube was centrifuged assembly at 14.000 × g for 30 seconds, we did the second centrifugation to optimize the removal of S5- wash Buffer which could interfere with downstream applications.
  3. The spin column was placed in a clean tube, 100µL of S6- Elution Buffer was added, and then the tubes were incubated at room temperature for 1 minute.
  4. The spin column-tube was centrifuged assembly at 14.000× g for 1 minute then the column was discarded.

The purified DNA in the tube was used for the following downstream applications.

1.5.2.PCR amplification of 16S rRNA gene

a. PCR optimization

Immediately after DNA extraction, PCR was conducted to amplify hyper variable regions V3-V4 of 16S rRNA gene using the following primers with Illumina adapters (underlined):

Forward Primer 5'TCGTCGGCAGCGTCAGATGTGTATAAGAGACAGCCTACGGGNGGCWGCAG3' Reverse Primer 5'GTCTCGTGGGCTCGGAGATGTGTATAAGAGACAGGACTACHVGGGTATCTAATC 3' PCR reactions were performed for preparing 16SrRNA for sequencing in 25μL reactions with 0.8μL for each forward and reverse primers (10μM, Metabion, Germany), 3 μL of template DNA, and 12.5 μL of 1×of Hot Master Mix (Genedirex PCR supermix). 1.5.3. Agarose gel electrophoresis All PCR amplicons were assessed by loading 5 μL of the PCR product into wells of 1% (w/v) Agarose. Five μL of Hyper Ladder l marker was loaded into the first well. Five μL of the PCR reaction mixture from each sample was inserted into the appropriate wells of the gel. The gel was then immersed in Tris-Borate-EDTA (TBE) buffer and electrophoresed at 90 V for separation of the fragments. The gel was visualized after excitation under UV transillumination. The amplified products were sent to IGA Technology Services (Udine, Italy) for further processing.

1.5.4. PCR product purification (PCR Clean-Up) Five μL of the PCR reaction mixture from each sample was mixed with 2 μL of loading buffer and after that PCR products were purified using the Agincourt XP Ampure Beads (Beckam Coulter).

1.5.5. PCR Product sequencing After amplicon purification, dual indices and Illumina sequencing adapters were attached using the Nextera XT Index Kit (Illumina). The quality of the final products was assessed using a Bioanalyzer 2100 (Agilent Technologies, USA) and, after their quantification with a Qubit (Invitrogen), the samples were pooled in equal proportions and sequenced paired-end in an Illumina MiSeq with 600 cycles (300 cycles for each paired read and 12 cycles for the barcode sequence) at IGA Technology Services (Udine, Italy).

1.6. Sequence analysis 1.6.1. Sequence analysis with Illumina MiSeq metagenomics workflow

IGA Technology Services performed sequences analysis using the metagenomics workflow of MiSeq Reporter v2.3 (Illumina). Briefly, sequences were demultiplexed based on index sequences. FASTQ files were generated with a Quality Score Trim sample-sheet set, to make trimming. The classification step was performed using Classify Reads, a proprietary Illumina algorithm that provides a species-level classification for paired-end reads. The process involves matching short subsequences of the reads (words) to a set of 16S reference sequences. The accumulated word matches for each read were used to assign reads to a particular taxonomic classification. The taxonomy database for the metagenomics workflow was an Illumina-curated version of the Greengenes database (greengenes. secondgenome. com/downloads/ database/13_5).

1.6.2. Sequence preprocessing and analysis Illumina platform generated two reads for the forward and reverse direction of the V3-V4 hyper-variable region of the 16S rRNA gene. Sequence filtering and analysis of sequence data were essentially performed with the MOTHUR (v. 1.35.1) software package (Schloss et al.,2009).

1.6.3. Data combination and preprocessing Firstly, Forward and reverse reads for each sample were combined in a single contig separately and samples from each site were combined in a single dataset for each site. This was performed using the (commands make. Contigs, make. file, and make. group) respectively.

1.6.4. Quality value checking and filtering

Quality filtering included rejecting reads <420nt and >470 nt, excluding homopolymer runs >8nt, and 0 ambiguous bases, and requiring minimum average Phred quality ≥25 using (command trim. seqs).

Illumina may generate many copies of the same sequence which were considered as duplicated sequences. Because it's computationally wasteful to align the same thing a bazillion times, we unique our sequences using the (command unique.seqs).

1.6.5. Sequence aligning to a reference database SILVA database was customized to the V3-V4 region of 16s rRNA gene using the (command pcr.seqs), corresponding to the same regions in Escherichia coli starting from 6426 and ending at 27645. After that, our sequences were aligned to reference database reference sequences (http://www.arb-silva.de/) using (command align.seqs). (Quast et al.,2012)

1.6.6. Sequence deduplication, denoising, and chimera removal Duplicate sequences were merged with previous unique sequences by running (command unique.seqs). To denoise our sequences, precluster the sequences was done using the (command pre. cluster) allowing for up to 2 differences between sequences. This command split the sequences by group and then sorted them by abundance and went from most abundant to least and identified sequences that were within 2 nt of each other.

Chimeras sequences were removed using the MOTHUR implementation of the UCHIME algorithm (Edgar et al.,2011). The (command chimera. chime) detected chimeric sequence which was removed by (command get.seqs).

1.6.7. Sequence classification Sequences were aligned to the SILVA taxonomy using a Bayesian classifier with the (command classify.seqs). (Wang et al.,2007).

1.7 Bacterial diversity analysis using QIIME2 1.7.1 Alpha diversity analysis The diversity analytic plugin within QIIME2 uses a random resampling of 32,084 sequences per sample for even sampling depth. Estimates of ecological indices included: rarefaction curves, the number of observed OTUs (species), and the Shannon index, representing common measures of alpha diversity. Rarefaction of the alpha diversity, defining the number of OTUs detected as a function of sampling effort, was performed to confirm that sampling depth gave sufficient coverage to accurately analyze the dominant members of bacterial communities. Alpha diversity was analyzed using two approaches; the number of observed species representing richness and the Shannon diversity index representing richness and evenness of communities.

1.7.2 Beta diversity analysis Beta diversity analyses were estimated to determine phylogenetic distances between communities including weighted UniFrac distance matrices (Lozupone et al.,2011).

In the weighted UniFrac analysis, the relative abundance of taxa found in the sample is counted, so less abundant OTU has less weight in the analysis.

UniFrac principal coordinates analysis (PCoA) was performed for the interpretation of the UniFrac distance matrix. Phyloseq and ggpubr, R packages were used for the calculation and plotting of α and β diversity (McMurdie and Holmes.,2013). Finally, significance testing of sample clustering was assessed by Permutational Multivariate Analysis of Variance (Adonis R,package Vegan) (Anderson.,2001) using the weighted UniFrac distance matrix in QIIME by compare_categories.py script.

1.8. Core microbiome analysis: Discovering a core microbiome is very important for understanding the stable, consistent elements across complex microbic assemblages. A core is often defined as the suite of members shared among microbial consortia from similar habitats and is represented by the overlapping areas of circles in Venn diagrams, in which each circle contains the membership of the sample or habitats being compared (Shade and Handelsman.,2012).

1.9. Identification of Biomarkers and Discriminative Taxa LefSe exemplifies the Linear discriminant analysis (LDA) Effect Size method. LEfSe is an algorithm for high-dimensional biomarker identification and characterization that identifies features such as genes, pathways, or taxa that explain the differences between two or more biological states. The idea of LefSe is to start to define significantly differentially abundant OTUs, then use the Wilcoxon rank sum test to check for consistency in the differential abundance, and finally estimate an effect size per feature using linear discriminant analysis. This method assumes that microbial communities can be separated by a linear combination of OTUs (Segata et al.,2011).

1.10. Correlation between community member The Spearman's Rank Correlation Coefficient is used to discover the strength of a link between two sets of data. The correlation coefficient has a maximum value of 1, indicating a perfect positive association between the data sets, and a minimum value of -1 indicating a perfect negative association between data sets. A value of 0 indicates no association between the ranks for the observed values (Farlie., 1960).

Studietyp

Observationell

Inskrivning (Faktisk)

30

Kontakter och platser

Det här avsnittet innehåller kontaktuppgifter för dem som genomför studien och information om var denna studie genomförs.

Studieorter

      • Assiut, Egypten
        • Assiut University Hospitals

Deltagandekriterier

Forskare letar efter personer som passar en viss beskrivning, så kallade behörighetskriterier. Några exempel på dessa kriterier är en persons allmänna hälsotillstånd eller tidigare behandlingar.

Urvalskriterier

Åldrar som är berättigade till studier

  • Barn
  • Vuxen
  • Äldre vuxen

Tar emot friska volontärer

Ja

Testmetod

Icke-sannolikhetsprov

Studera befolkning

this study included four arms of patients :1- patients with chronic HCV infection who has not received any medications. @- patients who are cure from HCV infection after receiving days therapy.3- patients who have relapsed after treating HCV infection.4- healthy controls

Beskrivning

Inclusion Criteria: non-cirrhotic chronically infected patients with hepatitis C virus (group I), patients who are successfully treated from HCV after receiving 12 weeks of DAAs (Sofosbuvir, Daclatasvir) who achieved SVR (group II), and patients who relapsed after 12 weeks of DAAs(Sofosbuvir/Velpatasvir/Voxilaprevir) (group III). healthy control subjects who were matched for age and sex (group VI) were enrolled after obtaining their informed consent. - Exclusion Criteria:Patients receiving antibiotic treatment, probiotics, or any other medical treatment influencing intestinal microbiota 1 month before the start of the study as well as patients with any other viral infection as HBV, and HIV were excluded.

-

Studieplan

Det här avsnittet ger detaljer om studieplanen, inklusive hur studien är utformad och vad studien mäter.

Hur är studien utformad?

Designdetaljer

Kohorter och interventioner

Grupp / Kohort
Patienter med kronisk HCV -infektion
Patienterna har inte fått några mediciner för HCV -infektion
Patienter som har fått behandling för HCV -infektion och uppnått långvarigt viralt svar
Dessa patienter fick 12 veckors antiviral terapi för HCV och varaktigt viralt svar (sofosbuvir, Daclatasvir)
Patienter som återkallade efter att ha fått HCV -behandling och inte kunde upprätthålla viralt svar
Patienter som återkallade efter att ha fått antiviral terapi (sofosbuvir/velpatasvir/voxilaprevir)
Friska kontroller matchade för ålder och sex med de andra grupperna

Vad mäter studien?

Primära resultatmått

Resultatmått
Åtgärdsbeskrivning
Tidsram
1. Beskriv sammansättningen och strukturen i tarmmikrobiota hos patienter med kronisk HCV utan cirrhos (icke-behandlad, återfall och de som uppnådde SVR) i jämförelse med deras matchande friska kontroller
Tidsram: 4-5 veckor
Färska avföringsprover samlades in på morgonen från alla deltagare och bearbetades med 1 timme och 5 ml venöst blod samlat. Mikrobiota -profilering gjordes genom DNA -extraktion och PCR -amplifiering av 16S rRNA -gen sedan bedömning genom agarosgelelektrofores.PCR -produktrening och PCR -produktpecction gjordes. Analys av sekvensen som gjordes genom Illumina Miseq metagenomics Arbetsflöde sedan bearbetning, analys, datakombination och förbehandling gjordes.
4-5 veckor

Samarbetspartners och utredare

Det är här du hittar personer och organisationer som är involverade i denna studie.

Studieavstämningsdatum

Dessa datum spårar framstegen för inlämningar av studieposter och sammanfattande resultat till ClinicalTrials.gov. Studieposter och rapporterade resultat granskas av National Library of Medicine (NLM) för att säkerställa att de uppfyller specifika kvalitetskontrollstandarder innan de publiceras på den offentliga webbplatsen.

Studera stora datum

Studiestart (Faktisk)

13 maj 2022

Primärt slutförande (Faktisk)

20 mars 2024

Avslutad studie (Faktisk)

30 augusti 2024

Studieregistreringsdatum

Först inskickad

3 februari 2025

Först inskickad som uppfyllde QC-kriterierna

11 februari 2025

Första postat (Faktisk)

25 mars 2025

Uppdateringar av studier

Senaste uppdatering publicerad (Faktisk)

25 mars 2025

Senaste inskickade uppdateringen som uppfyllde QC-kriterierna

11 februari 2025

Senast verifierad

1 februari 2025

Mer information

Termer relaterade till denna studie

Plan för individuella deltagardata (IPD)

Planerar du att dela individuella deltagardata (IPD)?

OBESLUTSAM

Läkemedels- och apparatinformation, studiedokument

Studerar en amerikansk FDA-reglerad läkemedelsprodukt

Nej

Studerar en amerikansk FDA-reglerad produktprodukt

Nej

produkt tillverkad i och exporterad från U.S.A.

Nej

Denna information hämtades direkt från webbplatsen clinicaltrials.gov utan några ändringar. Om du har några önskemål om att ändra, ta bort eller uppdatera dina studieuppgifter, vänligen kontakta register@clinicaltrials.gov. Så snart en ändring har implementerats på clinicaltrials.gov, kommer denna att uppdateras automatiskt även på vår webbplats .

Prenumerera