此页面是自动翻译的,不保证翻译的准确性。请参阅 英文版 对于源文本。

直接作用抗病毒药对HCV相关慢性肝病患者的肠道菌群模式的影响

2025年2月11日 更新者:Omnia Mohammed Kamal Eldin、Assiut University

最近引入直接作用抗病毒药(DAA)疗法已大大改变了HCV感染的治愈率,即使在难以治疗受试者和患有严重合并症的受试者中。 越来越多的研究也表明肝脏刚度有所改善,肝脏僵硬是肝纤维化的替代标记,在消除了HCV后。 这可能会对这些患者的肠道肝轴产生有益的影响,并可能进一步促进疾病的进展,从而可能影响并发症的未来发生。 肝硬化患者的肠道菌群多样性低于健康受试者,与估计相比,HCV感染的治疗方法显着改善了,与底线相比,观察到整体肠道肠道菌群组成的变化。 治疗后,潜在的致病细菌(肠杆菌科,肠球菌和葡萄球菌)的丰度减少。

研究目的:

1以确定患有 /没有肝肝硬化的HCV感染患者肠道菌群的变化。

研究概览

地位

完全的

详细说明

It is a case-control study that was conducted on 8 non-cirrhotic chronically infected patients with hepatitis C virus (group I), 4 patients successfully treated from HCV after receiving 12 weeks of DAAs (Sofosbuvir, Daclatasvir) who achieved sustained viral response (group II), and 4 patients who relapsed after 12 weeks of DAAs (Sofosbuvir/Velpatasvir/Voxilaprevir) (group III). Fourteen healthy control subjects who were matched for age and sex (group VI) were enrolled after obtaining their informed consent. Detailed history taking, clinical examination, abdominal ultrasound (U/S), and laboratory investigations including complete blood count (CBC), liver function tests, and serum transaminases were determined for all patients.

Inclusion criteria: patients of any age or sex who was proved to be infected with hepatitis C virus without treatment, those who received treatment and sustained viral response and those who received treatment and relapsed and healthy controls were enrolled in the study Exclusion Criteria Patients receiving antibiotic treatment, probiotics, or any other medical treatment influencing intestinal microbiota 1 month before the start of the study as well as patients with any other viral infection as HBV, and HIV were excluded.

Specimen collection Fresh stool samples were collected in the morning from all the participants and were processed within 1 h after defecation. An aseptic technique was used for the collection of all specimens, with care taken to avoid contamination.

Also, 5ml of venous blood under aseptic conditions was collected from each patient for estimation of the different laboratory parameters.

1.4: Quantitative assessment of the RNA viral load HCV-RNA level was detected using real-time polymerase chain reaction (RT-PCR) (Bioline International, UK) with a lower limit of detection of 15 IU/ml. (Alter.,2007).

1.5: Microbiota Profiling 1.5.1.DNA Extraction

Immediately after collection, Genomic DNA was extracted from the stool samples using the Invitrogen PureLink Microbiome DNA Purification Kit (Thermo Fisher Scientific, Cat #A29790). The stool samples were mixed thoroughly to create a homogenous sample before weighing and transferring the measured amount of the feces (0.2± 0.05 g) to the bead tube, then we followed instructions as directed by the manufacturer as follows:

We performed the procedure at room temperature (20-25 ºC).1. The lysate was prepared as following:

  1. Sample (0.2±0.05 g) and S1-Lysis Buffer (600µL) were added to the bead tube, the total mixture was 800µL,
  2. The bead tubes were vortexed to ensure that the samples were thoroughly dispersed in the liquid.
  3. One hundred µL of S2 -Lysis Enhancer was added and vortexed briefly.

e. Bead tubes were vortexed for 10 minutes at maximum speed on the vortex mixer using hands-free adapter and horizontal agitation.

f. The bead tubes were centrifuged at 14,000× g for 5 minutes at room temperature.

g. Then, 400µL of the supernatant was transferred to a clean microcentrifuge tube.

h. After that, 250µL of S3- cleanup Buffer was added to the tubes and vortexed immediately to ensure even dispersion of S3 and uniform precipitation of inhibitors.

i. The bead tubes were centrifuged at 14,000× g for 2 minutes at room temperature.

j. Then 500µL of the supernatant was transferred to a clean microcentrifuge tube, with care to avoid the pellet and any debris.

2. Then, DNA was bound to the column as following :

  1. A total of 900µL of S4-Binding Buffer was added to the tubes and vortexed briefly.
  2. Then, 700µL of the sample mixture was loaded onto a spin column-tube assembly, and centrifuged at 14,000× g for 1 minute.
  3. The flow-through was discarded and the previous step was repeated with the remaining sample mixture.

We ensured that the entire sample mixture passed into the collection tube by inspecting the column and centrifuging again at 14,000 × g for 1 minute.

3. The DNA was washed and eluted as following:

  1. The spin column was placed in a clean collection tube, 500µL of S5- Wash Buffer was added, and then the spin column- tube was centrifuged assembly at 14.000 × g for 1 minute.
  2. the flow-through was discarded-, and then the spin column-tube was centrifuged assembly at 14.000 × g for 30 seconds, we did the second centrifugation to optimize the removal of S5- wash Buffer which could interfere with downstream applications.
  3. The spin column was placed in a clean tube, 100µL of S6- Elution Buffer was added, and then the tubes were incubated at room temperature for 1 minute.
  4. The spin column-tube was centrifuged assembly at 14.000× g for 1 minute then the column was discarded.

The purified DNA in the tube was used for the following downstream applications.

1.5.2.PCR amplification of 16S rRNA gene

a. PCR optimization

Immediately after DNA extraction, PCR was conducted to amplify hyper variable regions V3-V4 of 16S rRNA gene using the following primers with Illumina adapters (underlined):

Forward Primer 5'TCGTCGGCAGCGTCAGATGTGTATAAGAGACAGCCTACGGGNGGCWGCAG3' Reverse Primer 5'GTCTCGTGGGCTCGGAGATGTGTATAAGAGACAGGACTACHVGGGTATCTAATC 3' PCR reactions were performed for preparing 16SrRNA for sequencing in 25μL reactions with 0.8μL for each forward and reverse primers (10μM, Metabion, Germany), 3 μL of template DNA, and 12.5 μL of 1×of Hot Master Mix (Genedirex PCR supermix). 1.5.3. Agarose gel electrophoresis All PCR amplicons were assessed by loading 5 μL of the PCR product into wells of 1% (w/v) Agarose. Five μL of Hyper Ladder l marker was loaded into the first well. Five μL of the PCR reaction mixture from each sample was inserted into the appropriate wells of the gel. The gel was then immersed in Tris-Borate-EDTA (TBE) buffer and electrophoresed at 90 V for separation of the fragments. The gel was visualized after excitation under UV transillumination. The amplified products were sent to IGA Technology Services (Udine, Italy) for further processing.

1.5.4. PCR product purification (PCR Clean-Up) Five μL of the PCR reaction mixture from each sample was mixed with 2 μL of loading buffer and after that PCR products were purified using the Agincourt XP Ampure Beads (Beckam Coulter).

1.5.5. PCR Product sequencing After amplicon purification, dual indices and Illumina sequencing adapters were attached using the Nextera XT Index Kit (Illumina). The quality of the final products was assessed using a Bioanalyzer 2100 (Agilent Technologies, USA) and, after their quantification with a Qubit (Invitrogen), the samples were pooled in equal proportions and sequenced paired-end in an Illumina MiSeq with 600 cycles (300 cycles for each paired read and 12 cycles for the barcode sequence) at IGA Technology Services (Udine, Italy).

1.6. Sequence analysis 1.6.1. Sequence analysis with Illumina MiSeq metagenomics workflow

IGA Technology Services performed sequences analysis using the metagenomics workflow of MiSeq Reporter v2.3 (Illumina). Briefly, sequences were demultiplexed based on index sequences. FASTQ files were generated with a Quality Score Trim sample-sheet set, to make trimming. The classification step was performed using Classify Reads, a proprietary Illumina algorithm that provides a species-level classification for paired-end reads. The process involves matching short subsequences of the reads (words) to a set of 16S reference sequences. The accumulated word matches for each read were used to assign reads to a particular taxonomic classification. The taxonomy database for the metagenomics workflow was an Illumina-curated version of the Greengenes database (greengenes. secondgenome. com/downloads/ database/13_5).

1.6.2. Sequence preprocessing and analysis Illumina platform generated two reads for the forward and reverse direction of the V3-V4 hyper-variable region of the 16S rRNA gene. Sequence filtering and analysis of sequence data were essentially performed with the MOTHUR (v. 1.35.1) software package (Schloss et al.,2009).

1.6.3. Data combination and preprocessing Firstly, Forward and reverse reads for each sample were combined in a single contig separately and samples from each site were combined in a single dataset for each site. This was performed using the (commands make. Contigs, make. file, and make. group) respectively.

1.6.4. Quality value checking and filtering

Quality filtering included rejecting reads <420nt and >470 nt, excluding homopolymer runs >8nt, and 0 ambiguous bases, and requiring minimum average Phred quality ≥25 using (command trim. seqs).

Illumina may generate many copies of the same sequence which were considered as duplicated sequences. Because it's computationally wasteful to align the same thing a bazillion times, we unique our sequences using the (command unique.seqs).

1.6.5. Sequence aligning to a reference database SILVA database was customized to the V3-V4 region of 16s rRNA gene using the (command pcr.seqs), corresponding to the same regions in Escherichia coli starting from 6426 and ending at 27645. After that, our sequences were aligned to reference database reference sequences (http://www.arb-silva.de/) using (command align.seqs). (Quast et al.,2012)

1.6.6. Sequence deduplication, denoising, and chimera removal Duplicate sequences were merged with previous unique sequences by running (command unique.seqs). To denoise our sequences, precluster the sequences was done using the (command pre. cluster) allowing for up to 2 differences between sequences. This command split the sequences by group and then sorted them by abundance and went from most abundant to least and identified sequences that were within 2 nt of each other.

Chimeras sequences were removed using the MOTHUR implementation of the UCHIME algorithm (Edgar et al.,2011). The (command chimera. chime) detected chimeric sequence which was removed by (command get.seqs).

1.6.7. Sequence classification Sequences were aligned to the SILVA taxonomy using a Bayesian classifier with the (command classify.seqs). (Wang et al.,2007).

1.7 Bacterial diversity analysis using QIIME2 1.7.1 Alpha diversity analysis The diversity analytic plugin within QIIME2 uses a random resampling of 32,084 sequences per sample for even sampling depth. Estimates of ecological indices included: rarefaction curves, the number of observed OTUs (species), and the Shannon index, representing common measures of alpha diversity. Rarefaction of the alpha diversity, defining the number of OTUs detected as a function of sampling effort, was performed to confirm that sampling depth gave sufficient coverage to accurately analyze the dominant members of bacterial communities. Alpha diversity was analyzed using two approaches; the number of observed species representing richness and the Shannon diversity index representing richness and evenness of communities.

1.7.2 Beta diversity analysis Beta diversity analyses were estimated to determine phylogenetic distances between communities including weighted UniFrac distance matrices (Lozupone et al.,2011).

In the weighted UniFrac analysis, the relative abundance of taxa found in the sample is counted, so less abundant OTU has less weight in the analysis.

UniFrac principal coordinates analysis (PCoA) was performed for the interpretation of the UniFrac distance matrix. Phyloseq and ggpubr, R packages were used for the calculation and plotting of α and β diversity (McMurdie and Holmes.,2013). Finally, significance testing of sample clustering was assessed by Permutational Multivariate Analysis of Variance (Adonis R,package Vegan) (Anderson.,2001) using the weighted UniFrac distance matrix in QIIME by compare_categories.py script.

1.8. Core microbiome analysis: Discovering a core microbiome is very important for understanding the stable, consistent elements across complex microbic assemblages. A core is often defined as the suite of members shared among microbial consortia from similar habitats and is represented by the overlapping areas of circles in Venn diagrams, in which each circle contains the membership of the sample or habitats being compared (Shade and Handelsman.,2012).

1.9. Identification of Biomarkers and Discriminative Taxa LefSe exemplifies the Linear discriminant analysis (LDA) Effect Size method. LEfSe is an algorithm for high-dimensional biomarker identification and characterization that identifies features such as genes, pathways, or taxa that explain the differences between two or more biological states. The idea of LefSe is to start to define significantly differentially abundant OTUs, then use the Wilcoxon rank sum test to check for consistency in the differential abundance, and finally estimate an effect size per feature using linear discriminant analysis. This method assumes that microbial communities can be separated by a linear combination of OTUs (Segata et al.,2011).

1.10. Correlation between community member The Spearman's Rank Correlation Coefficient is used to discover the strength of a link between two sets of data. The correlation coefficient has a maximum value of 1, indicating a perfect positive association between the data sets, and a minimum value of -1 indicating a perfect negative association between data sets. A value of 0 indicates no association between the ranks for the observed values (Farlie., 1960).

研究类型

观察性的

注册 (实际的)

30

联系人和位置

本节提供了进行研究的人员的详细联系信息,以及有关进行该研究的地点的信息。

学习地点

      • Assiut、埃及
        • Assiut University Hospitals

参与标准

研究人员寻找符合特定描述的人,称为资格标准。这些标准的一些例子是一个人的一般健康状况或先前的治疗。

资格标准

适合学习的年龄

  • 孩子
  • 成人
  • 年长者

接受健康志愿者

是的

取样方法

非概率样本

研究人群

this study included four arms of patients :1- patients with chronic HCV infection who has not received any medications. @- patients who are cure from HCV infection after receiving days therapy.3- patients who have relapsed after treating HCV infection.4- healthy controls

描述

Inclusion Criteria: non-cirrhotic chronically infected patients with hepatitis C virus (group I), patients who are successfully treated from HCV after receiving 12 weeks of DAAs (Sofosbuvir, Daclatasvir) who achieved SVR (group II), and patients who relapsed after 12 weeks of DAAs(Sofosbuvir/Velpatasvir/Voxilaprevir) (group III). healthy control subjects who were matched for age and sex (group VI) were enrolled after obtaining their informed consent. - Exclusion Criteria:Patients receiving antibiotic treatment, probiotics, or any other medical treatment influencing intestinal microbiota 1 month before the start of the study as well as patients with any other viral infection as HBV, and HIV were excluded.

-

学习计划

本节提供研究计划的详细信息,包括研究的设计方式和研究的衡量标准。

研究是如何设计的?

设计细节

队列和干预

团体/队列
慢性HCV感染的患者
患者尚未收到HCV感染的任何药物
接受HCV感染治疗并达到持续病毒反应的患者
这些患者接受了12周的HCV和持续病毒反应治疗(Sofosbuvir,Daclatasvir)
接受HCV治疗后复发并且无法维持病毒反应的患者
接受抗病毒治疗后复发的患者(Sofosbuvir/Velpatasvir/Voxilaprevir)
与其他小组相匹配的健康对照

研究衡量的是什么?

主要结果指标

结果测量
措施说明
大体时间
1。描述慢性HCV患者的肠道菌群的组成和结构,而没有肝硬化(未处理,复发,以及获得SVR的人)与其匹配的健康对照相比
大体时间:4-5周
所有参与者的早晨收集新鲜的粪便样品,并在1小时中进行处理,并在1小时收集的静脉血液中进行。Microbobiota分析是通过DNA提取进行的,然后通过16S rRNA基因进行PCR扩增,然后通过琼脂糖凝胶电泳进行评估。PCR产物纯化和PCR产物序列完成了。 通过Illumina Miseq元基因组学完成的序列进行分析,然后进行处理,分析,数据组合和预处理。使用QIIME2和核心微生物分析进行的细菌多样性最终完成
4-5周

合作者和调查者

在这里您可以找到参与这项研究的人员和组织。

研究记录日期

这些日期跟踪向 ClinicalTrials.gov 提交研究记录和摘要结果的进度。研究记录和报告的结果由国家医学图书馆 (NLM) 审查,以确保它们在发布到公共网站之前符合特定的质量控制标准。

研究主要日期

学习开始 (实际的)

2022年5月13日

初级完成 (实际的)

2024年3月20日

研究完成 (实际的)

2024年8月30日

研究注册日期

首次提交

2025年2月3日

首先提交符合 QC 标准的

2025年2月11日

首次发布 (实际的)

2025年3月25日

研究记录更新

最后更新发布 (实际的)

2025年3月25日

上次提交的符合 QC 标准的更新

2025年2月11日

最后验证

2025年2月1日

更多信息

与本研究相关的术语

其他相关的 MeSH 术语

其他研究编号

  • 04_2023_200392

计划个人参与者数据 (IPD)

计划共享个人参与者数据 (IPD)?

未定

药物和器械信息、研究文件

研究美国 FDA 监管的药品

不

研究美国 FDA 监管的设备产品

不

在美国制造并从美国出口的产品

不

此信息直接从 clinicaltrials.gov 网站检索,没有任何更改。如果您有任何更改、删除或更新研究详细信息的请求,请联系 register@clinicaltrials.gov. clinicaltrials.gov 上实施更改,我们的网站上也会自动更新.

订阅