Effect of Different Resin Composite Packing Techniques on Pulp Condition (Randomized Clinical Trial)
2026年7月4日 更新者：Esraa Mohamed Zaki、October 6 University
The goal of this clinical trial is to evalute the effect of different resin composite packing techniques on pulpal condition in patient with deep carious occlusal cavities in their molar teeth. The main questions it aims to answer are:
- Do composite packing technquies cause pulpal inflammatory response ?
- Do composite packing technquies cause post operative pain ? Researchers will compare elastic cavity liner packing techniques to sonic activated and flowable bulk packing techniques to see their effect on pulp condition.
Participants will :
- Provide an honest medial and dental history to undergo the restorative procedures .
- Report subjective symptons.
- Attend all scheduled follow-ups visit for pulp assessment.
調査の概要
状態
完了
条件
詳細な説明
This clinical study evaluates the impact of various resin composite packing techniques on pulp inflammation and post-operative condition, specifically comparing the biological and mechanical outcomes of incremental layering of packable composite with flowable liner versus modern bulk-fill strategies as SoniFill bulk fill resin composite and SDR bulk fill composite.
The research involves preparing standardized cavities in clinical participants and restoring them using specialized resin materials to determine how different application methods influence polymerization shrinkage stress, marginal adaptation, and dentinal tubule fluid movement.
To quantify the subclinical inflammatory response of the pulp, Gingival Crevicular Fluid (GCF) samples are collected from the gingival sulcus of the restored teeth at baseline and specific post-operative intervals (immediately and after one week ) to analyze changes in inflammatory mediators or biomarkers.
Simultaneously, the patient's subjective experience of post-operative pain and thermal sensitivity is recorded using the Visual Analog Scale (VAS), where participants mark their level of discomfort on a 10-cm line to provide measurable data on clinical symptoms.
By correlating these objective biochemical markers from the GCF with the subjective VAS scores and clinical sensibility testing, the study aims to identify the most effective packing protocol for minimizing C-factor-related stress and protecting the dentin-pulp complex from inflammatory responses.
研究の種類
介入
入学 (実際)
30
段階
- フェーズ 4
連絡先と場所
このセクションには、調査を実施する担当者の連絡先の詳細と、この調査が実施されている場所に関する情報が記載されています。
研究場所
-
-
-
Giza、エジプト、3235142
- Ain Shams University
-
-
参加基準
研究者は、適格基準と呼ばれる特定の説明に適合する人を探します。これらの基準のいくつかの例は、人の一般的な健康状態または以前の治療です。
適格基準
就学可能な年齢
- 大人
健康ボランティアの受け入れ
いいえ
説明
Inclusion Criteria:
- Both genders.
- Systemically healthy patients.
- Good oral hygiene.
- Available for follow-up appointments.
- Asymptomatic permanent molars with deep occlusal caries ICDAS 5 or 6 carious lesions and healthy periodontium, in normal occlusion with no previous restorations related to the teeth and vital with a positive response to cold testing.
Exclusion Criteria:
- Vulnerable populations.
- Tobacco users.
- Medically compromised patients, such as those with diabetes or medications affecting salivary flow were excluded.
- Teeth with prior endodontic treatment, periodontal pockets over 3 mm, or any dental/periodontal therapy within the past 12 months.
研究計画
このセクションでは、研究がどのように設計され、研究が何を測定しているかなど、研究計画の詳細を提供します。
研究はどのように設計されていますか？
デザインの詳細
- 主な目的：処理
- 割り当て：ランダム化
- 介入モデル：並列代入
- マスキング：ダブル
武器と介入
参加者グループ / アーム |
介入・治療 |
|---|---|
|
介入なし：Flowable liner and packable composite
Following proper administration of local anesthesia , cavity preparation is completed according to the study's standardized dimensions.
Isolation is achieved using a rubber dam to ensure a moisture-free operating field.
Selective-etch is performed using 37% phosphoric acid, followed by thorough rinsing and gentle air-drying to leave the dentin moist.
The bonding agent is applied according to the manufacturer's instructions, gently air-thinned to form a uniform layer, and light-cured for the specified duration.
A low-viscosity flowable composite liner is applied to the pulpal floor generally not exceeding 1-2 mm in thickness.
he remaining cavity depth is restored using a packable resin composite using an incremental layering technique to minimize polymerization shrinkage stress.
Each increment is meticulously adapted to the cavity walls using a hand plugger, anatomically contoured, and light-cured individually from the occlusal surface.
|
|
|
実験的：Sonic Fill bulk fill resin composite
The SonicFill bulk-fill resin composite is delivered directly into the cavity preparation using its specialized, ultrasonically activated handpiece. The material is placed in a single bulk increment of up to 5 mm, completely filling the cavity to the occlusal margin. Once the sonic activation stops, the material reverts to a sculptable, non-slumping consistency, allowing immediate anatomical contouring. The entire bulk increment is then light-cured from the occlusal surface according to the manufacturer's recommended exposure time and intensity. |
The SonicFill bulk-fill resin composite is delivered directly into the cavity preparation using its specialized, ultrasonically activated handpiece.
The material is placed in a single bulk increment of up to 5 mm, completely filling the cavity to the occlusal margin.
Once the sonic activation stops, the material reverts to a sculptable, non-slumping consistency, allowing immediate anatomical contouring.
The entire bulk increment is then light-cured from the occlusal surface according to the manufacturer's recommended exposure time and intensity
|
|
実験的：SDR flowable bulk fill resin composite
SDR bulk-fill flowable composite is dispensed directly into the cavity using the manufacturer's syringe tip, starting from the deepest part of the preparation to avoid air entrapment. Due to its self-leveling properties and low polymerization stress, it is placed in a single bulk increment of up to 4 mm, leaving approximately 1.5-2 mm of occlusal space for the capping layer. The material is then light-cured. The remaining occlusal volume is restored using a conventional packable resin composite to act as the wear-resistant enamel replacement. Then the capping layer is adapted to the cavosurface margins, anatomically contoured to replicate correct tooth morphology, and light-cured. |
SDR bulk-fill flowable composite is dispensed directly into the cavity using the manufacturer's syringe tip, starting from the deepest part of the preparation to avoid air entrapment.
Due to its self-leveling properties and low polymerization stress, it is placed in a single bulk increment of up to 4 mm, leaving approximately 1.5-2 mm of occlusal space for the capping layer.
The material is then light-cured.
The remaining occlusal volume is restored using a conventional packable resin composite to act as the wear-resistant enamel replacement.
Then the capping layer is adapted to the cavosurface margins, anatomically contoured to replicate correct tooth morphology, and light-cured.
|
この研究は何を測定していますか？
主要な結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
Pulpal inflammatory responses.
時間枠：From enrollment to the end of treatment at one year.
|
Immuno-histological analysis of the crevicular fluid to evalute pulpal inflammatory response by quantifying the volume of the pro-inflammatory cytokine TNF-α in GCF that reflect pulpal inflmmation in response to different resin composite packing techniques.
|
From enrollment to the end of treatment at one year.
|
二次結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
Post-operative pain.
時間枠：From enrollment to the end of treatment at one year.
|
This evaluation is conducted using the Visual Analog Scale (VAS), a validated 10-cm horizontal line where "0" represents "no pain" and "10" represents "the worst imaginable pain."
Participants are instructed to record their subjective perception of discomfort at specific post-operative intervals (before treatment and one week following restorative procedures ).
To ensure a comprehensive assessment, pain is categorized into spontaneous pain and provoked pain (sensitivity to thermal stimuli or masticatory pressure).
This subjective data is then correlated with the biochemical findings from the Gingival Crevicular Fluid (GCF) samples.
|
From enrollment to the end of treatment at one year.
|
協力者と研究者
ここでは、この調査に関係する人々や組織を見つけることができます。
スポンサー
研究記録日
これらの日付は、ClinicalTrials.gov への研究記録と要約結果の提出の進捗状況を追跡します。研究記録と報告された結果は、国立医学図書館 (NLM) によって審査され、公開 Web サイトに掲載される前に、特定の品質管理基準を満たしていることが確認されます。
主要日程の研究
研究開始 (実際)
2025年2月1日
一次修了 (実際)
2026年1月1日
研究の完了 (実際)
2026年1月1日
試験登録日
最初に提出
2026年7月4日
QC基準を満たした最初の提出物
2026年7月4日
最初の投稿 (実際)
2026年7月10日
学習記録の更新
投稿された最後の更新 (実際)
2026年7月10日
QC基準を満たした最後の更新が送信されました
2026年7月4日
最終確認日
2026年7月1日
詳しくは
本研究に関する用語
その他の研究ID番号
- FDASU-Rec IM012562
医薬品およびデバイス情報、研究文書
米国FDA規制医薬品の研究
いいえ
米国FDA規制機器製品の研究
いいえ
この情報は、Web サイト clinicaltrials.gov から変更なしで直接取得したものです。研究の詳細を変更、削除、または更新するリクエストがある場合は、register@clinicaltrials.gov。 までご連絡ください。 clinicaltrials.gov に変更が加えられるとすぐに、ウェブサイトでも自動的に更新されます。