Effect of Different Resin Composite Packing Techniques on Pulp Condition (Randomized Clinical Trial)
4 de julho de 2026 atualizado por: Esraa Mohamed Zaki, October 6 University
The goal of this clinical trial is to evalute the effect of different resin composite packing techniques on pulpal condition in patient with deep carious occlusal cavities in their molar teeth. The main questions it aims to answer are:
- Do composite packing technquies cause pulpal inflammatory response ?
- Do composite packing technquies cause post operative pain ? Researchers will compare elastic cavity liner packing techniques to sonic activated and flowable bulk packing techniques to see their effect on pulp condition.
Participants will :
- Provide an honest medial and dental history to undergo the restorative procedures .
- Report subjective symptons.
- Attend all scheduled follow-ups visit for pulp assessment.
Visão geral do estudo
Status
Concluído
Condições
Intervenção / Tratamento
Descrição detalhada
This clinical study evaluates the impact of various resin composite packing techniques on pulp inflammation and post-operative condition, specifically comparing the biological and mechanical outcomes of incremental layering of packable composite with flowable liner versus modern bulk-fill strategies as SoniFill bulk fill resin composite and SDR bulk fill composite.
The research involves preparing standardized cavities in clinical participants and restoring them using specialized resin materials to determine how different application methods influence polymerization shrinkage stress, marginal adaptation, and dentinal tubule fluid movement.
To quantify the subclinical inflammatory response of the pulp, Gingival Crevicular Fluid (GCF) samples are collected from the gingival sulcus of the restored teeth at baseline and specific post-operative intervals (immediately and after one week ) to analyze changes in inflammatory mediators or biomarkers.
Simultaneously, the patient's subjective experience of post-operative pain and thermal sensitivity is recorded using the Visual Analog Scale (VAS), where participants mark their level of discomfort on a 10-cm line to provide measurable data on clinical symptoms.
By correlating these objective biochemical markers from the GCF with the subjective VAS scores and clinical sensibility testing, the study aims to identify the most effective packing protocol for minimizing C-factor-related stress and protecting the dentin-pulp complex from inflammatory responses.
Tipo de estudo
Intervencional
Inscrição (Real)
30
Estágio
- Fase 4
Contactos e Locais
Esta seção fornece os detalhes de contato para aqueles que conduzem o estudo e informações sobre onde este estudo está sendo realizado.
Locais de estudo
-
-
-
Giza, Egito, 3235142
- Ain Shams University
-
-
Critérios de participação
Os pesquisadores procuram pessoas que se encaixem em uma determinada descrição, chamada de critérios de elegibilidade. Alguns exemplos desses critérios são a condição geral de saúde de uma pessoa ou tratamentos anteriores.
Critérios de elegibilidade
Idades elegíveis para estudo
- Adulto
Aceita Voluntários Saudáveis
Não
Descrição
Inclusion Criteria:
- Both genders.
- Systemically healthy patients.
- Good oral hygiene.
- Available for follow-up appointments.
- Asymptomatic permanent molars with deep occlusal caries ICDAS 5 or 6 carious lesions and healthy periodontium, in normal occlusion with no previous restorations related to the teeth and vital with a positive response to cold testing.
Exclusion Criteria:
- Vulnerable populations.
- Tobacco users.
- Medically compromised patients, such as those with diabetes or medications affecting salivary flow were excluded.
- Teeth with prior endodontic treatment, periodontal pockets over 3 mm, or any dental/periodontal therapy within the past 12 months.
Plano de estudo
Esta seção fornece detalhes do plano de estudo, incluindo como o estudo é projetado e o que o estudo está medindo.
Como o estudo é projetado?
Detalhes do projeto
- Finalidade Principal: Tratamento
- Alocação: Randomizado
- Modelo Intervencional: Atribuição Paralela
- Mascaramento: Dobro
Armas e Intervenções
Grupo de Participantes / Braço |
Intervenção / Tratamento |
|---|---|
|
Sem intervenção: Flowable liner and packable composite
Following proper administration of local anesthesia , cavity preparation is completed according to the study's standardized dimensions.
Isolation is achieved using a rubber dam to ensure a moisture-free operating field.
Selective-etch is performed using 37% phosphoric acid, followed by thorough rinsing and gentle air-drying to leave the dentin moist.
The bonding agent is applied according to the manufacturer's instructions, gently air-thinned to form a uniform layer, and light-cured for the specified duration.
A low-viscosity flowable composite liner is applied to the pulpal floor generally not exceeding 1-2 mm in thickness.
he remaining cavity depth is restored using a packable resin composite using an incremental layering technique to minimize polymerization shrinkage stress.
Each increment is meticulously adapted to the cavity walls using a hand plugger, anatomically contoured, and light-cured individually from the occlusal surface.
|
|
|
Experimental: Sonic Fill bulk fill resin composite
The SonicFill bulk-fill resin composite is delivered directly into the cavity preparation using its specialized, ultrasonically activated handpiece. The material is placed in a single bulk increment of up to 5 mm, completely filling the cavity to the occlusal margin. Once the sonic activation stops, the material reverts to a sculptable, non-slumping consistency, allowing immediate anatomical contouring. The entire bulk increment is then light-cured from the occlusal surface according to the manufacturer's recommended exposure time and intensity. |
The SonicFill bulk-fill resin composite is delivered directly into the cavity preparation using its specialized, ultrasonically activated handpiece.
The material is placed in a single bulk increment of up to 5 mm, completely filling the cavity to the occlusal margin.
Once the sonic activation stops, the material reverts to a sculptable, non-slumping consistency, allowing immediate anatomical contouring.
The entire bulk increment is then light-cured from the occlusal surface according to the manufacturer's recommended exposure time and intensity
|
|
Experimental: SDR flowable bulk fill resin composite
SDR bulk-fill flowable composite is dispensed directly into the cavity using the manufacturer's syringe tip, starting from the deepest part of the preparation to avoid air entrapment. Due to its self-leveling properties and low polymerization stress, it is placed in a single bulk increment of up to 4 mm, leaving approximately 1.5-2 mm of occlusal space for the capping layer. The material is then light-cured. The remaining occlusal volume is restored using a conventional packable resin composite to act as the wear-resistant enamel replacement. Then the capping layer is adapted to the cavosurface margins, anatomically contoured to replicate correct tooth morphology, and light-cured. |
SDR bulk-fill flowable composite is dispensed directly into the cavity using the manufacturer's syringe tip, starting from the deepest part of the preparation to avoid air entrapment.
Due to its self-leveling properties and low polymerization stress, it is placed in a single bulk increment of up to 4 mm, leaving approximately 1.5-2 mm of occlusal space for the capping layer.
The material is then light-cured.
The remaining occlusal volume is restored using a conventional packable resin composite to act as the wear-resistant enamel replacement.
Then the capping layer is adapted to the cavosurface margins, anatomically contoured to replicate correct tooth morphology, and light-cured.
|
O que o estudo está medindo?
Medidas de resultados primários
Medida de resultado |
Descrição da medida |
Prazo |
|---|---|---|
|
Pulpal inflammatory responses.
Prazo: From enrollment to the end of treatment at one year.
|
Immuno-histological analysis of the crevicular fluid to evalute pulpal inflammatory response by quantifying the volume of the pro-inflammatory cytokine TNF-α in GCF that reflect pulpal inflmmation in response to different resin composite packing techniques.
|
From enrollment to the end of treatment at one year.
|
Medidas de resultados secundários
Medida de resultado |
Descrição da medida |
Prazo |
|---|---|---|
|
Post-operative pain.
Prazo: From enrollment to the end of treatment at one year.
|
This evaluation is conducted using the Visual Analog Scale (VAS), a validated 10-cm horizontal line where "0" represents "no pain" and "10" represents "the worst imaginable pain."
Participants are instructed to record their subjective perception of discomfort at specific post-operative intervals (before treatment and one week following restorative procedures ).
To ensure a comprehensive assessment, pain is categorized into spontaneous pain and provoked pain (sensitivity to thermal stimuli or masticatory pressure).
This subjective data is then correlated with the biochemical findings from the Gingival Crevicular Fluid (GCF) samples.
|
From enrollment to the end of treatment at one year.
|
Colaboradores e Investigadores
É aqui que você encontrará pessoas e organizações envolvidas com este estudo.
Patrocinador
Datas de registro do estudo
Essas datas acompanham o progresso do registro do estudo e os envios de resumo dos resultados para ClinicalTrials.gov. Os registros do estudo e os resultados relatados são revisados pela National Library of Medicine (NLM) para garantir que atendam aos padrões específicos de controle de qualidade antes de serem publicados no site público.
Datas Principais do Estudo
Início do estudo (Real)
1 de fevereiro de 2025
Conclusão Primária (Real)
1 de janeiro de 2026
Conclusão do estudo (Real)
1 de janeiro de 2026
Datas de inscrição no estudo
Enviado pela primeira vez
4 de julho de 2026
Enviado pela primeira vez que atendeu aos critérios de CQ
4 de julho de 2026
Primeira postagem (Real)
10 de julho de 2026
Atualizações de registro de estudo
Última Atualização Postada (Real)
10 de julho de 2026
Última atualização enviada que atendeu aos critérios de controle de qualidade
4 de julho de 2026
Última verificação
1 de julho de 2026
Mais Informações
Termos relacionados a este estudo
Palavras-chave
Termos MeSH relevantes adicionais
Outros números de identificação do estudo
- FDASU-Rec IM012562
Informações sobre medicamentos e dispositivos, documentos de estudo
Estuda um medicamento regulamentado pela FDA dos EUA
Não
Estuda um produto de dispositivo regulamentado pela FDA dos EUA
Não
Essas informações foram obtidas diretamente do site clinicaltrials.gov sem nenhuma alteração. Se você tiver alguma solicitação para alterar, remover ou atualizar os detalhes do seu estudo, entre em contato com register@clinicaltrials.gov. Assim que uma alteração for implementada em clinicaltrials.gov, ela também será atualizada automaticamente em nosso site .