이 페이지는 자동 번역되었으며 번역의 정확성을 보장하지 않습니다. 참조하십시오 영문판 원본 텍스트의 경우.

Evaluation of Composite Veneers Fabricated by 3D Printing and Milling Technologies

2026년 8월 10일 업데이트: youssef alaa

Evaluation of Composite Veneers Fabricated by 3D Printing and Milling Technologies (Randomized Controlled Clinical Trial & In-Vitro Study)

The clinical study aimed to evaluate the clinical performance, color stability, and wear of indirect composite veneers produced using 3D printing and milling technologies.

연구 개요

상태

완전한

정황

개입 / 치료

상세 설명

A total of fifty-six anterior indirect veneers will be fabricated using 3D printing and milling technologies. The veneers will be divided into two groups according to the technique of fabrication. Group I: 28 veneers will be done using 3D printing technology (VarseoSmile TriniQ, Bego), and group II: 28 veneers will be done using milling technology (Cerasmart 270, GC). Veneer restorations will be fabricated checked, and cemented, then will be evaluated using the modified FDI criteria at baseline, three months, six months, and one year. Moreover, color stability and surface wear of the restorations will be evaluated in each follow-up session.

연구 유형

중재적

등록 (실제)

14

단계

  • 해당 없음

연락처 및 위치

이 섹션에서는 연구를 수행하는 사람들의 연락처 정보와 이 연구가 수행되는 장소에 대한 정보를 제공합니다.

연구 장소

  • 이집트
      • Alexandria, 이집트
        • Faculty of dentistry, Alexandria university

참여기준

연구원은 적격성 기준이라는 특정 설명에 맞는 사람을 찾습니다. 이러한 기준의 몇 가지 예는 개인의 일반적인 건강 상태 또는 이전 치료입니다.

자격 기준

공부할 수 있는 나이

  • 성인

건강한 자원 봉사자를 받아들입니다

아니

설명

Inclusion Criteria:

  • Healthy adult patients aged 18 to 45 years.
  • Patients requiring veneer restorations due to discoloration, misalignment, tooth malformation or having irregular tooth shape that can be treated without full coverage.
  • Patients meeting the criteria for Class I or Class II veneers according to the LeSage veneer classification system.
  • Patients requiring veneers restorations on their bilateral maxillary anterior teeth.
  • The selected teeth should be vital with absence of clinical signs and symptoms of periapical pathology.
  • Patients having a normal occlusal relationship between upper and lower teeth (class I Angle classification).
  • Patients capable of tolerating rubber dam applications.
  • Patients willing to attend regular follow-up appointments.

Exclusion Criteria:

  • Bad oral hygiene (Oral Hygiene Index Simplified >3).
  • Non-vital teeth or endodontically treated teeth.
  • Severe periodontal disease.
  • Patients with para-functional habits (e.g., bruxism, attrition, wear facets).
  • Dentin exposure more than 20% of the prepared surface for veneer.
  • Prescence of smoking/vaping habits

공부 계획

이 섹션에서는 연구 설계 방법과 연구가 측정하는 내용을 포함하여 연구 계획에 대한 세부 정보를 제공합니다.

연구는 어떻게 설계됩니까?

디자인 세부사항

  • 주 목적: 치료
  • 할당: 무작위
  • 중재 모델: 병렬 할당
  • 마스킹: 더블

무기와 개입

참가자 그룹 / 팔
개입 / 치료
활성 비교기: Group I: 28 veneers will be done using 3D printing technology (VarseoSmile TriniQ, Bego)
다른: Group I (n=28): were restored with VarseoSmile TriniQ, Bego
A total of fifty-six anterior indirect veneers will be fabricated using 3D printing and milling technologies. The veneers will be divided into two groups according to the technique of fabrication. Group I: 28 veneers will be done using 3D printing technology (VarseoSmile TriniQ, Bego), and group II: 28 veneers will be done using milling technology (Cerasmart 270, GC). Veneer restorations will be fabricated checked, and cemented, then will be evaluated using the modified FDI criteria at baseline, three months, six months, and one year. Moreover, color stability and surface wear of the restorations will be evaluated in each follow-up session.
활성 비교기: group II: 28 veneers will be done using milling technology (Cerasmart 270, GC)
다른: Group II (n=28): were restored with Cerasmart 270, GC
A total of fifty-six anterior indirect veneers will be fabricated using 3D printing and milling technologies. The veneers will be divided into two groups according to the technique of fabrication. Group I: 28 veneers will be done using 3D printing technology (VarseoSmile TriniQ, Bego), and group II: 28 veneers will be done using milling technology (Cerasmart 270, GC). Veneer restorations will be fabricated checked, and cemented, then will be evaluated using the modified FDI criteria at baseline, three months, six months, and one year. Moreover, color stability and surface wear of the restorations will be evaluated in each follow-up session.

연구는 무엇을 측정합니까?

주요 결과 측정

결과 측정
측정값 설명
기간
The functional properties of the examined veneer restorations
기간: 1 year
All veneers were assessed clinically at 1 week (baseline) and subsequently at 3, 6, and 12 months, following the FDI evaluation criteria and scoring system, which indicates: Functional properties: (F1) Fracture of material and retention. (F2) Marginal adaptation. (F3) Proximal contact point. (F4) Form and contour. (F5) Occlusion and wear. Each evaluated property was scored according to the FDI criteria using the following clinical scores: Score 1: Clinically excellent/very good (VG), Score 2: Clinically good (CG), score 3: Clinically satisfactory (CS), score 4: Clinically unsatisfactory (CU), score 5: Clinically poor (PO).
1 year
The biological properties of the examined veneer restorations
기간: 1 year
All Veneers were assessed clinically at 1 week (baseline) and subsequently at 3, 6, and 12 months, following the revised FDI evaluation criteria and scoring system, which indicates: Biological properties (B1) Caries at restoration margins. (B2) Dental hard tissue defects at the restoration margin. (B3) Postoperative hypersensitivity and pulpal status. Each evaluated property was scored according to the FDI criteria using the following clinical scores: Score 1: Clinically excellent/very good (VG), Score 2: Clinically good (CG), Score 3: Clinically satisfactory (CS), Score 4: Clinically unsatisfactory (CU), Score 5: Clinically poor (PO).
1 year
The aesthetic properties of the examined veneers
기간: 1 year
All veneers were assessed clinically at 1 week (baseline) and subsequently at 3, 6, and 12 months, following the FDI evaluation criteria and scoring system, which indicates: Aesthetic properties: (A1) Surface luster and surface texture. (A2) Marginal staining. (A3) Color match. Each evaluated property was scored according to the FDI criteria using the following clinical scores: Score 1: Clinically excellent/very good (VG), Score 2: Clinically good (CG), Score 3: Clinically satisfactory (CS), Score 4: Clinically unsatisfactory (CU), Score 5: Clinically poor (PO).
1 year
The color stability of the examined veneers
기간: 1 year
All Veneers were assessed clinically at 1 week (baseline) and subsequently at 3, 6, 9, and 12 months using the vita easy shade spectrophotometer. The CIEDE2000 formula will be used to measure the color change.
1 year
Wear resistance of the examined veneers
기간: 1 year
All Veneers were scanned clinically using an intra oral scanner at 1 week (baseline) and subsequently at 3, 6, and 12 months. The different scans were compared to baseline scan to assess the volume loss and accordingly the wear resistant.
1 year

공동 작업자 및 조사자

여기에서 이 연구와 관련된 사람과 조직을 찾을 수 있습니다.

스폰서

youssef alaa

연구 기록 날짜

이 날짜는 ClinicalTrials.gov에 대한 연구 기록 및 요약 결과 제출의 진행 상황을 추적합니다. 연구 기록 및 보고된 결과는 공개 웹사이트에 게시되기 전에 특정 품질 관리 기준을 충족하는지 확인하기 위해 국립 의학 도서관(NLM)에서 검토합니다.

연구 주요 날짜

연구 시작 (실제)

2025년 5월 1일

기본 완료 (실제)

2026년 8월 5일

연구 완료 (실제)

2026년 8월 5일

연구 등록 날짜

최초 제출

2026년 8월 5일

QC 기준을 충족하는 최초 제출

2026년 8월 5일

처음 게시됨 (실제)

2026년 8월 10일

연구 기록 업데이트

마지막 업데이트 게시됨 (실제)

2026년 8월 12일

QC 기준을 충족하는 마지막 업데이트 제출

2026년 8월 10일

마지막으로 확인됨

2026년 8월 1일

추가 정보

이 연구와 관련된 용어

키워드

기타 연구 ID 번호

  • 9262109

약물 및 장치 정보, 연구 문서

미국 FDA 규제 의약품 연구

아니

미국 FDA 규제 기기 제품 연구

아니

이 정보는 변경 없이 clinicaltrials.gov 웹사이트에서 직접 가져온 것입니다. 귀하의 연구 세부 정보를 변경, 제거 또는 업데이트하도록 요청하는 경우 register@clinicaltrials.gov. 문의하십시오. 변경 사항이 clinicaltrials.gov에 구현되는 즉시 저희 웹사이트에도 자동으로 업데이트됩니다. .

구독하다