Diese Seite wurde automatisch übersetzt und die Genauigkeit der Übersetzung wird nicht garantiert. Bitte wende dich an die englische Version für einen Quelltext.

Evaluation of Composite Veneers Fabricated by 3D Printing and Milling Technologies

10. August 2026 aktualisiert von: youssef alaa

Evaluation of Composite Veneers Fabricated by 3D Printing and Milling Technologies (Randomized Controlled Clinical Trial & In-Vitro Study)

The clinical study aimed to evaluate the clinical performance, color stability, and wear of indirect composite veneers produced using 3D printing and milling technologies.

Studienübersicht

Status

Abgeschlossen

Bedingungen

Intervention / Behandlung

Detaillierte Beschreibung

A total of fifty-six anterior indirect veneers will be fabricated using 3D printing and milling technologies. The veneers will be divided into two groups according to the technique of fabrication. Group I: 28 veneers will be done using 3D printing technology (VarseoSmile TriniQ, Bego), and group II: 28 veneers will be done using milling technology (Cerasmart 270, GC). Veneer restorations will be fabricated checked, and cemented, then will be evaluated using the modified FDI criteria at baseline, three months, six months, and one year. Moreover, color stability and surface wear of the restorations will be evaluated in each follow-up session.

Studientyp

Interventionell

Einschreibung (Tatsächlich)

14

Phase

  • Unzutreffend

Kontakte und Standorte

Dieser Abschnitt enthält die Kontaktdaten derjenigen, die die Studie durchführen, und Informationen darüber, wo diese Studie durchgeführt wird.

Studienorte

  • Ägypten
      • Alexandria, Ägypten
        • Faculty of dentistry, Alexandria university

Teilnahmekriterien

Forscher suchen nach Personen, die einer bestimmten Beschreibung entsprechen, die als Auswahlkriterien bezeichnet werden. Einige Beispiele für diese Kriterien sind der allgemeine Gesundheitszustand einer Person oder frühere Behandlungen.

Zulassungskriterien

Studienberechtigtes Alter

  • Erwachsene

Akzeptiert gesunde Freiwillige

Nein

Beschreibung

Inclusion Criteria:

  • Healthy adult patients aged 18 to 45 years.
  • Patients requiring veneer restorations due to discoloration, misalignment, tooth malformation or having irregular tooth shape that can be treated without full coverage.
  • Patients meeting the criteria for Class I or Class II veneers according to the LeSage veneer classification system.
  • Patients requiring veneers restorations on their bilateral maxillary anterior teeth.
  • The selected teeth should be vital with absence of clinical signs and symptoms of periapical pathology.
  • Patients having a normal occlusal relationship between upper and lower teeth (class I Angle classification).
  • Patients capable of tolerating rubber dam applications.
  • Patients willing to attend regular follow-up appointments.

Exclusion Criteria:

  • Bad oral hygiene (Oral Hygiene Index Simplified >3).
  • Non-vital teeth or endodontically treated teeth.
  • Severe periodontal disease.
  • Patients with para-functional habits (e.g., bruxism, attrition, wear facets).
  • Dentin exposure more than 20% of the prepared surface for veneer.
  • Prescence of smoking/vaping habits

Studienplan

Dieser Abschnitt enthält Einzelheiten zum Studienplan, einschließlich des Studiendesigns und der Messung der Studieninhalte.

Wie ist die Studie aufgebaut?

Designdetails

  • Hauptzweck: Behandlung
  • Zuteilung: Zufällig
  • Interventionsmodell: Parallele Zuordnung
  • Maskierung: Doppelt

Waffen und Interventionen

Teilnehmergruppe / Arm
Intervention / Behandlung
Aktiver Komparator: Group I: 28 veneers will be done using 3D printing technology (VarseoSmile TriniQ, Bego)
Sonstiges: Group I (n=28): were restored with VarseoSmile TriniQ, Bego
A total of fifty-six anterior indirect veneers will be fabricated using 3D printing and milling technologies. The veneers will be divided into two groups according to the technique of fabrication. Group I: 28 veneers will be done using 3D printing technology (VarseoSmile TriniQ, Bego), and group II: 28 veneers will be done using milling technology (Cerasmart 270, GC). Veneer restorations will be fabricated checked, and cemented, then will be evaluated using the modified FDI criteria at baseline, three months, six months, and one year. Moreover, color stability and surface wear of the restorations will be evaluated in each follow-up session.
Aktiver Komparator: group II: 28 veneers will be done using milling technology (Cerasmart 270, GC)
Sonstiges: Group II (n=28): were restored with Cerasmart 270, GC
A total of fifty-six anterior indirect veneers will be fabricated using 3D printing and milling technologies. The veneers will be divided into two groups according to the technique of fabrication. Group I: 28 veneers will be done using 3D printing technology (VarseoSmile TriniQ, Bego), and group II: 28 veneers will be done using milling technology (Cerasmart 270, GC). Veneer restorations will be fabricated checked, and cemented, then will be evaluated using the modified FDI criteria at baseline, three months, six months, and one year. Moreover, color stability and surface wear of the restorations will be evaluated in each follow-up session.

Was misst die Studie?

Primäre Ergebnismessungen

Ergebnis Maßnahme
Maßnahmenbeschreibung
Zeitfenster
The functional properties of the examined veneer restorations
Zeitfenster: 1 year
All veneers were assessed clinically at 1 week (baseline) and subsequently at 3, 6, and 12 months, following the FDI evaluation criteria and scoring system, which indicates: Functional properties: (F1) Fracture of material and retention. (F2) Marginal adaptation. (F3) Proximal contact point. (F4) Form and contour. (F5) Occlusion and wear. Each evaluated property was scored according to the FDI criteria using the following clinical scores: Score 1: Clinically excellent/very good (VG), Score 2: Clinically good (CG), score 3: Clinically satisfactory (CS), score 4: Clinically unsatisfactory (CU), score 5: Clinically poor (PO).
1 year
The biological properties of the examined veneer restorations
Zeitfenster: 1 year
All Veneers were assessed clinically at 1 week (baseline) and subsequently at 3, 6, and 12 months, following the revised FDI evaluation criteria and scoring system, which indicates: Biological properties (B1) Caries at restoration margins. (B2) Dental hard tissue defects at the restoration margin. (B3) Postoperative hypersensitivity and pulpal status. Each evaluated property was scored according to the FDI criteria using the following clinical scores: Score 1: Clinically excellent/very good (VG), Score 2: Clinically good (CG), Score 3: Clinically satisfactory (CS), Score 4: Clinically unsatisfactory (CU), Score 5: Clinically poor (PO).
1 year
The aesthetic properties of the examined veneers
Zeitfenster: 1 year
All veneers were assessed clinically at 1 week (baseline) and subsequently at 3, 6, and 12 months, following the FDI evaluation criteria and scoring system, which indicates: Aesthetic properties: (A1) Surface luster and surface texture. (A2) Marginal staining. (A3) Color match. Each evaluated property was scored according to the FDI criteria using the following clinical scores: Score 1: Clinically excellent/very good (VG), Score 2: Clinically good (CG), Score 3: Clinically satisfactory (CS), Score 4: Clinically unsatisfactory (CU), Score 5: Clinically poor (PO).
1 year
The color stability of the examined veneers
Zeitfenster: 1 year
All Veneers were assessed clinically at 1 week (baseline) and subsequently at 3, 6, 9, and 12 months using the vita easy shade spectrophotometer. The CIEDE2000 formula will be used to measure the color change.
1 year
Wear resistance of the examined veneers
Zeitfenster: 1 year
All Veneers were scanned clinically using an intra oral scanner at 1 week (baseline) and subsequently at 3, 6, and 12 months. The different scans were compared to baseline scan to assess the volume loss and accordingly the wear resistant.
1 year

Mitarbeiter und Ermittler

Hier finden Sie Personen und Organisationen, die an dieser Studie beteiligt sind.

Sponsor

youssef alaa

Studienaufzeichnungsdaten

Diese Daten verfolgen den Fortschritt der Übermittlung von Studienaufzeichnungen und zusammenfassenden Ergebnissen an ClinicalTrials.gov. Studienaufzeichnungen und gemeldete Ergebnisse werden von der National Library of Medicine (NLM) überprüft, um sicherzustellen, dass sie bestimmten Qualitätskontrollstandards entsprechen, bevor sie auf der öffentlichen Website veröffentlicht werden.

Haupttermine studieren

Studienbeginn (Tatsächlich)

1. Mai 2025

Primärer Abschluss (Tatsächlich)

5. August 2026

Studienabschluss (Tatsächlich)

5. August 2026

Studienanmeldedaten

Zuerst eingereicht

5. August 2026

Zuerst eingereicht, das die QC-Kriterien erfüllt hat

5. August 2026

Zuerst gepostet (Tatsächlich)

10. August 2026

Studienaufzeichnungsaktualisierungen

Letztes Update gepostet (Tatsächlich)

12. August 2026

Letztes eingereichtes Update, das die QC-Kriterien erfüllt

10. August 2026

Zuletzt verifiziert

1. August 2026

Mehr Informationen

Begriffe im Zusammenhang mit dieser Studie

Schlüsselwörter

Andere Studien-ID-Nummern

  • 9262109

Arzneimittel- und Geräteinformationen, Studienunterlagen

Studiert ein von der US-amerikanischen FDA reguliertes Arzneimittelprodukt

Nein

Studiert ein von der US-amerikanischen FDA reguliertes Geräteprodukt

Nein

Diese Informationen wurden ohne Änderungen direkt von der Website clinicaltrials.gov abgerufen. Wenn Sie Ihre Studiendaten ändern, entfernen oder aktualisieren möchten, wenden Sie sich bitte an register@clinicaltrials.gov. Sobald eine Änderung auf clinicaltrials.gov implementiert wird, wird diese automatisch auch auf unserer Website aktualisiert .

Abonnieren