Deze pagina is automatisch vertaald en de nauwkeurigheid van de vertaling kan niet worden gegarandeerd. Raadpleeg de Engelse versie voor een brontekst.

Evaluation of Composite Veneers Fabricated by 3D Printing and Milling Technologies

10 augustus 2026 bijgewerkt door: youssef alaa

Evaluation of Composite Veneers Fabricated by 3D Printing and Milling Technologies (Randomized Controlled Clinical Trial & In-Vitro Study)

The clinical study aimed to evaluate the clinical performance, color stability, and wear of indirect composite veneers produced using 3D printing and milling technologies.

Studie Overzicht

Toestand

Voltooid

Conditie

Interventie / Behandeling

Gedetailleerde beschrijving

A total of fifty-six anterior indirect veneers will be fabricated using 3D printing and milling technologies. The veneers will be divided into two groups according to the technique of fabrication. Group I: 28 veneers will be done using 3D printing technology (VarseoSmile TriniQ, Bego), and group II: 28 veneers will be done using milling technology (Cerasmart 270, GC). Veneer restorations will be fabricated checked, and cemented, then will be evaluated using the modified FDI criteria at baseline, three months, six months, and one year. Moreover, color stability and surface wear of the restorations will be evaluated in each follow-up session.

Studietype

Ingrijpend

Inschrijving (Werkelijk)

14

Fase

  • Niet toepasbaar

Contacten en locaties

In dit gedeelte vindt u de contactgegevens van degenen die het onderzoek uitvoeren en informatie over waar dit onderzoek wordt uitgevoerd.

Studie Locaties

  • Egypte
      • Alexandria, Egypte
        • Faculty of dentistry, Alexandria university

Deelname Criteria

Onderzoekers zoeken naar mensen die aan een bepaalde beschrijving voldoen, de zogenaamde geschiktheidscriteria. Enkele voorbeelden van deze criteria zijn iemands algemene gezondheidstoestand of eerdere behandelingen.

Geschiktheidscriteria

Leeftijden die in aanmerking komen voor studie

  • Volwassen

Accepteert gezonde vrijwilligers

Nee

Beschrijving

Inclusion Criteria:

  • Healthy adult patients aged 18 to 45 years.
  • Patients requiring veneer restorations due to discoloration, misalignment, tooth malformation or having irregular tooth shape that can be treated without full coverage.
  • Patients meeting the criteria for Class I or Class II veneers according to the LeSage veneer classification system.
  • Patients requiring veneers restorations on their bilateral maxillary anterior teeth.
  • The selected teeth should be vital with absence of clinical signs and symptoms of periapical pathology.
  • Patients having a normal occlusal relationship between upper and lower teeth (class I Angle classification).
  • Patients capable of tolerating rubber dam applications.
  • Patients willing to attend regular follow-up appointments.

Exclusion Criteria:

  • Bad oral hygiene (Oral Hygiene Index Simplified >3).
  • Non-vital teeth or endodontically treated teeth.
  • Severe periodontal disease.
  • Patients with para-functional habits (e.g., bruxism, attrition, wear facets).
  • Dentin exposure more than 20% of the prepared surface for veneer.
  • Prescence of smoking/vaping habits

Studie plan

Dit gedeelte bevat details van het studieplan, inclusief hoe de studie is opgezet en wat de studie meet.

Hoe is de studie opgezet?

Ontwerpdetails

  • Primair doel: Behandeling
  • Toewijzing: Gerandomiseerd
  • Interventioneel model: Parallelle opdracht
  • Masker: Dubbele

Wapens en interventies

Deelnemersgroep / Arm
Interventie / Behandeling
Actieve vergelijker: Group I: 28 veneers will be done using 3D printing technology (VarseoSmile TriniQ, Bego)
Ander: Group I (n=28): were restored with VarseoSmile TriniQ, Bego
A total of fifty-six anterior indirect veneers will be fabricated using 3D printing and milling technologies. The veneers will be divided into two groups according to the technique of fabrication. Group I: 28 veneers will be done using 3D printing technology (VarseoSmile TriniQ, Bego), and group II: 28 veneers will be done using milling technology (Cerasmart 270, GC). Veneer restorations will be fabricated checked, and cemented, then will be evaluated using the modified FDI criteria at baseline, three months, six months, and one year. Moreover, color stability and surface wear of the restorations will be evaluated in each follow-up session.
Actieve vergelijker: group II: 28 veneers will be done using milling technology (Cerasmart 270, GC)
Ander: Group II (n=28): were restored with Cerasmart 270, GC
A total of fifty-six anterior indirect veneers will be fabricated using 3D printing and milling technologies. The veneers will be divided into two groups according to the technique of fabrication. Group I: 28 veneers will be done using 3D printing technology (VarseoSmile TriniQ, Bego), and group II: 28 veneers will be done using milling technology (Cerasmart 270, GC). Veneer restorations will be fabricated checked, and cemented, then will be evaluated using the modified FDI criteria at baseline, three months, six months, and one year. Moreover, color stability and surface wear of the restorations will be evaluated in each follow-up session.

Wat meet het onderzoek?

Primaire uitkomstmaten

Uitkomstmaat
Maatregel Beschrijving
Tijdsspanne
The functional properties of the examined veneer restorations
Tijdsspanne: 1 year
All veneers were assessed clinically at 1 week (baseline) and subsequently at 3, 6, and 12 months, following the FDI evaluation criteria and scoring system, which indicates: Functional properties: (F1) Fracture of material and retention. (F2) Marginal adaptation. (F3) Proximal contact point. (F4) Form and contour. (F5) Occlusion and wear. Each evaluated property was scored according to the FDI criteria using the following clinical scores: Score 1: Clinically excellent/very good (VG), Score 2: Clinically good (CG), score 3: Clinically satisfactory (CS), score 4: Clinically unsatisfactory (CU), score 5: Clinically poor (PO).
1 year
The biological properties of the examined veneer restorations
Tijdsspanne: 1 year
All Veneers were assessed clinically at 1 week (baseline) and subsequently at 3, 6, and 12 months, following the revised FDI evaluation criteria and scoring system, which indicates: Biological properties (B1) Caries at restoration margins. (B2) Dental hard tissue defects at the restoration margin. (B3) Postoperative hypersensitivity and pulpal status. Each evaluated property was scored according to the FDI criteria using the following clinical scores: Score 1: Clinically excellent/very good (VG), Score 2: Clinically good (CG), Score 3: Clinically satisfactory (CS), Score 4: Clinically unsatisfactory (CU), Score 5: Clinically poor (PO).
1 year
The aesthetic properties of the examined veneers
Tijdsspanne: 1 year
All veneers were assessed clinically at 1 week (baseline) and subsequently at 3, 6, and 12 months, following the FDI evaluation criteria and scoring system, which indicates: Aesthetic properties: (A1) Surface luster and surface texture. (A2) Marginal staining. (A3) Color match. Each evaluated property was scored according to the FDI criteria using the following clinical scores: Score 1: Clinically excellent/very good (VG), Score 2: Clinically good (CG), Score 3: Clinically satisfactory (CS), Score 4: Clinically unsatisfactory (CU), Score 5: Clinically poor (PO).
1 year
The color stability of the examined veneers
Tijdsspanne: 1 year
All Veneers were assessed clinically at 1 week (baseline) and subsequently at 3, 6, 9, and 12 months using the vita easy shade spectrophotometer. The CIEDE2000 formula will be used to measure the color change.
1 year
Wear resistance of the examined veneers
Tijdsspanne: 1 year
All Veneers were scanned clinically using an intra oral scanner at 1 week (baseline) and subsequently at 3, 6, and 12 months. The different scans were compared to baseline scan to assess the volume loss and accordingly the wear resistant.
1 year

Medewerkers en onderzoekers

Hier vindt u mensen en organisaties die betrokken zijn bij dit onderzoek.

Sponsor

youssef alaa

Studie record data

Deze datums volgen de voortgang van het onderzoeksdossier en de samenvatting van de ingediende resultaten bij ClinicalTrials.gov. Studieverslagen en gerapporteerde resultaten worden beoordeeld door de National Library of Medicine (NLM) om er zeker van te zijn dat ze voldoen aan specifieke kwaliteitscontrolenormen voordat ze op de openbare website worden geplaatst.

Bestudeer belangrijke data

Studie start (Werkelijk)

1 mei 2025

Primaire voltooiing (Werkelijk)

5 augustus 2026

Studie voltooiing (Werkelijk)

5 augustus 2026

Studieregistratiedata

Eerst ingediend

5 augustus 2026

Eerst ingediend dat voldeed aan de QC-criteria

5 augustus 2026

Eerst geplaatst (Werkelijk)

10 augustus 2026

Updates van studierecords

Laatste update geplaatst (Werkelijk)

12 augustus 2026

Laatste update ingediend die voldeed aan QC-criteria

10 augustus 2026

Laatst geverifieerd

1 augustus 2026

Meer informatie

Termen gerelateerd aan deze studie

Trefwoorden

Andere studie-ID-nummers

  • 9262109

Informatie over medicijnen en apparaten, studiedocumenten

Bestudeert een door de Amerikaanse FDA gereguleerd geneesmiddel

Nee

Bestudeert een door de Amerikaanse FDA gereguleerd apparaatproduct

Nee

Deze informatie is zonder wijzigingen rechtstreeks van de website clinicaltrials.gov gehaald. Als u verzoeken heeft om uw onderzoeksgegevens te wijzigen, te verwijderen of bij te werken, neem dan contact op met register@clinicaltrials.gov. Zodra er een wijziging wordt doorgevoerd op clinicaltrials.gov, wordt deze ook automatisch bijgewerkt op onze website .

Abonneren