Insole Sensor to Determine Optimal Limb Loading
Development and Clinical Trial of an Insole Sensor to Determine Optimal Limb Loading in the Rehabilitation of OTA Type 42IIIB and IIIC Lower Extremity Fractures
The purpose of this study is to use a novel load monitoring technology to correlate limb loading to OTA type 42IIIB and IIIC tibial fracture outcomes. This study will be the first to collect continuous limb loading data and will provide the first objective insight into how limb loading directs fracture healing. To meet this purpose, two specific aims have been developed.
Specific Aim 1: Preclinical validation of a load-monitoring insole
The Hitchcock laboratory has overcome the greatest technical hurdle for continuous limb load monitoring: development of load sensor technology that is affordable, accurate and capable of monitoring for over four weeks. To develop this sensor technology into a load-monitoring insole, the Hitchcock lab will incorporate consumer type electronics into the design, including a microprocessor, battery, and data storage media.
Following construction of a functional load-monitoring insole, a pilot human study with orthopaedic trauma patients from the University of Utah (N=20) will be conducted to identify modes of device failure, improve device interfacing and develop data handling protocols and software for the clinical arm of the proposed study.
Specific Aim 2: Conduct a prospective, direct observational cohort study.
Thirty (30) open tibial fracture patients will be recruited at two centers: University of Utah (N=15) and William Beaumont Army Medical Center (N=15). Participants will wear a walking boot instrumented with the load-monitoring insole that will continuously record limb loading and serve as a step counter. X-rays collected at standard-of-care follow-up visits will be used by Drs. Kubiak and Orr to subjectively evaluate fracture healing. A questionnaire regarding subjective perception of patient compliance will be collected at the first and last follow-up visits. Data collected from the insole sensor will be correlated to objective measures of fracture healing and subjective measures of patient compliance to determine the effect of patient limb loading on injury outcome. The Hitchcock laboratory will develop software to process and summarize data from the load monitoring insole and continually improve human interfacing factors of the load monitoring insole based off of feedback from the clinical team and study participants.
Przegląd badań
Status
Warunki
Typ studiów
Zapisy (Rzeczywisty)
Kontakty i lokalizacje
Lokalizacje studiów
-
-
Utah
-
Salt Lake City, Utah, Stany Zjednoczone, 84108
- University of Utah
-
-
Kryteria uczestnictwa
Kryteria kwalifikacji
Wiek uprawniający do nauki
Akceptuje zdrowych ochotników
Płeć kwalifikująca się do nauki
Metoda próbkowania
Badana populacja
Opis
Inclusion Criteria:
Specific Aim 1 Inclusion Criteria
- Patient is 18 years of age or older
- Patient has below the knee fracture
- Patient speaks English
- Patient weighs between 100 and 250 pounds
- Patient lives in close enough proximity to the the hospital to return for all appointments (~100 miles)
Specific Aim 2 Inclusion Criteria
- Patient is 18 years of age or older
- Patient has a tibia fracture
- Patient speaks English
- Patient weighs between 100 and 250 pounds
- Patient lives in close enough proximity to the the hospital to return for all appointments (~100 miles)
Exclusion Criteria:
Specific Aim 1 Exclusion Criteria
- Patient is younger than 18 years of age
- Patient does not have a below the knee fracture
- Patient does not speak English
- Patient weighs less than 100 pounds or more than 250 pounds
- Patient does not live in close enough proximity to the hospital to return for all appointments (~100 miles)
- Patient has another fracture that will alter his/her weight bearing status
Specific Aim 2 Exclusion Criteria
- Patient is younger than 18 years of age
- Patient does not have a tibia fracture
- Patient does not speak English
- Patient weighs less than 100 pounds or more than 250 pounds
- Patient does not live in close enough proximity to the hospital to return for all appointments (~100 miles)
- Patient has another fracture that will alter his/her weight bearing status
Plan studiów
Jak projektuje się badanie?
Szczegóły projektu
- Modele obserwacyjne: Kohorta
- Perspektywy czasowe: Spodziewany
Co mierzy badanie?
Podstawowe miary wyniku
Miara wyniku |
Opis środka |
Ramy czasowe |
|---|---|---|
|
Patient Activity Measure (PAM-13) Questionnaire
Ramy czasowe: Follow Up Visits up to 1-Year
|
A subjective evaluation of perceived compliance with physician instruction
|
Follow Up Visits up to 1-Year
|
Miary wyników drugorzędnych
Miara wyniku |
Opis środka |
Ramy czasowe |
|---|---|---|
|
X-ray (AP and Lateral)
Ramy czasowe: Follow Up Visits up to 1 Year
|
Subjectively evaluate fracture healing
|
Follow Up Visits up to 1 Year
|
Współpracownicy i badacze
Sponsor
Współpracownicy
Śledczy
- Główny śledczy: David Rothberg, MD, Orthopedic Surgery
Daty zapisu na studia
Główne daty studiów
Rozpoczęcie studiów
Zakończenie podstawowe (Rzeczywisty)
Ukończenie studiów (Rzeczywisty)
Daty rejestracji na studia
Pierwszy przesłany
Pierwszy przesłany, który spełnia kryteria kontroli jakości
Pierwszy wysłany (Oszacować)
Aktualizacje rekordów badań
Ostatnia wysłana aktualizacja (Rzeczywisty)
Ostatnia przesłana aktualizacja, która spełniała kryteria kontroli jakości
Ostatnia weryfikacja
Więcej informacji
Terminy związane z tym badaniem
Słowa kluczowe
Dodatkowe istotne warunki MeSH
Inne numery identyfikacyjne badania
- 58956
Te informacje zostały pobrane bezpośrednio ze strony internetowej clinicaltrials.gov bez żadnych zmian. Jeśli chcesz zmienić, usunąć lub zaktualizować dane swojego badania, skontaktuj się z register@clinicaltrials.gov. Gdy tylko zmiana zostanie wprowadzona na stronie clinicaltrials.gov, zostanie ona automatycznie zaktualizowana również na naszej stronie internetowej .