Clinical Performance of Direct-Printed Versus Thermoformed Aligners
Clinical Performance of In-Office Directly Printed Versus Thermoformed Aligners: A Randomized Clinical Trial
The goal of this study is to evaluate and compare the clinical effectiveness of in-office directly 3D-printed clear aligners versus conventional multilayered thermoformed aligners.
The main question it aims to answer is:
Does the use of in-office direct-printed shape-memory aligners result in superior clinical effectiveness, compared to established multilayer thermoformed aligner systems?
Researchers will compare a Direct-Printed Aligner (DPA) group using Senertek Clear-A V2 resin to a Thermoformed Aligner (TFA) group using Zendura FLX multilayer sheets to see if the additive manufacturing process improves clinical outcomes and patient satisfaction.
Participants will:
- Undergo initial records including intraoral digital scans, photos, and a panoramic radiograph for treatment planning.
- Wear their assigned clear aligners (either direct-printed or thermoformed) for at least 22 hours per day, changing them every 7 days.
- Attend follow-up appointments every 5 weeks.
Visão geral do estudo
Status
Intervenção / Tratamento
Descrição detalhada
This is a prospective, parallel-arm randomized controlled multi-center clinical trial, to assess and compare the clinical effectiveness of in-office 3D-printed clear aligners with multilayered thermoformed aligners.
The subject population for this study will be male and female subjects aged 16-30 years who have fully erupted permanent dentition and mild dental crowding or spacing.
Methodology:
Patients requiring orthodontic treatment are randomly allocated into two groups.
Experimental Group (DPA): Aligners are fabricated using additive manufacturing (direct 3D printing) with Senertek Clear-A V2 shape-memory resin. This process eliminates the intermediate physical model, potentially reducing cumulative manufacturing errors.
Control Group (TFA): Aligners are fabricated by thermoforming multilayered thermoplastic sheets (Zendura FLX) over 3D-printed resin molds.
Assessment:
Digital models (STL files) will be obtained at the start (T0) and at the end of the treatment (T1). These will be compared to the digital treatment plan (Tp) using 3D superimposition and trigonometric analysis. Stable anatomical structures, such as the palatal rugae, will serve as reference points for superimposition. The primary outcome is the "Tracking Accuracy Percentage," which measures how closely the actual clinical tooth movement matches the digitally predicted movement. Secondary outcomes include clinical efficiency, patient-reported pain levels, and Manufacturing complexity, including total fabrication time.
Tipo de estudo
Inscrição (Estimado)
Estágio
- Não aplicável
Contactos e Locais
Contato de estudo
- Nome: Ali Rahman Issa, PhD student
- Número de telefone: 009647801218939
- E-mail: ali.hassan1902@codental.uobaghdad.edu.iq
Locais de estudo
-
-
-
Baghdad, Iraque, 10013
- Recrutamento
- Z Orchida Clinic
-
Contato:
- Ali Rahman isaa
- Número de telefone: 009647801218939
- E-mail: ali.abdolrahman@gmail.com
-
Baghdad, Iraque, 10047
- Recrutamento
- Orthodontic department, College of dentistry, university of Baghdad.
-
Contato:
- Ali Rahman Issa, PhD. student
- Número de telefone: 009647801218939
- E-mail: ali.hassan1902@codental.uobaghdad.edu.iq
-
-
Bab Al-Muadham
-
Baghdad, Bab Al-Muadham, Iraque, 10047
- Recrutamento
- Specialized Dental Center for Prosthodontics and Orthodontics
-
Contato:
- Ali Rahman Issa
- Número de telefone: 009647801218939
- E-mail: ali.hassan1902@codental.uobaghdad.edu.iq
-
-
Critérios de participação
Critérios de elegibilidade
Idades elegíveis para estudo
- Filho
- Adulto
Aceita Voluntários Saudáveis
Descrição
Inclusion Criteria:
- Adult patient with an age range of 15-30 with fully erupted all permanent dentitions excluding third molars, and a willingness to participate in the trial.
- Angle Class I non-extraction cases, presented with mild crowding or spacing (<5 mm) and dental rotation <30° .
- Good oral hygiene; no active caries/periodontal disease, no history of trauma or root resorption.
Exclusion Criteria:
- Pregnancy, smoking, and systemic conditions affecting bone remodeling.
- Subject with poor oral hygiene, using simplified oral hygiene index (OHI-S ≥ 3.1 ) (Greene & Vermillion, 1963).
- Patient with malposed lower second molars (need orthodontic alignment).
- Allergy to materials used (resins, plastics, solvents).
- History of trauma, root resorption, and dilacerated roots.
- Previous extraction or history of previous orthodontic treatment.
Plano de estudo
Como o estudo é projetado?
Detalhes do projeto
- Finalidade Principal: Tratamento
- Alocação: Randomizado
- Modelo Intervencional: Atribuição Paralela
- Mascaramento: Dobro
Armas e Intervenções
Grupo de Participantes / Braço |
Intervenção / Tratamento |
|---|---|
|
Experimental: Direct-Printed Aligner
Participants in this group will receive clear aligners manufactured using in-office 3D printing technology.
This arm tests the effectiveness of additive manufacturing and the shape-memory properties of the resin in achieving programmed tooth movements.
|
Participants in this group will receive clear aligner therapy fabricated via direct-printing, utilizing a specialized light-curable resin (Clear-A V2, Senertek, İzmir, Turkey).
|
|
Comparador Ativo: Thermoformed Aligner
Participants in this group will receive conventional clear aligners manufactured using the vacuum-forming (thermoforming) process.
This arm serves as the gold standard to which the experimental 3D-printed aligners are compared.
|
Participants in this group will treated with clear aligners fabricated via the conventional indirect method, involving the thermoforming of thermoplastic sheets (Zendura FLX, Zendura dental, Fremont, California) over 3D-printed dental molds.
|
O que o estudo está medindo?
Medidas de resultados primários
Medida de resultado |
Descrição da medida |
Prazo |
|---|---|---|
|
Angular tooth movement tracking accuracy
Prazo: The expected duration of subject participation from enrollment to the end of treatment is 6-12 months.
|
Digital models (Initial (T0), planned (Tp), and final (T1)) will be compared using trigonometry.
Angular measurements of vestibulo-lingual tipping, mesio-distal tipping, and rotation, will be performed on the three digital casts that had been previously superimposed.
|
The expected duration of subject participation from enrollment to the end of treatment is 6-12 months.
|
|
Linear tooth movement tracking accuracy
Prazo: The expected duration of subject participation from enrollment to the end of treatment is 6-12 months.
|
Evaluation of the tracking accuracy of linear tooth movements (in millimeters) by superimposing three-dimensional digital dental models across three therapeutic stages: Initial (T0), Planned (Tp), and Final (T1).
Trigonometric spatial analysis will be executed on the superimposed digital casts to quantify the absolute positional discrepancy between the virtually planned tooth position and the actual clinically achieved position.
|
The expected duration of subject participation from enrollment to the end of treatment is 6-12 months.
|
Medidas de resultados secundários
Medida de resultado |
Descrição da medida |
Prazo |
|---|---|---|
|
Clinical efficiency
Prazo: The expected duration of subject participation from enrollment to the end of treatment is 6-12 months.
|
The additional treatment time necessitated by refinements will be calculated and compared statistically between the study groups.
|
The expected duration of subject participation from enrollment to the end of treatment is 6-12 months.
|
|
Evaluate degree of conversion
Prazo: The expected duration of subject participation from enrollment to the end of treatment is 6-12 months.
|
The relative concentration of unreacted aliphatic carbon double bonds will be evaluated by measuring the peak areas of the aliphatic C=C stretching vibrations (at 1634 cm -1 and 1620 cm-1) and the stable internal standard (N-H bending absorption at 1523 cm-1) via the tangent baseline technique.
These distinct spectral values will be mathematically aggregated using the standard normalized ratio equation: DC (%)=[1-(R cured/R monomer)]×100.
Unit of Measure, percentage (%) of converted double bonds.
|
The expected duration of subject participation from enrollment to the end of treatment is 6-12 months.
|
|
Shape memory property
Prazo: 3 months
|
The percentage of shape recovery over time and the total deformation angles exhibited by both the direct-printed resin (Senertek Clear-A V2) and the thermoformed aligner sheets.Quantitative measurements will be recorded using a standardized thermo-mechanical bending test layout under controlled temperature intervals.
|
3 months
|
|
Color stability assessment
Prazo: The expected duration of subject participation from enrollment to the end of treatment is 6-12 months.
|
Optical transmittance will be measured across the visible light spectrum to evaluate and compare the transparency degradation and color stability of direct-printed versus thermoformed aligners before and after in vivo aging.
|
The expected duration of subject participation from enrollment to the end of treatment is 6-12 months.
|
|
Manufacturing complexity and fabrication time
Prazo: The expected duration of subject participation from enrollment to the end of treatment is 6-12 months.
|
For each workflow, the total production time, hands-on labor, and material expenses will be recorded and analyzed.
|
The expected duration of subject participation from enrollment to the end of treatment is 6-12 months.
|
|
Patient-Reported Treatment Discomfort
Prazo: The expected duration of subject participation from enrollment to the end of treatment is 6-12 months.
|
Patient-reported pain or discomfort evaluated on a standard horizontal Visual Analogue Scale (VAS) ranging from 0 (no pain) to 100 (severe pain).
Unit of Measure, millimeters (mm) on a 100 mm scale.
|
The expected duration of subject participation from enrollment to the end of treatment is 6-12 months.
|
Colaboradores e Investigadores
Patrocinador
Investigadores
- Diretor de estudo: Noor Muhammed Garma, Assistant Professor, University of Baghdad, College of Dentistry, Department of Orthodontic.
Datas de registro do estudo
Datas Principais do Estudo
Início do estudo (Estimado)
Conclusão Primária (Estimado)
Conclusão do estudo (Estimado)
Datas de inscrição no estudo
Enviado pela primeira vez
Enviado pela primeira vez que atendeu aos critérios de CQ
Primeira postagem (Real)
Atualizações de registro de estudo
Última Atualização Postada (Real)
Última atualização enviada que atendeu aos critérios de controle de qualidade
Última verificação
Mais Informações
Termos relacionados a este estudo
Palavras-chave
Termos MeSH relevantes adicionais
Outros números de identificação do estudo
- 1197426
Plano para dados de participantes individuais (IPD)
Planeja compartilhar dados de participantes individuais (IPD)?
Informações sobre medicamentos e dispositivos, documentos de estudo
Estuda um medicamento regulamentado pela FDA dos EUA
Estuda um produto de dispositivo regulamentado pela FDA dos EUA
produto fabricado e exportado dos EUA
Essas informações foram obtidas diretamente do site clinicaltrials.gov sem nenhuma alteração. Se você tiver alguma solicitação para alterar, remover ou atualizar os detalhes do seu estudo, entre em contato com register@clinicaltrials.gov. Assim que uma alteração for implementada em clinicaltrials.gov, ela também será atualizada automaticamente em nosso site .