Esta página foi traduzida automaticamente e a precisão da tradução não é garantida. Por favor, consulte o versão em inglês para um texto fonte.

Patient-Reported Outcomes for Different Orthodontic Thermoplastics Used in Clear Aligners

14 de setembro de 2026 atualizado por: CMH Lahore Medical College and Institute of Dentistry

Patient-Reported Outcomes for Different Orthodontic Thermoplastics for Clear Aligners: A Randomized Controlled Clinical Trial

Clear aligner therapy is an esthetic orthodontic treatment modality that uses removable thermoplastic trays to correct dental alignment. Different thermoplastic materials, including thermoplastic polyurethane (TPU) and polyethylene terephthalate glycol (PETG), may differ in flexibility and mechanical behavior. These material differences may influence patient-reported outcomes such as pain, mucosal ulceration, tooth sensitivity, tooth mobility, and material-related allergic symptoms. This randomized, double-blind, parallel-group clinical trial will compare patient-reported outcomes in patients treated with clear aligners fabricated from TPU versus PETG. Participants requiring non-extraction clear aligner therapy for mild to moderate crowding will be randomly allocated in a 1:1 ratio to receive aligners fabricated from either PETG or TPU. Outcomes will be recorded at five predefined time points after aligner assignment and wear: T0 before aligner wear, T1 immediately after aligner insertion/wear, T2 at day 1, T3 at day 3, and T4 at day 7.

Visão geral do estudo

Descrição detalhada

This is a randomized, double-blind, parallel-group clinical trial conducted at the Department of Orthodontics, Institute of Dentistry, CMH Lahore Medical College, Lahore, Pakistan.

Eligible participants will be patients aged 15 to 30 years seeking orthodontic treatment with clear aligners. Patients must have permanent dentition from first molar to first molar, mild to moderate crowding less than 8 mm, and a non-extraction treatment plan.

After baseline assessment, participants will be randomized in a 1:1 ratio to receive clear aligners fabricated from PETG or TPU. Randomization will use a computer-generated sequence prepared by an independent statistician. Allocation concealment will be maintained using sealed envelopes by staff not involved in trial assessment.

The principal investigator will plan all aligner cases. Linear movements will be limited to 0.25 mm per aligner. Angular movements will be limited to 2 degrees per aligner, except torque, which will be limited to 1 degree per aligner. Each aligner will be worn for 10 days.

Patient-reported outcomes will be collected by an operator blinded to the aligner material. Participants will also be blinded to the aligner material. Outcomes include pain on a visual analog scale, ulceration or soft-tissue trauma, tooth sensitivity, tooth mobility, and symptoms suggestive of material-related allergy.

Tipo de estudo

Intervencional

Inscrição (Estimado)

34

Estágio

  • Não aplicável

Contactos e Locais

Esta seção fornece os detalhes de contato para aqueles que conduzem o estudo e informações sobre onde este estudo está sendo realizado.

Contato de estudo

Estude backup de contato

Locais de estudo

    • Punjab Province
      • Lahore, Punjab Province, Paquistão, 54000
        • Recrutamento
        • CMH Lahore Medical college and institue of dentistry
        • Contato:
        • Contato:

Critérios de participação

Os pesquisadores procuram pessoas que se encaixem em uma determinada descrição, chamada de critérios de elegibilidade. Alguns exemplos desses critérios são a condição geral de saúde de uma pessoa ou tratamentos anteriores.

Critérios de elegibilidade

Idades elegíveis para estudo

  • Filho
  • Adulto

Aceita Voluntários Saudáveis

Sim

Descrição

Inclusion Criteria:

  • • Patient aged between 15 and 30 years.

    • Permanent dentition, with all permanent teeth from first molar to first molar present.
    • Mild to moderate crowding less than 8 mm.
    • Non-extraction orthodontic treatment plan.
    • Ability and willingness to wear aligners for the required time.
    • Willingness to attend regular visits during orthodontic treatment.

Exclusion Criteria:

  • • Syndromic patients.

    • Known allergy to thermoplastic materials.
    • Patients with systemic diseases that may affect orthodontic treatment or outcome assessment.
    • Patients requiring extraction as part of orthodontic treatment.

Plano de estudo

Esta seção fornece detalhes do plano de estudo, incluindo como o estudo é projetado e o que o estudo está medindo.

Como o estudo é projetado?

Detalhes do projeto

  • Finalidade Principal: Tratamento
  • Alocação: Randomizado
  • Modelo Intervencional: Atribuição Paralela
  • Mascaramento: Triplo

Armas e Intervenções

Grupo de Participantes / Braço
Intervenção / Tratamento
Experimental: Experimental Arm A: PETG clear aligners
Participants will receive clear aligners fabricated from polyethylene terephthalate glycol (PETG). Aligners will be planned for routine orthodontic alignment, including proclination, expansion, or interdental enamel reduction when clinically indicated. Each aligner will be worn for 10 days.
Clear aligners fabricated from polyethylene terephthalate glycol (PETG) thermoplastic material. Aligners will be worn for 10 days before progression to the next aligner.
Outros nomes:
  • Clear aligner fabricated from PETG thermoplastic material
Clear aligners fabricated from thermoplastic polyurethane (TPU) material. Aligners will be worn for 10 days before progression to the next aligner.
Experimental: Experimental Arm B: TPU clear aligners
Participants will receive clear aligners fabricated from thermoplastic polyurethane (TPU). Aligners will be planned for routine orthodontic alignment, including proclination, expansion, or interdental enamel reduction when clinically indicated. Each aligner will be worn for 10 days.
Clear aligners fabricated from polyethylene terephthalate glycol (PETG) thermoplastic material. Aligners will be worn for 10 days before progression to the next aligner.
Outros nomes:
  • Clear aligner fabricated from PETG thermoplastic material
Clear aligners fabricated from thermoplastic polyurethane (TPU) material. Aligners will be worn for 10 days before progression to the next aligner.

O que o estudo está medindo?

Medidas de resultados primários

Medida de resultado
Descrição da medida
Prazo
Pain intensity during clear aligner therapy
Prazo: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Pain experienced by the participant will be recorded using a visual analog scale (VAS) from 0 to 10, where 0 indicates no pain and 10 indicates the worst pain.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.

Medidas de resultados secundários

Medida de resultado
Descrição da medida
Prazo
Mucosal ulceration or soft-tissue trauma related to aligner wear
Prazo: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Presence or absence of ulceration or trauma from the aligner material, recorded by patient report and/or clinical assessment.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Tooth sensitivity
Prazo: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Presence or absence of sensitivity in any specific tooth as reported by the participant.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Tooth mobility
Prazo: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Presence or absence of tooth mobility reported or detected during follow-up.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Allergic symptoms or material-related adverse reaction
Prazo: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Any symptoms suggestive of allergy or adverse reaction to the aligner material will be recorded.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.

Colaboradores e Investigadores

É aqui que você encontrará pessoas e organizações envolvidas com este estudo.

Investigadores

  • Investigador principal: HARIS KHAN, BDS,FCPS, CMH Lahore medical college and IOD

Datas de registro do estudo

Essas datas acompanham o progresso do registro do estudo e os envios de resumo dos resultados para ClinicalTrials.gov. Os registros do estudo e os resultados relatados são revisados ​​pela National Library of Medicine (NLM) para garantir que atendam aos padrões específicos de controle de qualidade antes de serem publicados no site público.

Datas Principais do Estudo

Início do estudo (Real)

10 de agosto de 2026

Conclusão Primária (Estimado)

15 de novembro de 2026

Conclusão do estudo (Estimado)

1 de dezembro de 2026

Datas de inscrição no estudo

Enviado pela primeira vez

7 de agosto de 2026

Enviado pela primeira vez que atendeu aos critérios de CQ

24 de agosto de 2026

Primeira postagem (Real)

27 de agosto de 2026

Atualizações de registro de estudo

Última Atualização Postada (Real)

16 de setembro de 2026

Última atualização enviada que atendeu aos critérios de controle de qualidade

14 de setembro de 2026

Última verificação

1 de setembro de 2026

Mais Informações

Termos relacionados a este estudo

Outros números de identificação do estudo

  • 194/ERC/CMH/LMC
  • 449/L-ORIC/CMH LMC (Número de outro subsídio/financiamento: CMH lahore medical college and institute of dentistry)

Plano para dados de participantes individuais (IPD)

Planeja compartilhar dados de participantes individuais (IPD)?

NÃO

Informações sobre medicamentos e dispositivos, documentos de estudo

Estuda um medicamento regulamentado pela FDA dos EUA

Não

Estuda um produto de dispositivo regulamentado pela FDA dos EUA

Não

Essas informações foram obtidas diretamente do site clinicaltrials.gov sem nenhuma alteração. Se você tiver alguma solicitação para alterar, remover ou atualizar os detalhes do seu estudo, entre em contato com register@clinicaltrials.gov. Assim que uma alteração for implementada em clinicaltrials.gov, ela também será atualizada automaticamente em nosso site .

Se inscrever