Tämä sivu käännettiin automaattisesti, eikä käännösten tarkkuutta voida taata. Katso englanninkielinen versio lähdetekstiä varten.

Comparison Physiological Tooth Mobility and Retention Success in Patients Using Different Retainers

sunnuntai 30. elokuuta 2026 päivittänyt: gulden karabiber, Marmara University
The purpose of this prospective clinical study is to comparatively evaluate the long-term stability of teeth, physiological tooth mobility, and effects on periodontal tissues of three different fixed lingual retainer materials used to prevent relapse following orthodontic treatment. A total of 80 participants whose orthodontic treatment is completed will be randomly and equally distributed into four groups as one control (n=20) and three study groups (n=20 each): Group 1 will receive CAD/CAM-fabricated 0.016-inch Nitinol wire; Group 2 will receive manually bent multi- strand 0.0215-inch stainless steel wire; and Group 3 will receive 0.030-inch stainless steel chain retainers. Control group will be 20 samples. Clinical and radiographic measurements will be performed at the day of debonding (T0) and at a 6-month follow-up (T1). Physiological tooth mobility will be measured objectively using a Periotest device. Relapse amounts will be assessed by superimposing intraoral digital scans via Nemocast software using Little's Irregularity Index, and the 6-month failure/breakage rates of the retainers will be recorded. The null hypothesis states that there is no statistically significant difference among the different retainer materials regarding tooth stability, relapse, and physiological mobility.

Tutkimuksen yleiskatsaus

Opintotyyppi

Havainnollistava

Ilmoittautuminen (Arvioitu)

80

Yhteystiedot ja paikat

Tässä osiossa on tutkimuksen suorittajien yhteystiedot ja tiedot siitä, missä tämä tutkimus suoritetaan.

Opiskelupaikat

Osallistumiskriteerit

Tutkijat etsivät ihmisiä, jotka sopivat tiettyyn kuvaukseen, jota kutsutaan kelpoisuuskriteereiksi. Joitakin esimerkkejä näistä kriteereistä ovat henkilön yleinen terveydentila tai aiemmat hoidot.

Kelpoisuusvaatimukset

Opintokelpoiset iät

  • Aikuinen

Hyväksyy terveitä vapaaehtoisia

Joo

Näytteenottomenetelmä

Todennäköisyysnäyte

Tutkimusväestö

Healthy volunteers whose orthodontic treatment finalized and who waited for taking off braces.

Kuvaus

Inclusion Criteria:

  1. Patients who have undergone fixed orthodontic treatment at the Department of Orthodontics, Faculty of Dentistry, Marmara University, and whose treatment is nearing completion
  2. Patients whose treatment duration is between 2 and 3 years
  3. Patients with healthy periodontal tissue (plaque index and gingival index <1; bleeding on probing <10 per cent; no clinical attachment loss)
  4. Patients aged between 18 and 35
  5. Systemically healthy individuals
  6. Patients with deep bite for whom Nitinol wire retainers, manufactured using CAD/CAM technology and capable of being fitted without occlusal contact due to their adaptability to the occlusion, have been applied
  7. Patients for whom impressions cannot be taken to fabricate a retainer
  8. Patients without deep bite or a gag reflex who have had a standard retainer fitted

Exclusion Criteria:

  1. Patients who have undergone orthodontic treatment at another clinic
  2. Patients whose treatment lasted longer than 3 years or less than 2 years
  3. Patients with a cleft lip and palate or a related syndrome
  4. Patients with caries or dental prostheses on the teeth where the retainer is to be bonded
  5. Smokers
  6. Individuals with missing anterior teeth
  7. Individuals taking systemic medication that affects the immune system or may affect periodontal health (e.g. steroids)
  8. Pregnant or breastfeeding women

Opintosuunnitelma

Tässä osiossa on tietoja tutkimussuunnitelmasta, mukaan lukien kuinka tutkimus on suunniteltu ja mitä tutkimuksella mitataan.

Miten tutkimus on suunniteltu?

Suunnittelun yksityiskohdat

Kohortit ja interventiot

Ryhmä/Kohortti
Interventio / Hoito
1. Control
healthy gingiva, no smoking, non-pregnant, age:18-35, patients did not receive any orthodontic treatment and don't have bruxism and syndrome
T0 Mobility measurement with Periotest device after orthodontic treatment finished; before retainer simantation and after simantation. T1 Mobility measurement with Periotest device 6 months later; with retainer and without retainer.
T0 digital dental models will be taken with 3D scanner after orthodontic treatment finished; after retainer simantation. T1 digital dental models will be taken 6 months later with retainer. And Little irregularity index, arch length measurement will be performed.
2. CAD-CAM Nitinol wire (Memotain)
Just finished orthodontic treatment, healthy gingiva, no smoking, non-pregnant, age:18-35, patients don't have bruxism and syndrome
T0 Mobility measurement with Periotest device after orthodontic treatment finished; before retainer simantation and after simantation. T1 Mobility measurement with Periotest device 6 months later; with retainer and without retainer.
T0 digital dental models will be taken with 3D scanner after orthodontic treatment finished; after retainer simantation. T1 digital dental models will be taken 6 months later with retainer. And Little irregularity index, arch length measurement will be performed.
3. Manually bent 6 multi- strand 0.0215-inch stainless steel wire
Just finished orthodontic treatment, healthy gingiva, no smoking, non-pregnant, age:18-35, patients don't have bruxism and syndrome
T0 Mobility measurement with Periotest device after orthodontic treatment finished; before retainer simantation and after simantation. T1 Mobility measurement with Periotest device 6 months later; with retainer and without retainer.
T0 digital dental models will be taken with 3D scanner after orthodontic treatment finished; after retainer simantation. T1 digital dental models will be taken 6 months later with retainer. And Little irregularity index, arch length measurement will be performed.
4. 0.030-inch stainless steel chain
Just finished orthodontic treatment, healthy gingiva, no smoking, non-pregnant, age:18-35, patients don't have bruxism and syndrome
T0 Mobility measurement with Periotest device after orthodontic treatment finished; before retainer simantation and after simantation. T1 Mobility measurement with Periotest device 6 months later; with retainer and without retainer.
T0 digital dental models will be taken with 3D scanner after orthodontic treatment finished; after retainer simantation. T1 digital dental models will be taken 6 months later with retainer. And Little irregularity index, arch length measurement will be performed.

Mitä tutkimuksessa mitataan?

Ensisijaiset tulostoimenpiteet

Tulosmittaus
Toimenpiteen kuvaus
Aikaikkuna
Tooth mobility
Aikaikkuna: From enrollment to the end of treatment at 6 months
Tooth mobility will be assessed using the Periotest device. The device will be applied to the buccal surface of the tooth, and the Periotest value (PTV) will be recorded according to the manufacturer's instructions. Higher PTV values indicate greater tooth mobility. Measurements will be recorded as Periotest values (PTV).
From enrollment to the end of treatment at 6 months

Toissijaiset tulostoimenpiteet

Tulosmittaus
Toimenpiteen kuvaus
Aikaikkuna
Little irregularity
Aikaikkuna: From enrollment to the end of treatment at 6 months
Anterior dental irregularity will be assessed using Little's Irregularity Index, measured as the sum of the five linear displacements between the anatomic contact points of the mandibular anterior teeth, in millimeters (mm). This assessment will be performed on digital intraoral models by using Orthomodel (Orthomodel, İstanbul, Türkiye) software.
From enrollment to the end of treatment at 6 months
Arch length
Aikaikkuna: From enrollment to the end of treatment at 6 months
Dental arch length will be assessed by measuring the linear distance from the midpoint between the central incisors to a line connecting the distal surfaces of the first permanent molars, in millimeters (mm). This assessment will be performed on digital intraoral models by using Orthomodel (Orthomodel, İstanbul, Türkiye) software.
From enrollment to the end of treatment at 6 months

Yhteistyökumppanit ja tutkijat

Täältä löydät tähän tutkimukseen osallistuvat ihmiset ja organisaatiot.

Julkaisuja ja hyödyllisiä linkkejä

Tutkimusta koskevien tietojen syöttämisestä vastaava henkilö toimittaa nämä julkaisut vapaaehtoisesti. Nämä voivat koskea mitä tahansa tutkimukseen liittyvää.

Opintojen ennätyspäivät

Nämä päivämäärät seuraavat ClinicalTrials.gov-sivustolle lähetettyjen tutkimustietueiden ja yhteenvetojen edistymistä. National Library of Medicine (NLM) tarkistaa tutkimustiedot ja raportoidut tulokset varmistaakseen, että ne täyttävät tietyt laadunvalvontastandardit, ennen kuin ne julkaistaan ​​julkisella verkkosivustolla.

Opi tärkeimmät päivämäärät

Opiskelun aloitus (Todellinen)

Maanantai 15. kesäkuuta 2026

Ensisijainen valmistuminen (Arvioitu)

Perjantai 1. tammikuuta 2027

Opintojen valmistuminen (Arvioitu)

Maanantai 1. maaliskuuta 2027

Opintoihin ilmoittautumispäivät

Ensimmäinen lähetetty

Sunnuntai 19. heinäkuuta 2026

Ensimmäinen toimitettu, joka täytti QC-kriteerit

Sunnuntai 30. elokuuta 2026

Ensimmäinen Lähetetty (Todellinen)

Torstai 3. syyskuuta 2026

Tutkimustietojen päivitykset

Viimeisin päivitys julkaistu (Todellinen)

Torstai 3. syyskuuta 2026

Viimeisin lähetetty päivitys, joka täytti QC-kriteerit

Sunnuntai 30. elokuuta 2026

Viimeksi vahvistettu

Maanantai 1. kesäkuuta 2026

Lisää tietoa

Tähän tutkimukseen liittyvät termit

Muut tutkimustunnusnumerot

  • GKAY-ret

Yksittäisten osallistujien tietojen suunnitelma (IPD)

Aiotko jakaa yksittäisten osallistujien tietoja (IPD)?

PÄÄTTÄMÄTÖN

Nämä tiedot haettiin suoraan verkkosivustolta clinicaltrials.gov ilman muutoksia. Jos sinulla on pyyntöjä muuttaa, poistaa tai päivittää tutkimustietojasi, ota yhteyttä register@clinicaltrials.gov. Heti kun muutos on otettu käyttöön osoitteessa clinicaltrials.gov, se päivitetään automaattisesti myös verkkosivustollemme .

Tilaa